• Number of mounting bores: 2
• Supplementary Article/Info 2: with seal ring
• Name: Ž„rik, nukkvolli asendi andur
• Manufacturer: ELR

• Engine Code: N54 B30 A, N54B30A/N55B30A
• Fitting Position: Upper
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• for OE number: 13 62 7 525 014
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Fabrication Number: ECP-BM-005
• Manufacturer: NTY

• for OE number: 1362 7 585 493
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Number of mounting bores: 2
• Fabrication Number: ECM-BM-009
• Manufacturer: NTY

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Name: CE 17SKV494
• Manufacturer: ESEN SKV

• Engine Code: N54 B30 A
• Required quantity: 2
• Sensor Type: Active sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fabrication Number: ESS-BM-000
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Required quantity: 1
• Engine Code: N54B30A
• Number of pins: 4
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with seal
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009403241
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N54 B30 A
• Required quantity: 2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Engine Code: N55B30A,N54B30O0
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 366149

• Fitting Position: Left
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Cable Length [mm]: 600
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Engine Code: N54 B30 A, N55 B30 A
• Construction Year to: 02.2010
• Lambda Sensor: Diagnostic Probe, Finger probe
• Block Separation:
• Construction Year from: 03.2010
• Fitting Position: for cylinder 4-6, after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• for OE number: 13 62 7 525 014
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRU

• Length [mm]: 49
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Quantity: 1
• Engine Code: N55 B30 A
• Number of pins: 4
• Pressure from [kPA]: 20
• Manufacturer: DELPHI

• Construction Year from: 04.2011
• Engine Code: N55B30A
• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N54 B30 A
• Construction Year to: 08.2011
• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Name: CE 17SKV620
• Manufacturer: ESEN SKV

• External Thread Size: M10 x 1
• Number of connectors: 3
• Weight [kg]: 0.04
• Name: SW 33 10 6949
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121011
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N54 B30 A, N55 B30 A
• Fitting Position: Upper
• Block Separation:
• Lambda Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.086
• Name: SW 33 10 3200
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Engine Code: N55 B30 A
• Construction Year from: 03.2010
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 614
• Manufacturer: DELPHI
• Name: DE ES20368-12B1

• Engine Code: N54 B30 A, N55 B30 A
• Construction Year to: 02.2010
• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Construction Year from: 03.2010
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N55 B30 A
• Construction Year from: 03.2010
• Fuel Mixture Formation: Direct Injection
• Manufacturer Restriction: Hochdruckseite
• Version: AM
• Manufacturer: METZGER

• Engine Code: N55 B30 A, N55B30A
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: N54B30O0
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 4
• Manufacturer: FAE

• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 450
• for article number: 81633E
• Quality: OE EQUIVALENT
• Name: Lambda andur
• Manufacturer: MD

• Engine Code: N54 B30 A
• Construction Year to: 08.2011
• Version: Niederdrucksensor, AM
• Number of pins: 3
• Manufacturer: METZGER

• Number of pins: 4
• Connector Shape: oval
• Number of mounting bores: 2
• Pressure [Pa] from: 15,000
• Pressure [Pa] to: 250,000
• for OE number: 13627585493
• Manufacturer: METZGER

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Name: CE 09SKV405
• Manufacturer: ESEN SKV

• Housing Type: without housing
• Number of pins: 4
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: for cylinder 1-3, after catalytic converter
• Lambda Sensor: Planar probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 650
• Supplementary Article/Supplementary Info: with thermal protection
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: N54 B30 A
• Fitting Position: for cylinder 4-6, after catalytic converter
• Lambda Sensor: Planar probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 460
• Supplementary Article/Supplementary Info: with thermal protection
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: N54 B30 A, N54B30A
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 560
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV905
• Manufacturer: ESEN SKV

• Fitting Position: after catalytic converter
• Engine Code: N55 B30 A
• Cable Length [mm]: 735
• Lambda Sensor: Planar probe, Heated
• Name: DE ES20421-12B1
• Manufacturer: DELPHI

• Engine Code: N54 B30 A
• Construction Year to: 08.2011
• Thread Size: M10x1
• Spanner Size: 24
• Number of pins: 3
• Injection System: Common Rail
• Supplementary Article/Info 2: Low Pressure Side, with seal ring
• Housing Colour: black
• Connector Shape: oval
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N54 B30 A
• Construction Year to: 02.2010
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Number of circuits: 4
• Overall Length [mm]: 502
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N54 B30 A, N54B30A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Length [mm]: 1,400
• Cable Length [mm]: 1,500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.482
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: N55 B30 A
• Construction Year from: 03.2010
• Fitting Position: before catalytic converter
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Number of pins: 9
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Name: CE 17SKV424
• Manufacturer: ESEN SKV

• Engine Code: N54 B30 A
• Construction Year to: 02.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Number of circuits: 5
• Overall Length [mm]: 1,400
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N54 B30 A
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Number of pins: 5
• Cable Length [mm]: 1,290
• for article number: 81668E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: N55 B30 A
• Construction Year from: 03.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 685
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N54 B30 A
• Fitting Position: for cylinder 4-6, before catalytic converter
• Lambda Sensor: Broadband lambda sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 1,300
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: N54 B30 A
• Construction Year to: 02.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Number of circuits: 5
• Overall Length [mm]: 1,200
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 9
• Weight [kg]: 0.1
• Warranty: 3 years warranty
• Name: CE 17SKV423
• Manufacturer: ESEN SKV

• Fitting Position: for cylinder 4-6, after catalytic converter
• Construction Year to: 02.2010
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 500
• Number of pins: 4
• Technical Information Number: Universal 77005
• Manufacturer: FAE

• for SA code: S205A, S2TCA
• Transmission Type: Automatic Transmission
• Colour: black
• Operating Mode: Electric
• Number of pins: 6
• Material: Plastic
• Supplementary Article/Info 2: with holding frame
• Manufacturer: METZGER

• Fitting Position: for cylinder 1-3, after catalytic converter
• Construction Year to: 02.2010
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 550
• Number of pins: 4
• Technical Information Number: Universal 77005
• Manufacturer: FAE