• Length [mm]: 66
• Number of connectors: 2
• Manufacturer: JP GROUP
• Lisainfo: Sensor, exterior temperature
• Additional information: Sensor, exterior temperature

• Length [mm]: 40
• Number of pins: 2
• Fabrication Number: ECT-BM-000
• Manufacturer: NTY
• Name: NTY ECT-BM-000

• Number of pins: 2
• Colour: black, grey
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Supplementary Article/Info 2: without sensor, without cable
• Supplementary Article/Supplementary Info: with socket housing
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 87
• Colour: black
• Fabrication Number: CZW-BM-017A
• Manufacturer: NTY
• Name: NTY CZW-BM-017A

• Length [mm]: 87
• Manufacturer: KAMOKA

• Length [mm]: 70
• Housing Colour: black
• Manufacturer: KAMOKA

• Colour: green
• Number of pins: 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 66
• Material: Plastic
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0303
• Additional information: 21-0303

• Number of pins: 2
• Fitting Position: outer
• Connector Shape: oval
• Housing material: Plastic
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Fabrication Number: ECT-BM-005
• Manufacturer: NTY

• Length [mm]: 87
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: MAX

• Length [mm]: 70
• Material: Plastic
• Number of pins: 2
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Length [mm]: 87
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.005
• Manufacturer: SWAG
• Name: SW 20 92 6115

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Fitting Position: Air duct
• Connector Shape: rectangular
• Fabrication Number: ECT-BM-009
• Manufacturer: NTY

• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: DLP

• Length [mm]: 87
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.005
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: FEB
• Additional information: FE26115
• Lisainfo: FE26115

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Colour: grey
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N 47
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.01
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV341
• Manufacturer: ESEN SKV

• Length [mm]: 68
• Number of pins: 2
• Name: Andur,salongitemperatuur
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Thread Size: M12x1.5
• for OE number: 13627797957
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Combi Switch Function: Reed Contact
• Length [mm]: 87
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: MEY

• Number of pins: 2
• Name: Andur,Jahutusvedelikutase
• Manufacturer: NRF

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 2
• Length [mm]: 87
• Manufacturer: METZGER

• Number of pins: 2
• Thread Size: M12 x 1,5
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Connector Shape: rectangular, angled
• Mounting Type: Clipped
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: N47 D20 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Resistor [Ohm]: 3,400
• Rated Temperature [°C]: 20
• Vehicle Equipment: for vehicles with air conditioning
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104151

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M12x1,5
• Number of pins: 2
• Mounting Type: Screw Connection
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT013113241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Emission Standard: Euro 4 (D4)
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Fabrication Number: EPO-BM-000
• Manufacturer: NTY
• Name: NTY EPO-BM-000

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-004
• Manufacturer: NTY

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 93 7032
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Number of pins: 3
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV290

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with screw, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: with screw
• Number of pins: 3
• Length [mm]: 113
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Number of pins: 2
• Height [mm]: 40
• Article number of recommended accessories: 2324021
• Quality: IAM
• Power [W]: 0.06
• Manufacturer: METZGER

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MEY

• Length [mm]: 68
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.005
• Name: ANDUR,SALONGITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Name: SW 20 92 6015
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: DLP

• Number of pins: 3
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU013122031

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 112.7
• Number of connectors: 3
• Supplementary Article/Info 2: with screw
• Name: SW 20 94 7292
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Alternative Repair Kit: 551677
• Manufacturer: ERA

• Emission Standard: Euro 4 (D4)
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV236

• Engine Code: N47 D20 A
• Construction Year from: 03.2009
• not for emission standard: Euro 3 (D3)
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Number of pins: 3
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: MAX
• Lisainfo: 12617508003/MG
• Additional information: 12617508003/MG

• Height [mm]: 85.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N47 D20 A
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of Holes: 3
• Manufacturer: ERA

• Length [mm]: 66
• Material: Plastic
• Supplementary Article/Supplementary Info: with holder, with shrink squeeze connector
• Number of pins: 2
• Supplementary Article/Info 2: with cable, with a plug
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N47D20C
• Length [mm]: 24.8
• Supplementary Article/Info 2: for camshaft, with seal ring, without cable
• Number of pins: 3
• Shape: L Shape
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 23
• Connector Shape: D Shape
• Corresponds to the original part in colour: black
• Weight [kg]: 0.023
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 03.2009
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N47 D20 A
• Construction Year from: 03.2009
• not for emission standard: Euro 3 (D3)
• Length [mm]: 111
• Number of connectors: 3
• Weight [kg]: 0.091
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 3907

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N47 D20 A
• Construction Year from: 03.2009
• not for emission standard: Euro 3 (D3)
• Length [mm]: 111
• Number of connectors: 3
• Weight [kg]: 0.091
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N47 D20 A
• Construction Year from: 03.2009
• not for emission standard: Euro 3 (D3)
• Length [mm]: 111
• Number of connectors: 3
• Weight [kg]: 0.092
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fabrication Number: EPO-BM-002

• for manufacturer exhaust norm: Euro 3
• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Weight [kg]: 0.18
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV628