Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: 159 A3.046
-
Spark Plug: 1 -
Earthed Electrode, with resistor - Electrode Gap [mm]: 0.9
- Thread Size: M14 x 1.25
- Thread Length [mm]: 19
-
Spanner Size: 20,
8 -
Technical Information: Nichel-
Chromium with internal in branch - Manufacturer: MAGNETI MARELLI
- for OE number: 59622A
- Spanner Size: 20
-
Spark Plug: Nickel Middle Electrode,
1 - Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: KAMOKA
-
for OE number: 09482-
00299 - Spanner Size: 20
-
Spark Plug: Nickel Middle Electrode,
1 - Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: KAMOKA
- Engine Code: 159 A3.046
- Required quantity: 4
- Quantity per packing unit: 10
- for OE number: 5894588
- Connector type: Removable SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- alternative item: IQ22
- Name: DN Q22PRU
- Manufacturer: DENSO
- Engine Code: 159 A3.046
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.7
- Diameter [mm]: 21
- Length [mm]: 73.5
- Weight [kg]: 0.052
-
Thread Size: M14 x 1,
25 -
Spark Plug: 1 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 0.8
- Thread Size: M14 x 1.25
- Spanner Size: 21
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188704021
- Manufacturer: HELLA
- Electrode Gap [mm]: 0.8
- Quantity per packing unit: 4
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
-
Additional information: V-
LINE 2 -
Lisainfo: V-
LINE 2
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- electrode gap to be set [mm]: 0.9
- Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
- Electrode Gap [mm]: 0.8
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Electrode Gap [mm]: 0.8
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Required quantity: 4
- Quantity per packing unit: 10
- Electrode Gap [mm]: 1
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 21 mm
- Quality/ Grade: Nickel GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: RN7YC
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.65
- Packaging width [cm]: 2.45
- Packaging height [cm]: 2.45
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1.6
-
Name: CH OE018/
T10 - Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Required quantity: 4
- electrode gap to be set [mm]: 0.9
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.8
-
Connector type: M4/
SAE -
Thread Size: M14x1,
25 - Spanner Size: 21 mm
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 R-
6 DU - Self-service suited packaging see parts list:
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Name: STEKNAL
- Manufacturer: BERU
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 21 mm
-
Quality/ Grade: Ti Poly-
V - Packing Type: Box
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Technical Information Number: CET8
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CET8
- Manufacturer: CHAMPION
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE -
Thread Size: M14x1,
25 - Spanner Size: 21 mm
-
Quality/ Grade: Poly-
V Tit -
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Name: STEKNAL
- Manufacturer: BERU
- Electrode Gap [mm]: 0.8
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 4
- Electrode Gap [mm]: 0.8
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 21 mm
- Quality/ Grade: Pt GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: RN8WYPB3
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2.5
- Packaging height [cm]: 2.5
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CCH9804
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Electrode Gap [mm]: 0.8
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Name: STEKNAL
- Manufacturer: NGK
- Lisainfo: LPG2
- Additional information: LPG2
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks