• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: JPN

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Number of connectors: 3
• Weight [kg]: 0.09
• Name: SW 33 11 1698
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.03
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before turbocharger
• Pressure [Pa] from: 13,600
• Pressure [Pa] to: 400,000
• Manufacturer: NRF

• Number of pins: 3
• Manufacturer: JPN

• Exhaust System: before soot particulate filter
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for facelift:
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV801

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: after soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV665

• Number of connectors: 3
• Material: Plastic
• Name: SW 20 94 7155
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N47 D20 C
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV873
• Manufacturer: ESEN SKV

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV350
• Manufacturer: ESEN SKV

• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 89.9
• Manufacturer: DELPHI
• Name: DE DPS00004

• Exhaust System: before turbocharger
• Number of pins: 3
• Opening pressure [kPa]: 42
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 116D, 118D, X6 XDRIVE 40D 04-

• for OE number: 13627808013
• Number of pins: 3
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Weight [kg]: 0.03
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 13 62 8 507 634
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fabrication Number: ECS-BM-005
• Manufacturer: NTY

• Engine Code: N47 D20 C
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: N47 D20 C
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 551455
• Manufacturer: ERA

• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• Engine Code: N47 D20 C
• Exhaust System: before turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Manufacturer: FACET

• Engine Code: N47 D20 C
• Exhaust System: before turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 3, 1
• Connector Shape: oval
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Cable Length [mm]: 460
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV449

• Fitting Position: after soot particulate filter
• Number of connectors: 1
• Number of pins: 3
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of connectors: 2
• Number of pins: 3
• Fitting Position: before soot particulate filter
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Cable Length [mm]: 590
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV448

• Fitting Position: before catalytic converter
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 12
• Thread Size: M12x1.25
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Thread Size: M12x1.25
• Number of pins: 2
• Fabrication Number: EGT-BM-004
• Cable Length [mm]: 375
• Manufacturer: NTY

Manufacturer: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI

• Engine Code: N47 D20 C
• Vehicle configuration line / variant: Blue Performance
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Fabrication Number: EGT-BM-023
• Cable Length [mm]: 597
• Number of pins: 2
• Sensor Type: NTC Sensor
• for OE number: 13628507629
• Manufacturer: NTY

• Fitting Position: before catalytic converter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 370
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT010376571

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: before exhaust turbocharger
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Voltage [V]: 12
• Cable Length [mm]: 400
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV104
• Manufacturer: ESEN SKV

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 13627808013
• Manufacturer: MEAT & DORIA

• Fitting Position: before soot particulate filter
• Number of pins: 2
• Cable Length [mm]: 400
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 380
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: EGR valve at manifold
• Cable Length [mm]: 375
• Overall Length [mm]: 466
• Number of pins: 2
• Manufacturer: METZGER

• for facelift:
• Fitting Position: Exhaust Manifold
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

• Fitting Position: after catalytic converter
• Cable Length [mm]: 310
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.07
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV451

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV407

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 420
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: before catalytic converter
• Cable Length [mm]: 370
• Number of pins: 2
• Name: DE TS30034-12B1
• Manufacturer: DELPHI

• Fitting Position: after catalytic converter
• Shape: straight
• Connector Shape: oval
• Cable Length [mm]: 265
• Socket colour: black
• Number of pins: 2
• Manufacturer: METZGER

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV426

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Length [mm]: 555
• Number of pins: 5
• Connector Shape: D Shape
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Heated
• Length [mm]: 420
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 420
• Manufacturer: MAGNETI MARELLI

• Engine Code: N47 D20 C
• Fitting Position: Particulate Filter
• Number of pins: 2
• Version: IAM
• Manufacturer: METZGER

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N47 D20 C
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: N47 D20 C
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: after soot particulate filter
• Number of pins: 2
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• Oxygen Sensor: Broadband oxygen sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 400
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 655
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 420
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N47 D20 C
• Oxygen Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 700
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE