• Material: Stainless Steel
• Connecting thread: M22x1,5
• Thread Type: Internal Thread
• Outer Diameter [mm]: 31
• Height [mm]: 11
• Name: FI 998816
• Manufacturer: FA1

• Number of pins: 3
• Colour: black
• Connector Shape: oval
• Fabrication Number: ECS-BM-006
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV877
• Manufacturer: ESEN SKV

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 114D, 320I, X3 XDRIVE 20D 09-

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Connector Shape: oval
• Number of pins: 3
• Fitting Position: Exhaust Manifold
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECS-BM-004
• Manufacturer: NTY

• Engine Code: B47 D20 A
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur,ohuvotu rohk
• Manufacturer: EPS

• Exhaust System: before soot particulate filter
• for OE number: 13628570686
• Manufacturer: NRF

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• for OE number: 13 62 8 589 104
• Cable Length [mm]: 415
• Number of pins: 4
• Connector Shape: oval
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-BM-012
• Manufacturer: NTY

Fitting Position: before catalytic converter, after catalytic converter Lisainfo: ENG. 1,5D,2.0D BMW 1 (F20,F21) 15-19, 2 (F22,F8),F23) 15-, 3 (F30,F80,F31,F34) 11-18, 4 (F32,F82,F33,F83,F36) 13-, 5 (F10,F11) 10-17/ SONDA DIAGNOSTYCZNA, ZA KATALIZATOREM, Dœ.KABLI 415MM Additional information: ENG. 1,5D,2.0D BMW 1 (F20,F21) 15-19, 2 (F22,F8),F23) 15-, 3 (F30,F80,F31,F34) 11-18, 4 (F32,F82,F33,F83,F36) 13-, 5 (F10,F11) 10-17/ SONDA DIAGNOSTYCZNA, ZA KATALIZATOREM, Dœ.KABLI 415MM

• Engine Code: B47 D20 A
• Exhaust System: before turbocharger
• Thread Size: M14x1,5
• Spanner Size: 27
• Manufacturer: FACET

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Diagnostic Probe, Broadband oxygen sensor, Heated
• Emission Standard: Euro 6
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 1,020
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-BM-021
• Manufacturer: NTY

• Cable Length [mm]: 460
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV449

• for OE number: 13 62 8 570 234
• Overall Length [mm]: 450
• Number of pins: 2
• Fabrication Number: EGT-BM-013
• Cable Length [mm]: 310
• Manufacturer: NTY

• Cable Length [mm]: 590
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV448

• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 305
• Overall Length [mm]: 455
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 310
• Overall Length [mm]: 435
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Fabrication Number: EGT-BM-023
• Cable Length [mm]: 597
• Number of pins: 2
• Sensor Type: NTC Sensor
• for OE number: 13628507629
• Manufacturer: NTY

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fitting Position: Particulate Filter
• Required quantity: 1
• Thread Size: M12x1.25
• Cable Length [mm]: 332
• Number of pins: 2
• for OE number: 13628570234
• Quality: OE
• Sensor Type: NTC Sensor
• Weight [g]: 35
• Gross Weight [g]: 63
• Manufacturer: DENSO
• Name: DN DET-0151

• Fitting Position: before soot particulate filter
• Exhaust System: for soot particulate filter
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Sensor Type: NTC Sensor
• Cable Length [mm]: 312
• Overall Length [mm]: 436
• Thread Size: M 12
• Thread Pitch [mm]: 1.25
• Spanner Size: 14
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: before SCR catalytic converter
• not for emission standard: Euro 3, Euro 5
• not for special equipment code: 0161, 0169
• Thread Size: M12x1.25
• Cable Length [mm]: 300
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• for OE number: 13 62 8 589 814
• Overall Length [mm]: 430
• Number of pins: 2
• Fabrication Number: EGT-BM-011
• Cable Length [mm]: 310
• Manufacturer: NTY

• Construction Year from: 03.2019
• Transmission Type: not for automatic transmission
• Fitting Position: EGR valve at manifold
• Cable Length [mm]: 435
• Overall Length [mm]: 526
• Manufacturer: METZGER

• Exhaust System: before soot particulate filter
• Cable Length [mm]: 310
• Number of pins: 2
• Name: DE TS30368-12B1
• Manufacturer: DELPHI

• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV327

• Required quantity: 1
• Fitting Position: after EGR cooler
• Overall Length [mm]: 465
• Cable Length 1 [mm]: 375
• Spanner Size: 14
• Thread Size: M10x1,25
• Fitting Depth [mm]: 16
• Number of pins: 2
• Socket colour: black
• Form 1: straight
• Sensor Type: PTC
• Voltage [V]: 5
• Temperature range from [°C]: -40
• Temperature range to [°C]: 999
• Manufacturer: BREMI

Transmission Type: 6-Speed Manual Transmission, 8-Speed Automatic Transmission

• Fitting Position: after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Number of circuits: 4
• Number of pins: 4
• Length [mm]: 545
• for OE number: 8589104-01
• Manufacturer: METZGER

• Exhaust System: before catalytic converter
• Cable Length [mm]: 313
• Number of pins: 2
• Manufacturer: DLP

Name: CZUJNIK TEMP. SPALIN BMW BMW 114D, 218D, 316D, X5 XDRIVE 25D 10-

• Fitting Position: before soot particulate filter
• Overall Length [mm]: 438
• Cable Length [mm]: 315
• Fitting Depth [mm]: 39
• Connector Shape: D Shape
• Connecting thread: M12x1.25-6e
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Fitting Position: after soot particulate filter
• Overall Length [mm]: 453
• Cable Length [mm]: 310
• Fitting Depth [mm]: 59
• Connector Shape: D Shape
• Connecting thread: M12x1.25-6e
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Construction Year to: 05.2019
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• not for special equipment code: S1DEA
• Overall Length [mm]: 540
• Name: Lambda andur
• Manufacturer: BOS

• Construction Year to: 05.2019
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for special equipment code: S1DEA
• Overall Length [mm]: 1,020
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 05.2019
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 370
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 05.2019
• Manufacturer: BOSCH

• Number of pins: 5
• Connector Shape: oval
• Cable Length [mm]: 830
• Oxygen Sensor: Diagnostic Probe
• for OE number: 13628573155
• Manufacturer: MEAT&DORIA

• Fitting Position: after SCR catalytic converter
• not for emission standard: Euro 3, Euro 5
• Name: DRM 02338
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Fitting Position: before SCR catalytic converter
• not for emission standard: Euro 3, Euro 5
• Name: DRM 02318
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Cable Length [mm]: 915
• Number of pins: 5
• Fabrication Number: ENOX-BM-004
• Manufacturer: NTY

• Fabrication Number: ENOX-BM-003
• Cable Length [mm]: 415
• Manufacturer: NTY

• Shape: Square
• Number of mounting bores: 2
• Cable Length [mm]: 550
• Connector Shape: oval
• Number of pins: 5
• Socket colour: black
• for OE number: 13 62 8 589 846
• Name: CZUJNIK NOX BMW 1 F20 2.0 15-
• Manufacturer: MAX

• Voltage [V]: 12
• Fitting Position: after catalytic converter
• Cable Length [mm]: 890
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.33
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• for OE number: 13628589844
• Cable Length [mm]: 390
• Number of pins: 5
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• for OE number: 858984601
• Fitting Position: after catalytic converter
• Cable Length [mm]: 890
• Number of pins: 5
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Fitting Position: after catalytic converter
• Cable Length [mm]: 890
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.33
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Fitting Position: after SCR catalytic converter
• Cable Length [mm]: 1,010
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.28
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 02.2018
• Fitting Position: before catalytic converter
• Engine Code: B47 D20 A
• Cable Length [mm]: 890
• Number of pins: 5
• Thread Size: M20
• Connector Shape: oval
• Name: DE ANS1011-12B1
• Manufacturer: DELPHI

• Construction Year from: 03.2018
• Fitting Position: after catalytic converter
• Cable Length [mm]: 610
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Name: DE ANS1069-12B1
• Manufacturer: DELPHI

• Construction Year to: 02.2018
• Fitting Position: after catalytic converter
• Cable Length [mm]: 390
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Name: DE ANS1036-12B1
• Manufacturer: DELPHI

• Construction Year from: 03.2018
• Construction Year to: 05.2019
• Fitting Position: after catalytic converter
• Name: NOx-sensor, karbamiidipritse
• Manufacturer: BOS

• Construction Year from: 03.2018
• Construction Year to: 05.2019
• Fitting Position: before catalytic converter
• Name: NOx-sensor, karbamiidipritse
• Manufacturer: BOS

• Fitting Position: after SCR catalytic converter
• Construction Year from: 03.2018
• not for emission standard: Euro 3, Euro 5
• not for special equipment code: S169A, S161A
• Length [mm]: 600
• Number of connectors: 5
• Manufacturer: METZGER

• for type code: 1S71, 1S72
• Construction Year to: 03.2018
• not for special equipment code: S169A, S161A
• not for manufacturer exhaust gas norm: EURO 3, EURO 5
• Fitting Position: after SCR catalytic converter
• Length [mm]: 415
• for OE number: 13628589844
• not for OE number: 13627812528
• Manufacturer: METZGER

• Fitting Position: before SCR catalytic converter
• Construction Year from: 03.2018
• not for emission standard: Euro 3, Euro 5
• not for special equipment code: S169A, S161A
• Length [mm]: 1,040
• Number of connectors: 5
• Manufacturer: METZGER

• Guarantee: 3 years guarantee
• for OE number: 13 62 7 812 530
• Voltage [V]: 12
• Supplementary Article/Info 2: with cable
• Oxygen Sensor: Thread pre-greased
• Supplementary Article/Supplementary Info: with control unit
• Width [mm]: 110
• Height [mm]: 80
• Length [mm]: 230
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M20x1,5
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: before SCR catalytic converter
• Construction Year to: 03.2018
• not for emission standard: Euro 3, Euro 5
• Length [mm]: 915
• Number of connectors: 5
• Manufacturer: METZGER

• Fitting Position: after SCR catalytic converter
• Construction Year to: 03.2018
• for type code: 1S71, 1S72
• not for emission standard: Euro 3, Euro 5
• not for special equipment code: S169A, S161A
• Length [mm]: 415
• for OE number: 13628518789
• not for OE number: 13628576469, 13628589844
• Manufacturer: METZGER

• Cable Length [mm]: 915
• Number of pins: 5
• Product must be determined on the vehicle or the motor:
• for manufacturer number: 5WK9-6699B
• Observe service information:
• Observe the vehicle manufacturer specifications:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Exhaust System: before turbocharger