• Fitting Position: Cylinder Head
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Fabrication Number: ECT-BM-002
• Manufacturer: NTY

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Manufacturer: SKV GERMANY
• Name: CE 17SKV679

• Colour: black
• Fabrication Number: ECT-BM-001
• Manufacturer: NTY

• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 2
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Housing Colour: black
• Fitting Position: Cylinder Head
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Number of connectors: 2
• Weight [kg]: 0.007
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB
• Additional information: FE171622
• Lisainfo: FE171622

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-003
• Manufacturer: NTY

• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Height [mm]: 28.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N57 D30 A
• Required quantity: 1
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Shape: straight
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2011
• Block Separation:
• Emission Standard: Euro 5
• Construction Year from: 02.2012
• Number of pins: 3
• for OE number: 1362 7 805 152
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 13 62 7 804 742, 89420 WA010
• Number of pins: 3
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Fabrication Number: ECM-BM-000
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11221

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Exhaust System: before turbocharger
• Pressure [Pa] from: 13,600
• Pressure [Pa] to: 400,000
• Manufacturer: NRF

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.03
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 93 6411
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Fitting Position: Intake Manifold
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 3
• Material: Plastic
• Name: SW 20 94 7155
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 13627808013
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: N57 D30 A
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Thread Size: 12 mm
• Manufacturer: VERNET

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 3
• Warranty: 5 years warranty
• Manufacturer: HUCO
• Name: HU 137417

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: FAE

• Engine Code: N57 D30 A
• Required quantity: 1
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Name: SW 33 10 1713
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Engine Code: N57 D30 A
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Number of pins: 3
• Opening pressure [kPa]: 42
• Name: DE DPS00038-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Opening pressure [kPa]: 90
• Manufacturer: DELPHI
• Name: DE DPS00004

• Emission Standard: Euro 5
• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 10.2009
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Weight [kg]: 0.03
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 13 62 7 804 150
• Fabrication Number: EPP-BM-016

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 13 62 8 507 634
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fabrication Number: ECS-BM-005
• Manufacturer: NTY

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Exhaust System: before turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Thread Size: M12x1.25
• Number of pins: 2
• Fabrication Number: EGT-BM-004
• Cable Length [mm]: 375
• Manufacturer: NTY

• Number of connectors: 2
• Number of pins: 3
• Fitting Position: before soot particulate filter
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Pressure [Pa] from: 42,000
• Pressure [Pa] to: 502,000
• Manufacturer: FAE

• Fitting Position: Fuel Rail
• Thread Size: M 18
• Number of pins: 3
• Weight [kg]: 0.07
• Thread Pitch [mm]: 1.5
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV615

• Fabrication Number: EGT-BM-014
• Cable Length [mm]: 300
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Construction Year from: 06.2010
• Number of pins: 3
• Manufacturer: FAE

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Fitting Position: before exhaust turbocharger
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Number of pins: 3, 1
• Connector Shape: oval
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Cable Length [mm]: 105
• Sensor Type: Closed-type Sensor
• Number of pins: 2
• Fabrication Number: EGT-BM-022

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Construction Year from: 10.2011
• Voltage [V]: 12
• Cable Length [mm]: 400
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.07
• Operating Mode: Electric
• Name: CE 30SKV104
• Manufacturer: ESEN SKV

• Fabrication Number: EGT-BM-021
• Number of pins: 2
• Cable Length [mm]: 600
• Sensor Type: Closed-type Sensor
• Fitting Position: before catalytic converter

• Engine Code: N57 D30 A
• not for emission standard: Euro 5
• for facelift:
• Block Separation:
• Trim Level: Blue Performance
• not for facelift:
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Fitting Position: before soot particulate filter
• Number of pins: 2
• Cable Length [mm]: 400
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

Manufacturer: MAGNETI MARELLI

• Fitting Position: Exhaust Manifold
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

• Fitting Position: after soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Number of pins: 2
• Warranty: 3 years warranty
• Version: AM
• Weight [kg]: 0.08
• Name: CE 30SKV437
• Manufacturer: ESEN SKV

• Exhaust System: before soot particulate filter
• Line insulation design: with silicone-coated woven-fibre insulation
• for OE number: 13 62 7 806 254
• Temperature range from [°C]: -40
• Temperature range to [°C]: 1,000
• Sensor Type: NTC Sensor
• Socket colour: black
• Weight [kg]: 0.1
• Thread Size: M12 X 1,25
• Overall Length [mm]: 485
• Shape: straight
• Tightening Torque [Nm]: 45
• Cable Length [mm]: 370
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 395
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 35
• Connecting thread: M12x1,25
• Alternative Repair Kit: 551148
• Manufacturer: ERA

• Fitting Position: Particulate Filter
• for OE number: 13627806254, 7806254
• Required quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Quality: OE
• Thread Size: M12x1.25
• Temperature range [°C]: -40, 800
• Cable Length [mm]: 400
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 38
• Gross Weight [g]: 66
• Name: Andur, heitgaasitemperatuur
• Manufacturer: DEN

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 385
• Manufacturer: DELPHI
• Name: DE ES21067-12B1

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N57 D30 A
• for facelift:
• Lambda Sensor: Diagnostic Probe, Heated
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN