• Block Separation:
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 48
• Manufacturer: DELPHI
• Name: DE TD1616W

Fitting Position: Rear Axle, Lower, in front of axle, inner, Axle beam, Steering Knuckle, wheel suspension, outer

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Fitting Position: both sides, Rear Axle, inner
• Axle alignment required after fitting:
• Weight [kg]: 0.081
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46.5
• for OE number: 33326763092
• Manufacturer: SASIC

• Fitting Position: Rear Axle both sides, inner, Lower
• Required quantity: 2
• paired article number: VKDS 438513
• Length [mm]: 48
• Height [mm]: 46.3
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 46.3
• Name: SK VKDS438513
• Manufacturer: SKF

• Fitting Position: Rear Axle Middle, outer
• Weight [kg]: 0.288
• Packaging length [cm]: 4.9
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Weight [kg]: 0.149
• Packaging length [cm]: 4.8
• Packaging width [cm]: 4.7
• Packaging height [cm]: 4.7
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.25
• Name: DY 37-25508
• Manufacturer: DYS

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.24
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• for OE number: 33326765535
• paired article number: 2256091
• Manufacturer: SASIC

• Thickness [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45, 26
• Fitting Position: Rear Axle Left, Upper, Rear, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.232
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.261
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, outer, both sides
• Required quantity: 2
• Height 1 [mm]: 49.6
• Height 2 [mm]: 33.3
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: OPTIMAL ZAWIESZENIE

• Thickness [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Material: Rubber/Metal
• Control/Trailing Arm Type: for trailing arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Shape: slotted
• Weight [kg]: 0.112
• Manufacturer: FEBI BILSTEIN
• Additional information: FE32037
• Lisainfo: FE32037

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Material: Rubber/Metal
• Control/Trailing Arm Type: for trailing arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Shape: slotted
• Weight [kg]: 0.112
• Manufacturer: SWAG
• Name: SW 20 93 2037

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, outer
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 45
• Height [mm]: 50
• Name: ALT 87738AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45, 26
• Fitting Position: Rear Axle Left, Upper, Rear, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.261
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 46.5
• Inner Diameter [mm]: 12
• Height [mm]: 47
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Rear Axle both sides, Upper, Rear
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Height [mm]: 48
• Name: ALT 87737AL
• Manufacturer: ALTE AUTOMOTIVE

• Block Separation:
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: LEMFORDER

Fitting Position: Rear Axle, Upper, both sides, Front, outer, Centre, inner SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, outer, Upper
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 45
• Thickness 1 [mm]: 50
• Name: DE TD1124W
• Manufacturer: DELPHI

• Fitting Position: Rear Axle, Rear, inner, outer
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 46.5
• Width 1 [mm]: 25
• Width 2 [mm]: 48
• SVHC: No SVHC present!
• Name: LU 829057610
• Manufacturer: FAG

• Control/Trailing Arm Type: for control arm
• Axle alignment required after fitting:
• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.335
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• for OE number: 31120393540
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Upper, both sides, Front, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: LEMFÖRDER
• Name: LMI 2982001

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• for OE number: Part of 33326777980
• paired article number: 2256090
• Manufacturer: SASIC

• Fitting Position: both sides, Rear Axle, Upper, inner, outer
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 4
• Mounting Type: Rubber-Metal Mount
• Manufacturer: LEMFÖRDER
• Name: LMI 3058201

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Upper, Rear
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47
• Height [mm]: 55
• Name: ALT 91108AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear, outer
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower, both sides, inner
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Lower, Left, Right
• Required quantity: 2
• Name: COC 49402166
• Manufacturer: CORTECO

• Fitting Position: outer, Rear Axle both sides, Lower
• Required quantity: 2
• Rod/Strut: for suspension rod
• paired article number: VKDS 438511
• Height [mm]: 53.9
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 47.3
• Name: SK VKDS438511
• Manufacturer: SKF

