• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 575
• Number of wear indicators [per axle]: 1
• Net weight [kg]: 0.03

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.05

• Construction Year to: 08.1999
• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Brake System: ATE
• Weight [kg]: 0.1

• Fitting Position: Front Axle
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-6
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M8x1.25 16,0mm Hex-6 2tk
• Additional information: M8x1.25 16,0mm Hex-6 2tk

• Fitting Position: Rear Axle
• Brake System: Ate
• Name: Lisakomplekt,Pidurisadul
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: Ate
• Manufacturer: ERT

• Fitting Position: Rear Axle
• Brake System: Ate
• Manufacturer: AUTOFREN SEINSA
• Additional information: D42483A
• Lisainfo: D42483A

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-6
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Rear Axle
• Length [mm]: 620
• Weight [kg]: 0.018
• Brake Type: Disc Brake
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Length [mm]: 15.7
• Thread Size: M8X1,25
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Hexagon Socket
• Available as universal article as well, see article no.: TPM1000
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 585
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0205A

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 570
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Length [mm]: 580
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901201

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.018
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 570
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.026
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0295
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Construction Year from: 09.1998
• Fitting Position: Front Axle
• Length [mm]: 569
• Brake Type: Disc Brake
• Manufacturer: LPR

• Length [mm]: 580
• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.01
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 625
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Warning Contact Length [mm]: 570
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 570
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 620
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 625
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 09.1998
• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 569
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Number of wear indicators [per axle]: 1
• Name: BR A 00 233
• Manufacturer: BREMBO

• Construction Year from: 09.1998
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 570
• Packaging length [cm]: 26
• Packaging width [cm]: 15
• Packaging height [cm]: 1
• Weight [kg]: 0.022
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle
• Brake System: Brembo
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Packaging length [cm]: 26
• Packaging width [cm]: 15
• Packaging height [cm]: 1
• Weight [kg]: 0.019
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: QBK
• Additional information: QB109-1223
• Lisainfo: QB109-1223

• Construction Year from: 09.1998
• Fitting Position: Front Axle
• Manufacturer: ATE

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-BM-016
• Manufacturer: NTY

• Construction Year from: 09.1998
• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 550
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 1,030
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Left, Front Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Length [mm]: 660
• Height [mm]: 25
• Colour: blue
• Cable Length [mm]: 630
• Sensor Type: Hall Sensor
• Number of pins: 2
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 1,029
• MAPP code available:
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-BM-014
• Manufacturer: NTY

• Transmission Type: Automatic Transmission
• Construction Year from: 09.1998
• Sensor Type: Active sensor
• Required quantity: 2
• Cable Length [mm]: 610
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year from: 09.1998
• Sensor Type: Active sensor
• Required quantity: 2
• Cable Length [mm]: 1,070
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front
• Length [mm]: 600
• Number of pins: 2
• Connector Shape: round
• Voltage [V]: 12
• Weight [kg]: 0.08
• Colour: blue
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV081

• Fitting Position: Front Axle
• Construction Year to: 08.1999
• Cable Length [mm]: 535
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year to: 08.1998
• Fitting Position: Front Axle
• Cable Length [mm]: 605
• Fitting Depth [mm]: 25.5
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Construction Year to: 08.1998
• Fitting Position: Rear Axle
• Cable Length [mm]: 995
• Fitting Depth [mm]: 35
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear
• Length [mm]: 970
• Number of pins: 2
• Connector Shape: round
• Voltage [V]: 12
• Weight [kg]: 0.1
• Colour: blue
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 06SKV066
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Cable Length [mm]: 535
• Fitting Depth [mm]: 25.4
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 930
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear Axle
• Cable Length [mm]: 935
• Fitting Depth [mm]: 34.5
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 535
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Construction Year from: 09.1998
• Engine Code: M57 D30 (306D1)
• Fitting Position: Front Axle
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Construction Year from: 09.1998
• Sensor Type: Active sensor
• Cable Length [mm]: 1,030
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Length [mm]: 1,070
• Number of connectors: 2
• Colour: blue, black
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.062
• Name: SW 20 93 1533
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Left, Front Axle
• Cable Length [mm]: 650
• Name: SN ASB150.23
• Manufacturer: NTN-SNR

• Fitting Position: Rear Axle
• Construction Year from: 09.1998
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 992
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Right, Left, Rear Axle
• Cable Length [mm]: 1,030
• Name: SN ASB150.22
• Manufacturer: NTN-SNR

• Construction Year from: 09.1998
• Fitting Position: Front Axle
• Required quantity: 2
• Sensor Type: Hall Sensor
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,070
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH