Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)


-
Fitting Position: Rear Axle Lower,
inner, Lower - Manufacturer: GSP ZAWIESZENIE



- Control/Trailing Arm Type: for control arm
- Required quantity: 2
-
Fitting Position: inner,
Rear Axle, both sides, Lower - Weight [kg]: 0.19
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 53.3
- Manufacturer: TEDGUM


-
Fitting Position: Rear Axle both sides,
inner, Lower - Required quantity: 2
- paired article number: VKDS 438513
- Length [mm]: 48
- Height [mm]: 46.3
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 46.3
- Manufacturer: SKF
- Name: SK VKDS438513


- Block Separation:
- Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 48
- Manufacturer: DELPHI
- Name: DE TD1616W
Fitting Position: Rear Axle, Lower, in front of axle, inner, Axle beam, Steering Knuckle, wheel suspension, outer




























































- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: both sides,
Rear Axle, inner - Axle alignment required after fitting:
- Weight [kg]: 0.081
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Fitting Position: Rear Axle
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46.5
- for OE number: 33326763092
- Manufacturer: SASIC



-
Fitting Position: Rear Axle Middle,
outer - Weight [kg]: 0.288
- Packaging length [cm]: 4.9
- Packaging width [cm]: 4.4
- Packaging height [cm]: 4.4
- Manufacturer: FEBEST


- Thickness [mm]: 48
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Material: Rubber/
Metal - Control/Trailing Arm Type: for trailing arm
-
Fitting Position: Rear Axle Left,
Lower, Front, Rear Axle Right - Shape: slotted
- Weight [kg]: 0.112
- Manufacturer: FEBI
- Additional information: FE32037
- Lisainfo: FE32037
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.25
-
Name: DY 37-
25508 - Manufacturer: DYS


- Weight [kg]: 0.234
-
Fitting Position: Rear Axle both sides,
Upper, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 45.2
- Length [mm]: 49.5
- Manufacturer: RTS


-
Fitting Position: Rear Axle Lower,
Centre - Manufacturer: GSP ZAWIESZENIE


-
Fitting Position: Rear Axle,
Upper - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 45
- for OE number: 33326765535
- paired article number: 2256091
- Manufacturer: SASIC


- Thickness [mm]: 71
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 46,
23 -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.252
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: Rear Axle,
Upper - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 45
- for OE number: 33326765534
- Manufacturer: SASIC



-
Fitting Position: Rear Axle,
Upper, Front, outer, Centre, inner - Block Separation:
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 45.2
- Width 1 [mm]: 50
- Width 2 [mm]: 33
- SVHC: No SVHC present!
- Manufacturer: FAG


-
Fitting Position: Front Axle both sides,
Lower, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for trailing arm
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 46.2
- Length [mm]: 71
- Weight [kg]: 0.256
- Manufacturer: RTS


-
Fitting Position: Rear Axle both sides,
outer - Inner Diameter [mm]: 27
- Outer Diameter [mm]: 45
- Height [mm]: 50
- Name: ALT 87738AL
- Manufacturer: ALTE AUTOMOTIVE


- Weight [kg]: 0.112
-
Fitting Position: Rear Axle both sides,
Lower, Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
- Length [mm]: 48
- Manufacturer: RTS


-
Fitting Position: Rear Axle,
outer, Upper - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 45
- Thickness 1 [mm]: 50
- Manufacturer: DELPHI
- Name: DE TD1124W


- Thickness [mm]: 48
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Material: Rubber/
Metal - Control/Trailing Arm Type: for trailing arm
-
Fitting Position: Rear Axle Left,
Lower, Front, Rear Axle Right - Shape: slotted
- Weight [kg]: 0.112
- Name: SW 20 93 2037
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: Rear Axle both sides,
Upper, Rear - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 45
- Height [mm]: 48
- Name: ALT 87737AL
- Manufacturer: ALTE AUTOMOTIVE



-
Fitting Position: Rear Axle,
Rear, inner, outer - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 46.5
- Width 1 [mm]: 25
- Width 2 [mm]: 48
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829057610


- Block Separation:
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: LEMFORDER
Fitting Position: Rear Axle, Upper, both sides, Front, outer, Centre, inner


-
Fitting Position: Rear Axle,
Upper, both sides, Front, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: LEMFORDER


-
Fitting Position: Rear,
inner, Lower, Front Axle both sides - Required quantity: 2
- Rod/Strut: for pull rod
- paired article number: VKDS 338543
- Name: SK VKDS338543
- Manufacturer: SKF


- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47.2
-
Fitting Position: Rear Axle,
outer, Lower, both sides - Required quantity: 2
- Weight [kg]: 0.302
- Control/Trailing Arm Type: for control arm
- Manufacturer: TEDGUM


-
Fitting Position: Front Axle,
both sides, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Length [mm]: 71
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 12
- Manufacturer: LEMFORDER
- Name: LMI 3620301
SVHC: No information available, please contact the manufacturer!


-
Fitting Position: both sides,
Rear Axle, Upper, inner, outer - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: LEMFORDER
- Name: LMI 3058201


-
Fitting Position: inner,
Front Axle Right, Front Axle Left - Name: COC 49398162
- Manufacturer: CORTECO


-
Fitting Position: Rear Axle,
Upper - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 45
- for OE number: Part of 33326777980
- paired article number: 2256090
- Manufacturer: SASIC
- Additional information: 2256091 SASIC
- Lisainfo: 2256091 SASIC


-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear, outer - Manufacturer: LEMFORDER
- Name: LMI 3468401


-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- for OE number: 31120393540
- Manufacturer: SASIC


-
Fitting Position: Rear Axle Lower,
both sides, inner -
Mounting Type: Rubber-
Metal Mount - Length [mm]: 48
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!


- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)"





















































-
Fitting Position: Rear Axle Lower,
Rear, inner - Weight [kg]: 0.29
- Packaging length [cm]: 6.6
- Packaging width [cm]: 5.3
- Packaging height [cm]: 5.3
- Manufacturer: FEBEST


-
Fitting Position: Rear Axle both sides,
inner - Required quantity: 2
- Rod/Strut: for camber strut
- paired article number: VKDS 438512
- Name: SK VKDS438512
- Manufacturer: SKF



-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Control Arm-
/ Trailing Arm Bush -
Additional information: Control Arm-
/ Trailing Arm Bush


- Weight [kg]: 0.206
-
Fitting Position: Rear Axle both sides,
Lower, Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 53.3
- Length [mm]: 65
- Manufacturer: RTS



-
Fitting Position: Front Axle Left,
Front Axle Right, Upper - Mounting Type: Hydro Mount
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front


-
Fitting Position: Front Axle,
Lower, Front - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 70
- Thickness 1 [mm]: 76
- Manufacturer: DELPHI
- Name: DE TD861W


-
Fitting Position: Rear Axle both sides,
Lower, inner - Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 47.3
- Height [mm]: 53.9
- Name: ALT 91108AL
- Manufacturer: ALTE AUTOMOTIVE


-
Fitting Position: Rear Axle Right,
Rear Axle Left, Lower, outer - Name: COC 49398521
- Manufacturer: CORTECO








-
Fitting Position: outer,
Rear, Lower, Rear Axle, both sides - Height [mm]: 55
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Bearing Type: Uniball pivot bearing
- Manufacturer: OPTIMAL ZAWIESZENIE


-
Fitting Position: Rear Axle both sides,
Lower, inner - Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 47.3
- Height [mm]: 53.9
- Name: ALT 84945AL
- Manufacturer: ALTE AUTOMOTIVE


- Width [mm]: 55
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47.3
-
Fitting Position: Rear Axle Left,
Lower, Centre, Rear Axle Right - Weight [kg]: 0.36
- Manufacturer: FEBI BILSTEIN
- Additional information: F26643
- Lisainfo: F26643
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: inner,
Lower, Front, Front Axle both sides - Required quantity: 2
- Rod/Strut: for pull rod
- paired article number: VKDS 338500
- Height [mm]: 76
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 70
- Manufacturer: SKF
- Name: SK VKDS338500


- Width [mm]: 55
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47.3
-
Fitting Position: Rear Axle Left,
Lower, Centre, Rear Axle Right - Weight [kg]: 0.36
- Name: SW 20 92 6643
- Manufacturer: SWAG
- Lisainfo: 20 92 6643 SWA
- Additional information: 20 92 6643 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- SVHC: No SVHC present!
- Manufacturer: FAG


-
Fitting Position: Rear,
Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 338538
- Height [mm]: 66
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 70.2
- Name: SK VKDS338538
- Manufacturer: SKF


- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)"


- Thickness [mm]: 76
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Front, Front Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.494
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



-
Fitting Position: Rear Axle Middle,
inner - Weight [kg]: 0.31
- Packaging length [cm]: 4.8
- Packaging width [cm]: 4.5
- Packaging height [cm]: 4.5
- Manufacturer: FEBEST


-
Fitting Position: Lower,
Front Axle - Weight [g]: 494
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- Outer Length [mm]: 65
- Inner length [mm]: 76
- Name: IM 1652
- Manufacturer: ORIGINAL IMPERIUM



- Shore-A hardness value, base body: 80
- Supplementary Article/Info 2: with grease cap
- Weight [kg]: 0.135
- Control/Trailing Arm Type: for control arm
- Colour: red
-
Material: PU
(Polyurethane) - Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 45.2
- Manufacturer: TEDGUM
Fitting Position: both sides, Rear Axle, outer, Front, inner, Rear, Lower


-
Fitting Position: Front Axle,
both sides, Front, inner - Mounting Type: Hydro Mount
- Control/Trailing Arm Type: for control arm
- Manufacturer: LEMFORDER
- Name: LMI 3780701
SVHC: No information available, please contact the manufacturer!



-
Fitting Position: inner,
Lower Front Axle, Front - Weight [kg]: 0.561
- Mounting Type: Hydro Mount
- Packaging length [cm]: 7.6
- Packaging width [cm]: 7
- Packaging height [cm]: 7
- Manufacturer: FEBEST


- Weight [kg]: 0.454
-
Fitting Position: Front Axle,
Lower, Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 14.3
- Outer Diameter [mm]: 68.2
- Length [mm]: 60
- Manufacturer: RTS


-
Fitting Position: both sides,
Front Axle, inner, Rear, Lower - Colour: yellow
- Supplementary Article/Info 2: with grease cap
- Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.305
- Outer Diameter [mm]: 48.3
- Inner Diameter [mm]: 12
-
Material: PU
(Polyurethane) - Required quantity: 2
- Shore-A hardness value, base body: 90
- Manufacturer: TEDGUM_TD




- Weight [kg]: 0.358
- Shore-A hardness value, base body: 80
-
Fitting Position: Front Axle,
Upper, both sides - Supplementary Article/Info 2: with grease cap
- Control/Trailing Arm Type: for control arm
- Colour: red
-
Material: PU
(Polyurethane) - Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70.7
- Manufacturer: TEDGUM
- Name: TG TED11278


- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 70
- Length [mm]: 76
- Mounting Type: Hydro Mount
- paired article number: 270748
- Weight [kg]: 0.47
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner


- Mounting Type: Rubber Mount
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle both sides,
Lower, Front - Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 70
- Length [mm]: 76
- Weight [kg]: 0.441
- Manufacturer: RTS


- Colour: yellow
-
Material: PU
(Polyurethane) -
Control/Trailing Arm Type: for control arm,
for semi- trailing arm - Required quantity: 2
- Outer Diameter [mm]: 45.4
- Weight [kg]: 0.278
- Supplementary Article/Info 2: with grease cap
-
Fitting Position: both sides,
Rear Axle Upper, outer - Shore-A hardness value, base body: 90
- Inner Diameter [mm]: 12
- Manufacturer: TEDGUM_TD


- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - SVHC: No SVHC present!
- Manufacturer: FAG



- Required quantity: 1
- Number of Parts [parts]: 16
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 3.312
- Supplementary Article/Info 2: with grease cap
- Manufacturer: TEDGUM_TD