• Engine Code: N47 D20 C
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Engine Code: N47 D20 C
• Colour: brown
• Pressure to [bar]: 0.5
• Pressure from [bar]: 0.2
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: N47 D20 C
• Colour: brown
• Pressure to [bar]: 0.5
• Pressure from [bar]: 0.2
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Pressure [bar]: 5
• Housing Colour: brown
• Thread Size: M12×1.5?6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90027
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Thread Size: M12x1,5
• Colour: brown
• Weight [kg]: 0.043
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Colour: black
• Fabrication Number: ECT-BM-001
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Thread Size: M12x1.5
• for OE number: 13627797957
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Quantity: 1
• Number of pins: 2
• Housing Colour: black
• Name: DE TS10517
• Manufacturer: DELPHI

• Number of pins: 2
• Thread Size: M12 x 1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N47 D20 C
• Thread Size: M12x1,5
• Manufacturer: FACET

• Engine Code: N47 D20 C
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-003
• Manufacturer: NTY

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-004
• Manufacturer: NTY

• Number of connectors: 2
• Weight [kg]: 0.007
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB
• Additional information: FE171622
• Lisainfo: FE171622

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12x1,5
• Number of pins: 2
• Mounting Type: Screw Connection
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N47 D20 C
• Required quantity: 1
• Manufacturer: FACET

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Height [mm]: 28.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Number of pins: 2
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009109351

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N47 D20 C
• Required quantity: 1
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 2
• Housing Colour: black
• Connector Shape: rectangular
• Manufacturer: FAE

• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: DLP

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• Thread Size: 12 mm
• Manufacturer: VERNET

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 2
• Housing Colour: black
• Connector Shape: oval
• Manufacturer: FAE

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366188

• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU013122031

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Height [mm]: 85.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N47 D20 C
• Manufacturer: FACET

• Engine Code: N47 D20 C
• Required quantity: 1
• Manufacturer: FACET

• Engine Code: N47 D20 C
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: N47 D20 C
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Housing Type: with housing
• Fabrication Number: EPP-BM-012
• Manufacturer: NTY

• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 380
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV407

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 420
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV426

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Length [mm]: 555
• Number of pins: 5
• Connector Shape: D Shape
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Heated
• Length [mm]: 420
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 420
• Manufacturer: MAGNETI MARELLI

• for OE number: 000 094 2048
• Manufacturer: TRUCKTEC

• Quality: OE EQUIVALENT
• for OE number: 0281002585
• Manufacturer: MEAT & DORIA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N47 D20 C
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: N47 D20 C
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before soot particulate filter
• Oxygen Sensor: Broadband oxygen sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 400
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Resistor Type: Hot-wire Sensor
• Number of connectors: 4
• Weight [kg]: 0.19
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 655
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 420
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• alternative OE number: 13628506409
• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 4
• Suction pipe connector diameter [mm]: 80
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Version: 2
• Quantity: 1
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10639-12B1

• alternative OE number: 13628509724
• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 5
• Pipe socket mounting diameter [mm]: 80
• Supplementary Article/Supplementary Info: without gasket/seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET358095261

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for special equipment code: S205A, S2TCA
• Transmission Type: Automatic Transmission
• Colour: black
• Operating Mode: Electric
• Number of pins: 6
• Material: Plastic
• Supplementary Article/Info 2: with holding frame
• Manufacturer: METZGER

• Engine Code: N47 D20 C
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Engine Code: N47 D20 C
• Oxygen Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 700
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring