Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Cooling Type: Water-
cooled - Core Depth [mm]: 46
- Core Length [mm]: 176
- Core Width [mm]: 115
- Material: Aluminium
- Number of ribs: 12
-
Supplementary Article/Supplementary Info: without oil filter housing,
with gaskets/ seals -
Technical Information: FIRST FIT -
Includes gaskets and bolts when needed - Manufacturer: NISSENS
-
Lisainfo: BMW 3 E90-
E91- E92- E93 (05- ) 320d -
Additional information: BMW 3 E90-
E91- E92- E93 (05- ) 320d
-
Transmission Code: 8HP50Z,
8HP70Z, 8HP90Z, 8HP45Z -
Transmission Type: 8-
Speed Automatic Transmission - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Supplementary Article/Info 2: without bolts/
screws -
Supplementary Article/Supplementary Info: with gaskets/
seals, without accessories -
Transmission Code: 8HP45Z,
8HP70Z, 8HP90Z, 8HP50Z, 8HP75Z -
Transmission Type: 8-
Speed Automatic Transmission - Weight [kg]: 0.042
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Name: Oil cooler
- Quality class: PJ
Lisainfo: 1 F20/21, 11- (kvaliteediklass PJ)
-
Cooling Type: Water-
cooled - Material: Aluminium
-
Filter type: for conversion kit,
filter cartridge -
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
-
Transmission Code: 8HP45Z,
8HP70Z -
for article number: V20-
0582, V20- 0588 - Supplementary Article/Supplementary Info: with seal
- See accessories list for additionally required parts:
-
Transmission Type: 8-
Speed Automatic Transmission - Weight [kg]: 0.674
- Manufacturer: VAICO
- Quality class: PJ
- Name: Automatic transmission filter
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Depth [mm]: 43
- Core Width [mm]: 71
- Core Length [mm]: 141
-
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: NRF
- Filter type: Screen Filter
- Length [mm]: 486
- Width [mm]: 285
- Height [mm]: 53.5
-
Supplementary Article/Supplementary Info: with seal,
with oil drain plug - Weight [kg]: 1.675
-
Supplementary Article/Info 2: with bolts/
screws, with filter - Transmission Type: for automatic transmission
- Name: SW 33 10 0984
- Manufacturer: SWAG
- Lisainfo: 33 10 0984 SWA
- Additional information: 33 10 0984 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Aluminium
-
Cooling Type: Water-
cooled - Weight [kg]: 1.3
- Packaging length [cm]: 29
- Packaging width [cm]: 17
- Packaging height [cm]: 13
- for OE number: 17218514515
- Construction Year from: 03.2015
-
Transmission Type: 8-
Speed Automatic Transmission -
Cooling Type: Water-
cooled - Core Depth [mm]: 125
- Core Length [mm]: 250
- Core Width [mm]: 160
- Material: Aluminium
- Number of ribs: 13
-
Supplementary Article/Supplementary Info: without oil filter housing,
with gaskets/ seals - Manufacturer: NISSENS
-
Transmission Code: ZF 8HP45/
50Z - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with seal,
with oil drain plug - Length [mm]: 486
- Width [mm]: 285
- Height [mm]: 50
- Outer Diameter [mm]: 32
- SVHC: No SVHC present!
-
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAN
-
Supplementary Article/Supplementary Info: with oil filter housing,
with gaskets/ seals -
Fabrication Number: CCL-
BM- 029 - Manufacturer: NTY
-
Name: NTY CCL-
BM- 029
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Code: 8HP70/
H/ X/ HIS/ XHIS, ZF 8HP - Manufacturer: ZF
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks