Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Suspension: for vehicles without bad road version
- Fitting Position: Front Axle
- Quantity per axle: 2
-
Name: KAITSEMTS/
KAITSEKUMM, AMORT - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Fitting Position: Front Axle
-
Inner Diameter [mm]: 70,
60 -
Name: Kaitsemts/
kaitsekumm, amort - Manufacturer: MAX
- Thickness [mm]: 125
-
Inner Diameter [mm]: 60,
70 - Material: Plastic
- Fitting Position: Front Axle
- Weight [kg]: 0.05
- Name: SW 20 93 4288
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Thickness [mm]: 80
- Required quantity: 2
- Weight [kg]: 0.06
- Manufacturer: VAICO
Suspension: for vehicles without M technology, for vehicles without sports suspension General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 125
-
Inner Diameter [mm]: 60,
70 - Material: Plastic
- Fitting Position: Front Axle
- Weight [kg]: 0.05
- Manufacturer: FEB
- Additional information: FE34288
- Lisainfo: FE34288
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E46/E81 03-
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 231
-
Supplementary Article/Info 2: with protective cap/
bellow - Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 230
- Fitting Position: Rear Axle
- Weight [kg]: 0.204
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Manufacturer: ZZVF
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Thickness [mm]: 230
- for OE number: 33 53 6 767 334
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Length [mm]: 108
- Weight [kg]: 0.16
- Packaging length [cm]: 10.7
- Packaging width [cm]: 3.3
- Packaging height [cm]: 3.3
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Suspension: for vehicles with M technology
- Fitting Position: Rear Axle
- Height [mm]: 220
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
-
Fitting Position: Front Axle,
Upper - Material: Rubber
-
Manufacturer: AUTO-
GH - Name: GH 621550
-
Fitting Position: Front Axle,
Lower - Material: Rubber
-
Manufacturer: AUTO-
GH - Name: GH 621549
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- for OE number: 6N0413175A
- Manufacturer: KAMOKA AMORTYZATORY
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA AMORTYZATORY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: JP GROUP
Suspension: for vehicles with M technology, for vehicles with sports suspension
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: POLCAR
ALFA ROMEO 33
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Name: CFD PK4780
- Manufacturer: DACO
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Name: CFD PK1510
- Manufacturer: DACO
- Suspension: for vehicles with M technology
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Thread Size: M14x1.5
- Screw length below head [mm]: 95
-
Supplementary Article/Info 2: with protect screen,
with groove - Manufacturer: ZZVF
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Name: CFD PK0302
- Manufacturer: DACO
- Construction Year from: 02.2006
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: DENCKERMANN AMORTYZATORY
- Suspension: for vehicles with standard suspension
- Weight [kg]: 0.05
-
Fitting Position: Rear Axle,
Lower -
Material: PU
(Polyurethane) - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Suspension: for vehicles with M technology
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with bellow
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW/FIAT/SKODA FABIA
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with M technology
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
BMW
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0126
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Additional information: KYB910084
- Lisainfo: KYB910084
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Additional information: 910172 KYB
- Lisainfo: 910172 KYB
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
Suspension: for vehicles without M technology, for vehicles without sports suspension, for vehicles without bad road version
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Weight [kg]: 0.3
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Fitting Position: Rear Axle
- Quantity per axle: 1
- Weight [g]: 202
- Component Number: 4
- Name: IM 50175
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Suspension: for vehicles with M technology
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- for SA code: S704A
- not for SA code: L807A
- Fitting Position: Rear Axle
- Weight [kg]: 0.276
- Packaging length [cm]: 16.5
- Packaging width [cm]: 12.4
- Packaging height [cm]: 6.3
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
Suspension: for vehicles with M technology, for vehicles with sports suspension
- Fitting Position: Rear Axle
- for OE number: 33503411995
- Manufacturer: AUTOFREN REPERATURKI
-
Name: SE D5-
132
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Lisainfo: 3146400004
- Additional information: 3146400004
- Fitting Position: Rear Axle
- Weight [kg]: 0.2
- for OE number: 33 52 8 036 000 S1
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: BIL
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: BIL
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: BIL
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: BIL
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: OPTIMAL ZAWIESZENIE