• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer Restriction: ATE
• Weight [kg]: 0.07

• Construction Year from: 06.2012
• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 1,002
• Required quantity: 1

• Thread Size: M8 x 1,25
• Length [mm]: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Fitting Position: Front Axle both sides, Rear Axle both sides
• Quantity Unit: Set
• Quantity: 2
• Quality/ Grade: 8,8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D4-2920A
• Additional information: D42920A
• Lisainfo: D42920A

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: QB 109-1695
• Manufacturer: QUICK BRAKE
• Additional information: QB109-1695
• Lisainfo: QB109-1695

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 945
• Fabrication Number: HCZ-BM-009
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 977
• Fabrication Number: HCZ-BM-011
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,002
• Fabrication Number: HCZ-BM-010
• Manufacturer: NTY

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Version: with elec park brake
• for brake disc diameter [mm]: 345
• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901695

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 1,050
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0298A

• Fitting Position: Front Axle
• Brake System: Brembo
• Length 1 [mm]: 1
• Brake Type: Disc Brake
• Name: DE LZ0219
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo
• Length [mm]: 1,020
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0283A

• Fitting Position: Rear Axle
• Brake System: ATE
• Length 1 [mm]: 1
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0247

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 1,005
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 06.2012
• Brake Type: Disc Brake
• Fitting Position: Rear Axle

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0406
• Quality class: PJ

Additional information: "Tootja: DELPHI
5 TOURING (E61), 06.
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
5 TOURING (E61), 06.
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,047
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Number of connectors: 2
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,047
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 434

• Fitting Position: Front Axle
• Length [mm]: 1,005
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Construction Year from: 06.2012
• Fitting Position: Front Axle Left
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 945
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Fabrication Number: HCA-BM-039
• Manufacturer: NTY

• Construction Year from: 06.2012
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,002
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Length [mm]: 1,020
• Brake Type: Disc Brake
• Manufacturer: BOSCH
• Name: BS 1987474552

• Construction Year from: 06.2012
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 977
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• Brake Type: Disc Brake
• Length [mm]: 1,005
• Number of wear indicators [per axle]: 1
• Name: BR A 00 443
• Manufacturer: BREMBO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,020
• Socket colour: black

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 590
• Socket colour: black

• for brake disc diameter [mm]: 385
• Fitting Position: Front Axle
• Brake System: ATE (Teves)
• Name: FR 901879
• Manufacturer: FRENKIT

• Fitting Position: Front Axle Left
• Material: Aluminium
• for brake disc diameter [mm]: 348
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Material: Aluminium
• for brake disc diameter [mm]: 348
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Inner Diameter [mm]: 348
• Outer Diameter [mm]: 396
• paired article number: 131-07-135
• Colour: silver
• Material: Aluminium
• Article number of recommended accessories: 231-03-115
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 348
• Outer Diameter [mm]: 396
• paired article number: 131-07-136
• Colour: silver
• Material: Aluminium
• Article number of recommended accessories: 231-03-115
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Cable Length [mm]: 920
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year from: 06.2012
• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 985
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,070
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 06.2012
• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 565
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS21025-12B1
• Manufacturer: DELPHI

• Fitting Position: Rear Axle, Rear Axle Left
• Material: Aluminium
• for brake disc diameter [mm]: 320
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 348
• Fabrication Number: HTO-BM-033
• paired article number: HTO-BM-032
• Manufacturer: NTY
• Name: NTY HTO-BM-033

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 348
• Fabrication Number: HTO-BM-032
• paired article number: HTO-BM-033
• Manufacturer: NTY
• Name: NTY HTO-BM-032

• Fitting Position: Rear Axle Left, Rear Axle Right
• for brake disc diameter [mm]: 320
• Weight [kg]: 0.25
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 57SKV518

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Aluminium
• for brake disc diameter [mm]: 320
• Fabrication Number: HTO-BM-034
• Manufacturer: NTY

• Fitting Position: Left, Front Axle
• for brake disc diameter [mm]: 348
• Name: CFD 610330
• Manufacturer: DACO

• Fitting Position: Front Axle Left
• Weight [kg]: 0.27
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle, Left
• for brake disc diameter [mm]: 320
• Name: CFD 610332
• Manufacturer: DACO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter [mm]: 365
• Inner Diameter [mm]: 155

• Fitting Position: Right, Front Axle
• for brake disc diameter [mm]: 348
• Name: CFD 610331
• Manufacturer: DACO

• Fitting Position: Front Axle Right
• Weight [kg]: 0.26
• Warranty: 3 years warranty
• Name: CE 57SKV140
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Aluminium
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 590, 635
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Fitting Position: Front Axle
• Cable Length [mm]: 580
• Required quantity: 2
• Number of pins: 2
• Weight [kg]: 0.038
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 655
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 06.2012
• Fitting Position: Rear Axle
• Cable Length [mm]: 955
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Length [mm]: 1,075
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.054
• Name: SW 20 10 6186
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 1,075
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.054
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 520
• Weight [kg]: 0.039
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Aluminium
• Manufacturer: METZGER

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 520
• Weight [kg]: 0.039
• Name: SW 20 10 6622
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• paired article number: 57760
• Diameter 1/ Diameter 2 [mm]: 170 / 395
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated
• paired article number: 57761
• Diameter 1/ Diameter 2 [mm]: 170 / 395
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Number of pins: 2
• Cable Length [mm]: 660

• Construction Year from: 06.2012
• Fitting Position: Rear Axle
• Number of pins: 2
• Cable Length [mm]: 1,014
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,020
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 590
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Length [mm]: 1,069
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Number of pins: 2
• Sensor Type: Hall Sensor
• Cable Length [mm]: 598
• Manufacturer: FAE

• Fitting Position: Front Axle
• Length [mm]: 653
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 06.2012
• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 565
• MAPP code available:
• Manufacturer: ATE

• Construction Year from: 06.2012
• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 985
• MAPP code available:
• Manufacturer: ATE