Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Base body material: Aluminium
-
Sealing lip material: CR
(chloroprene rubber) - Inner Diameter [mm]: 18.5
- Outer Diameter [mm]: 26
- Thickness [mm]: 1.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 50
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 26
- Thickness [mm]: 1.5
- Gasket Design: Metal Elastomer Gasket
-
Material: FPM
(fluoride rubber) - Shape: A Shape
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: ELR
- Quantity per packing unit: 25
-
Material: Rubber/
Metal - Inner Diameter [mm]: 18.5
- Thickness [mm]: 2.5
- Outer Diameter [mm]: 26
- Weight [kg]: 0.007
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 25
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 26
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: ELR
- Outer Diameter [mm]: 26
- Inner Diameter [mm]: 18
- Thickness [mm]: 1.5
- Material: Copper
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Keermemõõt: M18X1,
5 -
Seerianumber: BKM-
FT- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity per packing unit: 10
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Thread Length [mm]: 27
- Bolt Head-/Nut Design: Hexagon Socket
-
Supplementary Article/Supplementary Info: without gasket/
seal -
Surface: Zinc-
coated - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Keermemõõt: M18x1,
5x22 - Võtmekaugus: 8 mm
- Kruvipea-/Mutriprofiil: sisekuuskant
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 01370
-
Thread Size: M18x1,
5 - Length [mm]: 27
- Additionally required articles (article numbers): 122.520.100
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 8 mm
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
-
Thread Size: M18x1,
5 - Length [mm]: 27
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 8 mm
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M 18 x 1,
50 x 22 - Length [mm]: 30.5
- Packing Type: Blister Pack
- Spanner Size: 8
- Manufacturer: CORTECO
- Name: COU 220126S
- Materjal: Metall
-
Keermemõõt: M22x1,
5 - Pikkus (mm): 13
- Kruvipea-/Mutriprofiil: sisekuuskant
- Võtmekaugus: 12
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Konteineri tüüp: Kott
- Manufacturer: METZGER
-
Thread Size: M22 x 1,
5 x 13 - Length [mm]: 13
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Name: COU 220127S
-
Keermemõõt: M18 x 1,
5 - Kruvipikkus kruvipea all [mm]: 27
- Kruvipea-/Mutriprofiil: sisekuuskant
- Võtmekaugus: 8
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pikkus (mm): 31
- Võtmekaugus: 8
- Kruvipea-/Mutriprofiil: sisekuuskant
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: FAST
-
Thread Size: M18x1,
5x22 - Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 8 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Length [mm]: 31
- Outer Diameter [mm]: 26
-
External Thread Size: M18 x 1,
5 - Thread Length [mm]: 23
- Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
-
Surface: Zinc-
coated - Screw length below head [mm]: 26
- Weight [kg]: 0.055
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
- Additional information: FE37942
- Lisainfo: FE37942
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 31
- Outer Diameter [mm]: 26
-
External Thread Size: M18 x 1,
5 - Thread Length [mm]: 23
- Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Screw length below head [mm]: 26
- Weight [kg]: 0.055
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 31
- Outer Diameter [mm]: 26
-
External Thread Size: M18 x 1,
5 - Thread Length [mm]: 23
- Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
-
Surface: Zinc-
coated - Screw length below head [mm]: 26
- Weight [kg]: 0.055
- Supplementary Article/Info 2: with seal ring
- Name: SW 70 93 7942
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Materjal: Metall
-
Keermemõõt: M18x1,
5 - Pikkus (mm): 31
- Kruvipikkus kruvipea all [mm]: 22
-
Kruvipea-/Mutriprofiil: sise-
Torx - Võtmekaugus: 8
- Materjal tihend: Vask
- Siseläbimõõt [mm]: 18
- Välisläbimõõt [mm]: 26
-
Jämedus/Tugevus (mm): 1,
5 - Konteineri tüüp: Kott
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks