Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 05.2000
- Block Separation:
- Quantity per packing unit: 25
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Copper
- Shape: C Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
036.400, 505.550, 505.540 - Manufacturer: ELRING
- Lisainfo: 813.036 ELR
- Additional information: 813.036 ELR
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- Quantity per packing unit: 100
- Jämedus/Tugevus (mm): 2
-
Kaal (kg): 0,
003 - Materjal: Vask
- Siseläbimõõt [mm]: 10
- Välisläbimõõt [mm]: 21
- Kaal (g): 3
- Manufacturer: METALCAUCHO
- Construction Year to: 05.2000
- Block Separation:
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
- Quantity per packing unit: 25
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2.1
- Material: Copper
- Shape: A Shape
- Alternative Repair Kit: 505.540
- Manufacturer: ELRING
- Lisainfo: 108.502 ELR
- Additional information: 108.502 ELR
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 20
- Material: Copper
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 05.2000
- Block Separation:
-
Thread Size: M14x1,
25 - Length [mm]: 13
- Additionally required articles (article numbers): 253.550.100
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- Construction Year to: 05.2000
- Block Separation:
- Thread Size: M14x1.25
- Length [mm]: 13
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- Vehicle Equipment: for vehicles without air conditioning
- Construction Year from: 05.2000
-
Keermemõõt: M10x1,
25x13 - Võtmekaugus: 21 mm
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: Sulgurkruvi,
olivann - Manufacturer: DRM
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Additionally required articles (article numbers): 746.520.100
- Manufacturer: FA1 FISCHER
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Quantity per packing unit: 5
-
Surface: Zinc-
coated - Fitting Position: engine sided
-
External Thread [mm]: M10 x 1,
25 - Bolt Head-/Nut Design: Male Hex
- Thread Length [mm]: 13
- Weight [kg]: 0.2
- Required quantity: 1
-
Thread Size: M10 x 1,
25 - Spanner Size: 21
- Supplementary Article/Info 2: with seal ring
- Thread Pitch [mm]: 1.25
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Alternative Repair Kit: 877.930
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Length [mm]: 16
- Outer Diameter [mm]: 21
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 10.2
- Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 16
- Outer Diameter [mm]: 21
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 10.2
- Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 18
-
Thread Size: M 10 x 1,
25 x 12, 5 - Spanner Size: 21
- Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: COT
- Construction Year to: 05.2000
- Block Separation:
-
Thread Size: M14x1,
25x13 - Bolt Head-/Nut Design: Hexagon Socket
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- Pikkus (mm): 13
- Keermemõõt: M14x1.25
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: FAST
- Length [mm]: 16
- Outer Diameter [mm]: 21
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 10.2
- Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: without seal ring
- Name: SW 62 94 5617
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 05.2000
- Block Separation:
- Quantity per packing unit: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
- Alternatively:
- Name: Rongastihend
- Manufacturer: FIS
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
- Quantity per packing unit: 10
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
- Name: Rongastihend
- Manufacturer: FIS
- Construction Year from: 05.2000
- Quantity per packing unit: 10
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
-
Materjal: ACM
( (Polyacryl- Kautschuk) - Jämedus/Tugevus (mm): 64
- Manufacturer: FAST
- Construction Year to: 05.2000
- Block Separation:
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
- Name: Rongastihend
- Manufacturer: FIS
Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning
- Construction Year from: 05.2000
- Vehicle Equipment: for vehicles without air conditioning
- Quantity per packing unit: 100
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Manufacturer: FA1 FISCHER
- Construction Year from: 05.2000
- Quantity per packing unit: 100
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Manufacturer: FIS
Name: PODKADKA,USZCZELKA MIEDZIANA CU 10,00 X 21,00 X 2,00 (OPAKOWANIE 100 SZT.)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks