• Sensor Type: Hall Sensor
• Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Fitting Position: Exhaust Side
• Fabrication Number: ECP-HY-001
• Manufacturer: NTY

• Thread Size: 3/8x18 NPTF
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: D4FB
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: D4FB
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: EP 1.830.367
• Manufacturer: EPS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 3
• Manufacturer: JPN

• Required quantity: 1
• Manufacturer: BREMI

• Quantity: 1
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11215

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 13
• Manufacturer: DELPHI ELEKTRONIKA

• Fabrication Number: ECS-HY-002
• Manufacturer: NTY

• Number of pins: 3
• Pressure from [kPA]: 34
• Name: DE PS20136-12B1
• Manufacturer: DELPHI

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: D4FB
• Required quantity: 1
• Manufacturer: FACET

• Engine Code: D4FB
• Required quantity: 1
• Name: EP 1.953.556
• Manufacturer: EPS

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Vehicle Equipment: for vehicles with diesel soot filter
• Connector Shape: oval
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Exhaust System: before soot particulate filter
• Manufacturer: NRF

• Engine Code: D4FB
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Engine Code: D4FB
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: EP 1.993.342
• Manufacturer: EPS

• Length [mm]: 52
• Number of pins: 3
• Guarantee: 3 years guarantee
• Height [mm]: 23.3
• Weight [kg]: 0.05
• Pressure [bar]: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: D4FB
• Required quantity: 1
• Pressure from [kPA]: 18
• Pressure to [kPA]: 300
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.345
• Manufacturer: EPS

• Number of pins: 5
• Housing material: Plastic
• Manufacturer: KAMOKA

• Number of pins: 5
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Construction Year from: 05.2017
• Construction Year to: 01.2021
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Fitting Position: after catalytic converter
• Cable Length [mm]: 650
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Diagnostic Probe, Broadband oxygen sensor, Heated
• Emission Standard: Euro 5, Euro 6
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 650
• Manufacturer: DELPHI

• for OE number: 6000611746
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Manufacturer: METZGER

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Construction Year to: 12.2018
• Cable Length [mm]: 700
• Manufacturer: FAE ELEKTRYKA

• Conductor Number: 5
• Length [mm]: 450
• Number of circuits: 5
• Cable Length [mm]: 450
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM177

• Oxygen Sensor: Regulating Probe
• Fabrication Number: ESL-HY-505
• Cable Length [mm]: 400
• Manufacturer: NTY

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV411

• Engine Code: D4FB
• Construction Year from: 07.2017
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: D4FB
• Construction Year from: 07.2017
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.394
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Number of pins: 3
• Supplementary Article/Info 2: Low Pressure Side
• for OE number: 314353T000
• Fitting Position: Supply Pump
• Manufacturer: METZGER

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year to: 12.2018
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 39350 2A640
• Number of circuits: 5
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Engine Code: D4FB
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Manufacturer: FACET

• Quantity: 1
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Additional information: DE AF10395-12B1
• Lisainfo: DE AF10395-12B1

• Engine Code: D4FB
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.372
• Manufacturer: EPS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI
• Additional information: BRE30327
• Lisainfo: BRE30327

• Construction Year to: 06.2017
• Fitting Position: before catalytic converter
• Required quantity: 1
• Oxygen Sensor: Regulating Probe
• Cable Length [mm]: 292
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358103141

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2018
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 39350 2A620
• Number of circuits: 5
• Overall Length [mm]: 450
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009149191

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Fitting Position: after catalytic converter
• Cable Length [mm]: 180
• Manufacturer: METZGER

• Construction Year to: 12.2018
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Manufacturer: BOSCH SYSTEMY WTRYSKU DIESEL

• Engine Code: D4FB
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Housing Type: with housing
• Number of pins: 5
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Manufacturer: ERA

• Fitting Position: before catalytic converter
• Emission Standard: Euro 6c
• Number of pins: 5
• Socket colour: grey
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with control unit
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 12.2018
• Manufacturer: BOSCH

• Fitting Position: before catalytic converter
• Emission Standard: Euro 6c
• Number of pins: 5
• Connector Shape: oval
• Socket colour: black
• Number of mounting bores: 2
• Manufacturer: METZGER

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring