• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: -40, 150
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Length [mm]: 66
• Number of connectors: 2
• Manufacturer: JP GROUP
• Lisainfo: Sensor, exterior temperature
• Additional information: Sensor, exterior temperature

• Fitting Position: Cylinder Head
• Length [mm]: 48
• Housing Colour: black
• Spanner Size: 22
• Manufacturer: KAMOKA

• Fabrication Number: ECT-BM-011
• Manufacturer: NTY

• Number of pins: 2
• Colour: black, grey
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Supplementary Article/Info 2: without sensor, without cable
• Supplementary Article/Supplementary Info: with socket housing
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 87
• Colour: black
• Fabrication Number: CZW-BM-017A
• Manufacturer: NTY
• Name: NTY CZW-BM-017A

• Length [mm]: 87
• Manufacturer: KAMOKA

Manufacturer: MAGNETI MARELLI

• Colour: green
• Number of pins: 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 66
• Material: Plastic
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0303
• Additional information: 21-0303

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Number of pins: 2
• Fabrication Number: ECT-BM-005
• Manufacturer: NTY

• Spanner Size: 22
• Colour: black
• Fitting Position: Cylinder Head
• Number of pins: 2
• Thread Size: M12x1,5
• Length [mm]: 49
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Length [mm]: 87
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: MAX

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Name: NI 207088
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• for OE number: 13 62 1 433 076
• Manufacturer: TRUCKTEC

• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Length [mm]: 87
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.005
• Manufacturer: SWAG
• Name: SW 20 92 6115

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Fitting Position: Air duct
• Connector Shape: rectangular
• Fabrication Number: ECT-BM-009
• Manufacturer: NTY

• Length [mm]: 87
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.005
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: FEB
• Additional information: FE26115
• Lisainfo: FE26115

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 48.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Colour: grey
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 68
• Number of pins: 2
• Name: Andur,salongitemperatuur
• Manufacturer: MAX

• Number of pins: 2
• Name: Andur,Jahutusvedelikutase
• Manufacturer: NRF

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: N53 B30 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Name: NI 207010
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Length [mm]: 48.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 2
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107851
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N53 B30 A
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Fabrication Number: ECP-BM-001
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour: black
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Manufacturer: NTY

• Voltage [V]: 12
• Resistor [Ohm]: 3,400
• Rated Temperature [°C]: 20
• Vehicle Equipment: for vehicles with air conditioning
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104151

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: without pipe
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Engine Code: N53 B30 A
• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550470
• Rated Voltage [V]: 12
• Manufacturer: ERA

• Engine Code: N53 B30 A
• Alternatively:
• Number of pins: 3
• Required quantity: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: for crankshaft
• Number of connectors: 3
• Rated Voltage [V]: 12
• Weight [kg]: 0.021
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MEY

• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: DLP

• Length [mm]: 68
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.005
• Name: ANDUR,SALONGITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Name: SW 20 92 6015
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Observe mounting information:
• only in connection with: M6X16-AL
• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Number of connectors: 3
• Weight [kg]: 0.025
• Name: SW 33 10 2687
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. BMW 3 E90 2,5 06-
• Manufacturer: BRM

• Number of connectors: 3
• Weight [kg]: 0.025
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor Type: Hall Sensor
• Height [mm]: 27.8
• Manufacturer: VERNET

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009163301
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Number of pins: 3

• Number of pins: 3
• Housing Colour: black
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Length [mm]: 66
• Material: Plastic
• Supplementary Article/Supplementary Info: with holder, with shrink squeeze connector
• Number of pins: 2
• Supplementary Article/Info 2: with cable, with a plug
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N53 B30 A
• Colour: black
• Number of pins: 3
• only in connection with: 13 62 7 530 413
• Bolt Head-/Nut Design: Male Torx
• Name: Andur, v„ntvoll
• Manufacturer: VDO

• Number of pins: 3
• Fabrication Number: EPO-BM-002

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Weight [kg]: 0.18
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV628