• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 10
• Width [mm]: 32
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 4
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Upper, Front, Rear General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, both sides, Upper
• Height [mm]: 51.8
• Weight [kg]: 0.135
• Required quantity: 4
• Inner Diameter [mm]: 10.2
• Outer Diameter [mm]: 39.4
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter 1 [mm]: 53
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 55
• Weight [kg]: 0.22
• Name: DY 37-26724
• Manufacturer: DYS

• Weight [kg]: 0.28
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 15.2
• Outer Diameter [mm]: 56.2
• Length [mm]: 89.3
• Manufacturer: RTS

Fitting Position: Front Axle Right, Lower, Rear, inner, Front Axle Left

• Height [mm]: 55
• Outer Diameter [mm]: 43
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.312
• Material: Rubber/Metal
• Inner Diameter [mm]: 14
• Fitting Position: both sides, Front Axle
• Axle alignment required after fitting:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: COC 49398349
• Manufacturer: CORTECO

• Weight [kg]: 0.14
• Fitting Position: Front Axle both sides, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10.3
• Outer Diameter [mm]: 39.6
• Length [mm]: 51.7
• Manufacturer: RTS

• Thickness [mm]: 44
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 51
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear, Rear Axle Right
• Shape: slotted
• Weight [kg]: 0.12
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 51
• Thickness [mm]: 61
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 50.5
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Weight [kg]: 0.4
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 52
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 4
• Replace in pairs only:
• Manufacturer: MEY

Fitting Position: Upper, Front, Rear, Front Axle Left, Front Axle Right General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime. Name: Puks - K„„ndmik BMW P. F10/11 520D-550 10- /F12/13 640-650 10-/ F01-04 730-760 10-

• Fitting Position: Front Axle, outer, Rear, Lower
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 43
• Thickness 1 [mm]: 55
• Manufacturer: DELPHI ZAWIESZENIE

• Fitting Position: Rear, both sides, Front Axle, Lower, inner
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.29
• Inner Diameter [mm]: 15
• Required quantity: 2
• Outer Diameter [mm]: 56.3
• Manufacturer: TEDGUM

• Fitting Position: Front Axle, Rear, Upper
• Special Purpose Vehicle: not for armoured vehicles
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 52
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Hydro Mount
• Length [mm]: 86
• Material: Aluminium
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Manufacturer: MERTZ

• Fitting Position: Front Axle, Rear, inner
• Inner Diameter 1 [mm]: 15
• Outer Diameter 1 [mm]: 56
• Thickness 1 [mm]: 71
• Manufacturer: DELPHI
• Name: DE TD1114W

• Thickness [mm]: 56
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 56.4
• Material: Rubber/Metal
• Weight [kg]: 0.251
• Name: Puks
• Manufacturer: FEB

Fitting Position: Front Axle Left, Rear, Lower, inner, Front Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Mounting Type: Hydro Mount
• Length [mm]: 68
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Manufacturer: MERTZ
• Lisainfo: M-S5040
• Additional information: M-S5040

• Weight [kg]: 0.118
• Fitting Position: Rear Axle, Lower, both sides
• Outer Diameter [mm]: 50.2
• Inner Diameter [mm]: 14
• Required quantity: 2
• Manufacturer: TEDGUM

• Weight [kg]: 0.31
• Fitting Position: Front Axle both sides, Lower, Rear, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14.3
• Outer Diameter [mm]: 43.4
• Length [mm]: 55
• Manufacturer: RTS

• Fitting Position: Front Axle, Lower, Front, inner, both sides
• Mounting Type: Hydro Mount
• Manufacturer: MERTZ

• Fitting Position: Rear Axle, both sides, Rear, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 44
• Inner Diameter [mm]: 12
• Height [mm]: 29
• Required quantity: 2
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle, Lower, Rear, outer, both sides
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Article number of recommended accessories: 38312 01, 42760 01, 43450 01, 44826 01
• Observe service information:
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Puks - K„„ndmik BMW P. F10/11 520-550 10- LE/PR TYLNA

• Fitting Position: Rear Axle Left, Rear Axle Right, Front, inner
• Height [mm]: 70
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 58
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Quantity per axle: 2
• Replace in pairs only:
• Name: Laagripuks, ootshoob
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.

• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Production date to: 201505
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.383
• Packaging length [cm]: 7
• Packaging width [cm]: 6.7
• Packaging height [cm]: 6.7
• Manufacturer: FEBEST

• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Production date to: 201505
• Fitting Position: Rear Axle Lower, inner
• Weight [kg]: 0.268
• Packaging length [cm]: 7.4
• Packaging width [cm]: 7.4
• Packaging height [cm]: 7.1
• Manufacturer: FEBEST

• paired article number: 173164
• Thickness [mm]: 70
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 65.7
• Material: Rubber/Metal
• Shape: slotted
• Weight [kg]: 0.3
• Name: Puks
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Rear, Lower, Rear Axle Right, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 173170
• Thickness [mm]: 70
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 57
• Material: Rubber/Metal
• Shape: slotted
• Weight [kg]: 0.244
• Name: Puks
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Front, inner, Rear Axle Right, Lower General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides, Rear, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 14
• Height [mm]: 51
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Rear Axle, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 59.3
• Length [mm]: 70
• Manufacturer: LEMFORDER
• Name: LMI 3493001

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, both sides, Rear, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 14
• Height [mm]: 50
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle, Lower, Front
• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 70.2
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear, inner
• Height [mm]: 70
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 66
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Quantity per axle: 2
• Replace in pairs only:
• Name: Laagripuks, ootshoob
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.

• Fitting Position: Rear Axle, both sides, Rear
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 66.6
• Length [mm]: 70
• Name: Puks - K„„ndmik BMW T. F10 5 10-/F01-04 7 08-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Control/Trailing Arm Type: for control arm
• Fitting Position: outer, Rear Axle, both sides, Lower, Rear
• Weight [kg]: 0.552
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 52
• Required quantity: 2
• Manufacturer: TEDGUM

• Control/Trailing Arm Type: for control arm
• Height [mm]: 71
• Outer Diameter [mm]: 56
• Inner Diameter [mm]: 14
• Mounting Type: Rubber-Metal Mount
• Manufacturer: CORTECO ZAWIESZENIE

Fitting Position: Lower, Rear, Centre, Front Axle Right, Front Axle Left

• Fitting Position: Front Axle, both sides, inner, Lower, Rear
• Height [mm]: 89.3
• Weight [kg]: 0.32
• Required quantity: 2
• Inner Diameter [mm]: 15.2
• Outer Diameter [mm]: 56.2
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter 1 [mm]: 53
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: ZTP-BM-008A
• Manufacturer: NTY

• Fitting Position: Front Axle, Lower, inner, both sides
• Mounting Type: Hydro Mount
• Name: Laagripuks, ootshoob
• Manufacturer: MAX
• Lisainfo: MGZ-502050
• Additional information: MGZ-502050

• Fitting Position: Front Axle, Rear, outer, Lower
• Inner Diameter 1 [mm]: 16
• Outer Diameter 1 [mm]: 58
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD1762W

• Weight [kg]: 0.247
• Fitting Position: Front Axle both sides, Lower, Rear, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 56.3
• Length [mm]: 70.9
• Manufacturer: RTS

• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Production date to: 201505
• Fitting Position: Rear Axle Lower, outer
• Weight [kg]: 0.57
• Packaging length [cm]: 7
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: FEBEST

• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Production date to: 201505
• Fitting Position: Centre, inner, Upper
• Weight [kg]: 0.283
• Packaging length [cm]: 7.1
• Packaging width [cm]: 5.6
• Packaging height [cm]: 5.6
• Manufacturer: FEBEST

• Fitting Position: Front Axle, inner, Lower, Front
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 70
• Thickness 1 [mm]: 81
• Manufacturer: DELPHI
• Name: DE TD1734W

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Length [mm]: 86
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Colour Coding: green
• Material: Aluminium
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 0.55
• Name: Puks - K„„ndmik BMW P. GRAN TURISMO F07 09-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 60.3
• Inner Diameter [mm]: 16.1
• Outer Diameter [mm]: 52
• Supplementary Article/Supplementary Info: without holder
• Supplementary Article/Info 2: without retaining ring
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik BMW T. 5 F10/11 10-
• Manufacturer: MEY

• Length [mm]: 68, 81
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Colour Coding: green, white
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 0.53
• Name: Puks - K„„ndmik BMW P. GRAN TURISMO F07 10-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Hydro Mount
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner

• Length [mm]: 60
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 52
• Weight [kg]: 0.555
• Supplementary Article/Info 2: with retaining ring
• Manufacturer: FEBI BILSTEIN

Fitting Position: Rear Axle Left, Lower, outer, Rear Axle Right, Rear General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right, Rear Axle Left, outer
• Height [mm]: 60.3
• Inner Diameter [mm]: 16.1
• Outer Diameter [mm]: 52
• Mounting Type: Molecular Bearing
• Supplementary Article/Supplementary Info: without holder
• Supplementary Article/Info 2: with retaining ring
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks
• Manufacturer: MEY

• Fitting Position: Front Axle, Lower, inner, both sides
• Mounting Type: Hydro Mount
• Article number of recommended accessories: 39639 01, 39640 01
• Observe service information:
• Name: Puks - K„„ndmik BMW P. GRAN TURISMO F07 10-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• for OE number: 31126777729, 31126777730
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 80
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Laagripuks, ootshoob
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70.2
• Length [mm]: 80.8
• paired article number: 271504
• Weight [kg]: 0.52
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner, Lower