• Fitting Position: Rear Axle Lower, Rear, inner
• Weight [kg]: 0.29
• Packaging length [cm]: 6.6
• Packaging width [cm]: 5.3
• Packaging height [cm]: 5.3
• Manufacturer: FEBEST

• Width [mm]: 55
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47.3
• Fitting Position: Rear Axle Left, Lower, Centre, Rear Axle Right
• Weight [kg]: 0.36
• Manufacturer: FEBI BILSTEIN
• Additional information: F26643
• Lisainfo: F26643

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, Lower, inner
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47
• Height [mm]: 54
• Name: ALT 84945AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Lower, Upper, outer, Centre
• Weight [kg]: 0.34
• Packaging length [cm]: 6.2
• Packaging width [cm]: 5.3
• Packaging height [cm]: 5.3
• Manufacturer: FEBEST

• Width [mm]: 55
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47.3
• Fitting Position: Rear Axle Left, Lower, Centre, Rear Axle Right
• Weight [kg]: 0.36
• Manufacturer: SWAG
• Name: SW 20 92 6643
• Lisainfo: 20 92 6643 SWA
• Additional information: 20 92 6643 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, both sides
• Height [mm]: 55.5
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 47
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: inner, Lower Front Axle, Front
• Weight [kg]: 0.346
• Mounting Type: Bushing
• Packaging length [cm]: 5.6
• Packaging width [cm]: 4.7
• Packaging height [cm]: 4.7
• Manufacturer: FEBEST

• Fitting Position: inner, Rear, Lower Front Axle
• Weight [kg]: 0.506
• Mounting Type: Hydro Mount
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Packaging height [cm]: 6.6
• Manufacturer: FEBEST

• Height [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEYLE

Fitting Position: inner, Upper, Rear Axle Right, Rear Axle Left, Rear

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Height [mm]: 66
• Name: ALT 88979AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Right, Front Axle Left
• Name: COC 49398960
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle
• Weight [kg]: 0.502
• Height 1 [mm]: 65
• Height 2 [mm]: 76
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 502
• Manufacturer: METALCAUCHO

• Fitting Position: Lower, Front Axle
• Weight [g]: 494
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Outer Length [mm]: 65
• Inner Length [mm]: 76
• Name: IM 1652
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47
• Height [mm]: 55
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Rear, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 338538
• Height [mm]: 66
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 70.2
• Name: SK VKDS338538
• Manufacturer: SKF

• Thickness [mm]: 66
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 0.434
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle
• Weight [kg]: 2.088
• Material: Rubber/Metal
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Rear, Left, Right
• Required quantity: 2
• Name: COC 49402162
• Manufacturer: CORTECO

• Fitting Position: Front Axle, inner, Lower, Rear
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 70
• Thickness 1 [mm]: 66
• Manufacturer: DELPHI
• Name: DE TD1735W

• Fitting Position: Rear Axle Middle, inner
• Weight [kg]: 0.31
• Packaging length [cm]: 4.8
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Fitting Position: Left, Upper, Right, Front Axle
• Mounting Type: Hydro Mount
• Weight [g]: 510
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Length [mm]: 76
• Name: IM 1647
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, both sides, Rear
• Mounting Type: Hydro Mount
• Outer Diameter [mm]: 70.3
• Inner Diameter [mm]: 12.2
• Length [mm]: 66
• Quantity per axle: 2
• Manufacturer: LEMFÖRDER
• Name: LMI 3464401
• Lisainfo: 34644 01 LEM
• Additional information: 34644 01 LEM

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Lower, inner, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: PU (Polyurethane)
• Required quantity: 2
• Supplementary Article/Info 2: with grease cap, with mounting manual
• Manufacturer: TEDGUM

• Fitting Position: Rear, Front Axle Left, Front Axle Right
• Height [mm]: 66
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Manufacturer: MEYLE

General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• SVHC: No SVHC present!
• Manufacturer: FAG