• Engine Code: N53 B30 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.830.272
• Manufacturer: EPS

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• for OE number: 13 62 7 525 014
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Fabrication Number: ECP-BM-005

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Name: CE 17SKV494
• Manufacturer: ESEN SKV

• Colour: black
• Number of pins: 3
• Fabrication Number: ECM-BM-005
• Manufacturer: NTY

Lisainfo: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10 Additional information: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Fitting Position: Intake Manifold
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Manufacturer: BREMI

• Fabrication Number: ESS-BM-001
• Number of pins: 4

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 22
• Name: DE PS20095-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Fitting Position: High Pressure Pump (high pressure side)
• Fabrication Number: EFP-BM-006
• Name: NTY EFP-BM-006
• Manufacturer: NTY

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Engine Code: N53 B30 A
• Required quantity: 2
• Name: EP 1.953.523
• Manufacturer: EPS

• Construction Year from: 09.2007
• Construction Year to: 10.2011
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 366149

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 340
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358221501
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Left
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Cable Length [mm]: 600
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11123

• Number of pins: 5
• Connector Shape: oval
• Fabrication Number: EPP-BM-017

• Number of pins: 3
• Colour: black
• Manufacturer: FAE

• Length [mm]: 49
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Name: CE 17SKV620
• Manufacturer: ESEN SKV

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 2
• for OE number: 13 62 8 617 097
• Manufacturer: MEAT&DORIA

• Required quantity: 2
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Fabrication Number: EPP-BM-030
• Number of pins: 5

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 614
• Manufacturer: DELPHI

• Construction Year from: 09.2007
• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N53B30U0
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Cable Length [mm]: 515
• Number of pins: 4
• Manufacturer: DELPHI

• Number of connectors: 4
• Cable Length [mm]: 535, 435
• Weight [kg]: 0.086
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Length [mm]: 910
• Fabrication Number: ESL-BM-020

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 4
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Name: CE 09SKV405
• Manufacturer: ESEN SKV

• Fabrication Number: EGT-BM-019
• Voltage [V]: 12
• Number of pins: 2

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Engine Code: N53 B30 A
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 560
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.325
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV905
• Manufacturer: ESEN SKV

• Thread Size: M10x1
• Spanner Size: 24
• Number of pins: 3
• Injection System: Common Rail
• Supplementary Article/Info 2: Low Pressure Side, with seal ring
• Housing Colour: black
• Connector Shape: oval
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 5
• Overall Length [mm]: 910
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year from: 09.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Number of circuits: 4
• Overall Length [mm]: 502
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Engine Code: N53 B30 A
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Required quantity: 1
• Length [mm]: 1,400
• Cable Length [mm]: 1,500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.482
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Number of pins: 9
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Name: CE 17SKV424
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Fitting Position: for cylinder 4-6, before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Length [mm]: 900
• Number of pins: 6
• Manufacturer: FAE

• Construction Year from: 09.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Number of circuits: 4
• Overall Length [mm]: 572
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year from: 09.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 5
• Overall Length [mm]: 1,400
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258017098

• Construction Year from: 09.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 5
• Overall Length [mm]: 910
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year from: 09.2007
• Construction Year to: 10.2011
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 950
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.18
• Manufacturer: VALEO
• Name: VA 368430

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Construction Year from: 09.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 5
• Overall Length [mm]: 1,400
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Number of pins: 9
• Weight [kg]: 0.1
• Warranty: 3 years warranty
• Name: CE 17SKV423
• Manufacturer: ESEN SKV

• Fitting Position: for cylinder 4-6, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 500
• Number of pins: 4
• Technical Information Number: Universal 77005
• Manufacturer: FAE

• Quantity: 1
• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10381-12B1
• Manufacturer: DELPHI

• Fitting Position: for cylinder 1-3, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 550
• Number of pins: 4
• Technical Information Number: Universal 77005
• Manufacturer: FAE

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142631

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2007
• Construction Year to: 10.2011
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 1,400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.207
• Name: VA 368226
• Manufacturer: VALEO

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Engine Code: N53 B30 A
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Supplementary Article/Supplementary Info: with control unit
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 5
• Lambda Sensor: Thread pre-greased
• Cable Length [mm]: 590
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 5
• Cable Length [mm]: 590
• Product must be determined on the vehicle or the motor:
• for manufacturer number: 5WK9 6610L
• Observe service information:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.