• Engine Code: G4BB
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Pressure [bar]: 0.3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Engine Code: G4BB
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Pressure [bar]: 0.3
• Housing Colour: black
• Thread Size: 1/8
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Pressure [bar]: 0.3
• Thread Size: 1/8 GAS
• Spanner Size: 27
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Thread Size: 3/8x18 NPT
• Manufacturer: VERNET

• Alternatively:
• Pressure [bar]: 2.5
• Housing Colour: black
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 3
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: 3922038020
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Mounting Type: Bolted
• Voltage [V]: 12
• Pressure [bar]: 0.4
• Combi Switch Function: Normally Closed Contact
• Thread Size: 1/8 GAS
• Colour: red
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6ZF007392001

• Fabrication Number: ECP-KA-003
• Manufacturer: NTY

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: 3/8" x 18 NPTF
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Fabrication Number: ESS-HY-507
• Manufacturer: NTY

• Cable Length [mm]: 225
• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550396
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 35170 22600, 5826473, 9181538, 22620 1F700
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Housing Colour: black
• Number of pins: 3
• Thread Size: R3/8
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• for OE number: 39350 23500
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: G4BB
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Material: Plastic
• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 2
• Alternative Repair Kit: 550301
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 2
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11308

• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: G4GM
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.07
• Manufacturer: VALEO
• Name: VA 254068

• Required quantity: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Mounting Type: mounting
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309621
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Name: DE SS11028
• Manufacturer: DELPHI

• Length [mm]: 375
• Fabrication Number: ESL-HY-504
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

Manufacturer: METZGER

• Construction Year from: 02.2003, 03.2003
• Block Separation:
• Cable Length [mm]: 190
• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Length [mm]: 220
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-HY-506
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Mounting Type: Bolted
• Number of pins: 3
• Sensor Type: Hall Sensor
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: with gaskets/seals
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358191061
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Weight [kg]: 0.06
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: G4GB
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Construction Year from: 06.2003
• Engine Code: G4GM
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Engine Code: G4BB
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI

• Cable Length [mm]: 225
• Number of pins: 2
• Manufacturer: ERA

• for model code: Elantra, Lantra
• Block Separation:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Engine Code: G4GB
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Engine Code: G4GB
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 377
• Name: Lambda andur
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: G4BB, G4GB
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Length [mm]: 520
• Name: Lambda andur
• Manufacturer: MAX

• Exhaust System: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 375
• Number of connectors: 4
• Manufacturer: VERNET

• Engine Code: G4BB
• Construction Year to: 02.2003
• Length [mm]: 255
• Supplementary Article/Info 2: without fastening clamp
• Name: EP 1.957.090
• Manufacturer: EPS

• Fitting Position: before centre muffler
• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 280
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570021
• Manufacturer: ERA

• Engine Code: G4BB
• Lambda Sensor: Diagnostic Probe, Planar probe
• Number of pins: 4
• Cable Length [mm]: 300
• Manufacturer: MEAT&DORIA

• Construction Year to: 07.2003
• Lambda Sensor: Heated
• Voltage [V]: 12
• Length [mm]: 385
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV563
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 375
• Number of circuits: 4
• Cable Length [mm]: 375
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 3
• Guarantee: 5 years guarantee
• Manufacturer: HITACHI

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Construction Year from: 07.2003
• Cable Length [mm]: 220
• Manufacturer: DELPHI
• Name: DE ES20170-12B1

• Engine Code: G4GM
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: G4GB
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: G4GB
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 377
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: after catalytic converter
• Cable Length [mm]: 384
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20158-12B1

• Lambda Sensor: Heated
• Length [mm]: 420
• Number of pins: 4
• Technical Information Number: Universal 77005
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Vehicle type: Elantra
• Cable Length [mm]: 420
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066271
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 3921022610
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 375
• Number of pins: 4
• Weight [g]: 133
• Gross Weight [g]: 166
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Engine Code: G4GM
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Name: VA 368030
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• for OE number: 3921023500
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 220
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 123
• Manufacturer: DENSO
• Name: DN DOX-2060
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 375
• Number of circuits: 4
• Manufacturer: VDO

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle type: Elantra
• Cable Length [mm]: 175
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: G4BB
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 130
• for article number: 81617E
• Quality: OE EQUIVALENT
• Name: Lambda andur
• Manufacturer: MD

• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 300
• Name: LAMBDA ANDUR
• Manufacturer: PIE