Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 2
- Socket colour: light blue
- Connector Shape: rectangular
-
Thread Size: M 12x1,
5 - Sensor Type: NTC Sensor
- Spanner Size: 19 mm
- for OE number: 60800167
- Manufacturer: MEAT & DORIA
- OE-numbri jaoks: 13 62 1 709 967
- Laius (mm): 45
- Kõrgus (mm): 40
- Pikkus (mm): 75
- Kaal (g): 25
- Garantii: 3 aastat garantii
- Pistikkontaktide arv: 2
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- OE-numbri jaoks: 60 813 687
- Laius (mm): 33
- Kõrgus (mm): 30
- Pikkus (mm): 58
- Kaal (g): 54
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Engine Code: 834 G.000
- Number of pins: 2
- Height [mm]: 51.8
- Weight [kg]: 0.029
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M12x1,
5 - Housing Colour: blue
- Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M12x1,
5 - Housing Colour: blue
- Manufacturer: FAE ELEKTRYKA
- Tightening torque to [Nm]: 22
- Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Colour Coding: blue
- Manufacturer: MAGNETI MARELLI
- Name: MM SPA104
- Engine Code: 834 G.000
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.113,
1.880.114, 1.880.149, 1.880.151 - Name: EP 1.830.128
- Manufacturer: EPS
- Engine Code: 834 G.000
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 7.8113,
7.8114, 7.8149, 7.8151 - Manufacturer: FACET
- Number of pins: 3
- Operating Mode: Mechanical
- Manufacturer: DELPHI
-
Name: DE SS10992-
12B1
- Engine Code: 834 G.000
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 302 -
Supplementary Article/Supplementary Info: with gasket/
seal - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: M12x1,
5 - Colour: blue
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Corresponds to the original part in colour: blue
- Manufacturer Restriction: Bosch
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107361
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Alternatively:
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Supplementary Article/Info 2: without cable
- Connector Shape: rectangular
- Weight [kg]: 0.024
- Alternative Repair Kit: 550144
- Manufacturer: ERA
- Number of pins: 3
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Manufacturer: BOSCH
- Name: BS 0280130026
- Weight [kg]: 0.046
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Connector/Clamp: Connector may need adjustment
- Number of circuits: 4
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
UV- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: JAPKO
- Supplementary Article/Info 2: with cable
- Cable Length [mm]: 580
- Overall Length [mm]: 690
- Number of pins: 2
- Connector Shape: oval
- Socket colour: brown
-
Thread Size: M14 x 1,
5 - Spanner Size: 17
- Sensor Type: PTC
- Weight [kg]: 0.08
- Manufacturer: VALEO
- Construction Year to: 02.1995
- Vehicle Identification Number (VIN) to: 14972
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 100
- Gross Weight [g]: 149
- Manufacturer: DENSO
-
Name: DN DOX-
0120 - Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"
- Supplementary Article/Info 2: with cable
- Cable Length [mm]: 450
- Overall Length [mm]: 525
- Number of pins: 2
- Connector Shape: oval
- Socket colour: brown
-
Thread Size: M14 x 1,
5 - Spanner Size: 17
- Sensor Type: PTC
- Weight [kg]: 0.08
- Manufacturer: VALEO
- Oxygen Sensor: Regulating Probe
- Number of pins: 4
-
Cable Length [mm]: 1,
000 - for article number: 81027
- for OE number: 60808350
- Manufacturer: MEAT&DORIA
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- RICAMBI no. up to: 14972
- Block Separation:
- RICAMBI Number from: 149973
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986506
-
Oxygen Sensor: Regulating Probe,
Finger probe, Heated - Cable Length [mm]: 317
- Manufacturer: DELPHI
- Engine Code: 834 G.000
- Oxygen Sensor: Regulating Probe
-
Length [mm]: 1,
240 - Number of pins: 4
- Technical Information Number: Universal 77008
- Manufacturer: FAE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks