• Lambda andur: Sond
• Kaablipikkus (mm): 340
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Installatsiooni pool: katalüsaatori ees
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 295
• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Lambda andur: Sond
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Installatsiooni pool: pärast katalüsaatorit
• Ülekandeliinide arv: 4
• Lülituspunkt [°C]: 98
• Kaablipikkus (mm): 1 000
• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Lambda andur: soojendatud
• Manufacturer: JP GROUP A/S
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Pistikkontaktide arv: 4
• Pistiku värv: must
• Pistikukatte kuju: ümar
• Keermemõõt: M12x1,5
• Anduritüüp: NTC-andur
• Võtmekaugus: 22 mm
• OE-numbri jaoks: 13 62 1 703 993, MEK100160
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 2
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Pins'ide arv: 2
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV689

Manufacturer: DELPHI

• Pistikkontaktide arv: 2
• Pikkus (mm): 79
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Engine Code: M62 B35 (358S1)
• Cooling Hose: from connecting pipe to engine cooler
• Manufacturer: FACET

• Engine Code: M62 B35 (358S1)
• Cooling Hose: from connecting pipe to engine cooler
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Engine Code: M62 B35 (358S1)
• Manufacturer: FACET

• Engine Code: M62 B35 (358S1)
• Name: EP 1.994.027
• Manufacturer: EPS

• Seerianumber: ECP-BM-020
• Manufacturer: NTY

• Montaaživiis: pistetud
• Pinge [V]: 12
• Pistikkontaktide arv: 2
• Anduritüüp: NTC-andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Name: HE 6PT009309541
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pikkus (mm): 400
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Seerianumber: ECP-BM-021
• Manufacturer: NTY

• Pistikkontaktide arv: 3
• Rakendustüüp: mehhaaniliselt
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: DLP

• Engine Code: M62 B35 (358S1)
• Kasutuspinge [V]: 12
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Pinge [V]: 12
• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M62 B35 (358S1)
• Fitting Position: Engine Block
• Keermemõõt: M12x1,5
• Võtmekaugus: 22
• Manufacturer: FACET

• Engine Code: M62 B35 (358S1)
• Fitting Position: Engine Block
• Keermemõõt: M12x1,5
• Võtmekaugus: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Keermemõõt: 13 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Kõrgus (mm): 65,9
• Keermemõõt: M12x1,5
• valikuliselt:
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Kaal (kg): 0,028
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• OE-numbri jaoks: 12 14 7 539 166, 8510301
• Manufacturer: MEAT&DORIA

• Engine Code: M62
• Pinge [V]: 12
• Pikkus (mm): 305
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV238

• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos kaabliga, koos klambriga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Length [mm]: 370
• Fabrication Number: ESL-BM-003
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Anduritüüp: Aktiivne andur
• Installatsiooni sügavus (mm): 21
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Pistikkontaktide arv: 3
• Name: Andur,drosselklapiasend
• Manufacturer: MAX

• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,03
• ilma ECE/ABE heakskiiduta:
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 17SKV607
• Manufacturer: ESEN SKV

• Pikkus (mm): 390
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 28
• Manufacturer: ERA

• OE-numbri jaoks: 12 14 1 742 185
• Manufacturer: TRUCKTEC

• Anduritüüp: Hallsensor
• Kaablipikkus (mm): 385
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Manufacturer: JAPKO

• Engine Code: M62 B35 (358S1)
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Pikkus (mm): 340
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Pikkus (mm): 360
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 21
• Manufacturer: ERA

• Required quantity: 1
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 365
• Installatsiooni sügavus (mm): 21
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Required quantity: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: must
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 5 E39 4,0 97-
• Manufacturer: BRM

• Takistus [oom]: 2,1
• Pikkus (mm): 350
• Ülekandeliinide arv: 4
• Ühendushulk: 4
• Kaablipikkus (mm): 350
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Fitting Position: Left
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Pikkus (mm): 385
• Kaablipikkus (mm): 365
• Ühenduste arv: 3
• Piirangutega toode/piirangu info 2: nukkvõlli jaoks
• Anduritüüp: Aktiivne andur
• Pistikkontaktide arv: 3
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 28
• Kaal (kg): 0,06
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M62 B35 (358S1)
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Pikkus (mm): 290
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe
• Engine Code: M62 B35 (358S1)
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 430
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV080

• Ühendushulk: 4
• Takistus [oom]: 2,1
• Ülekandeliinide arv: 4
• Pikkus (mm): 300
• Kaablipikkus (mm): 300
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 350
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 2,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 350
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 2,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV678

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Exhaust System: for pre-catalytic converter
• Kaablipikkus (mm): 300
• Lambda andur: Sõrmesensor, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 450
• Lambda andur: Sõrmesensor, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Kaablipikkus (mm): 295
• Pistikkontaktide arv: 4
• Lambda andur: soojendatud
• Pinge [V]: 12
• Keermemõõt: M18 x 1,5
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Lambda andur: soojendatud
• Ühendushulk: 4
• Kaablipikkus (mm): 350
• Manufacturer: PIERBURG

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: M62 B35 (358S1)
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Lambda andur: Sõrmesensor, soojendatud, Keere eelmääritud
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Pikkus (mm): 350
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pinge [V]: 12
• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Garantii: 3 aastat garantii
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 0,29
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Construction Year from: 10.1997
• Pistikkontaktide arv: 4
• Korpusevärv: must
• Manufacturer: FAE

• Quantity: 2
• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Keermemõõt: M18 x 1,5
• Pistikukatte kuju: ümar
• Ühendushulk: 4
• Pikkus (mm): 300
• Ülekandeliinide arv: 4
• Kaal (kg): 0,123
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Pikkus (mm): 350
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Ühenduste arv: 3
• Nominaalpinge (V): 5
• Kaal (kg): 0,024
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 4
• Montaaživiis: Bajonett
• Pistikukatte kuju: ümar
• Korpuse materjal: Plastik
• soovitatav remondimahtu suurendamine: Õhufilter
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 09.1997
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 370
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Pinge [V]: 12
• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 0,35
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ESEN SKV

• Construction Year from: 04.1996
• Engine Code: M62B35
• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 350
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Manufacturer: VALEO

• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 4
• Name: Ohumassimootja
• Manufacturer: MAX

• Anduritüüp: Hallsensor
• Kaablipikkus (mm): 280
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Construction Year from: 04.1996
• Engine Code: M62B35
• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 300
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Manufacturer: VALEO

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 580
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 4
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Construction Year from: 10.1997
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Rakendustüüp: elektriline
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Pikkus (mm): 390
• Kaal (kg): 0,044
• Piirangutega toode/piirangu info 2: nukkvõlli jaoks
• Manufacturer: VEMO