• Engine Code: 939 A1.000
• Thread Size: M14x1.5
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO PARTS

• Length [mm]: 63
• Spanner Size: 19
• Colour: green
• Number of pins: 2
• Thread Size: M12 x 1,5, M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Engine Code: 939 A1.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Manufacturer: FACET

• Length [mm]: 63
• Spanner Size: 19
• Housing Colour: green
• Manufacturer: KAMOKA

• Pressure [bar]: 0.3
• Thread Size: M 14 x 1,5
• for OE number: 1535416
• Manufacturer: MEAT&DORIA

• Engine Code: 939 A1.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

Manufacturer: FAST

• Fabrication Number: ECT-PL-007
• Manufacturer: NTY
• Name: NTY ECT-PL-007

• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46554621
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Pressure [bar]: 0.35
• Thread Size: M14 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.42
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE
• Additional information: 12430 FAE
• Lisainfo: 12430 FAE

• Engine Code: 939 A1.000
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Thread Size: M14x1,50
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: MAG

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER
• Additional information: WS2633
• Lisainfo: WS2633

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: FE12228
• Lisainfo: FE12228

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 70 23 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Housing Colour: green
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10252

• Engine Code: 939 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

for article number: 7.3233K, 7.8115, 7.8179, 7.8180, 7.8405, 7.8411, 7.8572, 7.8580, 7.8581, 7.8582, 7.8585, 7.8639, 7.8669, 7.8670, 7.8673, 7.8675

• Engine Code: 939 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.233K, 1.880.115, 1.880.179, 1.880.180, 1.880.405, 1.880.411, 1.880.572, 1.880.580, 1.880.581, 1.880.582, 1.880.585, 1.880.639, 1.880.669, 1.880.670, 1.880.673, 1.880.675

• Engine Code: 939 A1.000
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: 939 A1.000
• Construction Year to: 07.2008
• Number of pins: 2
• Name: Lliti,sidurdamine(Mootorijuhtimine)
• Manufacturer: MAX

• Length [mm]: 63
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Screw length below head [mm]: 27
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Construction Year to: 12.2009
• Number of pins: 2
• Housing Colour: green
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: ECP-AR-003
• Manufacturer: NTY
• Name: NTY ECP-AR-003

• for OE number: 46798352
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Engine Code: 939 A1.000
• Construction Year to: 07.2008
• Operating Mode: Mechanical
• Manufacturer: FACET

• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 939 A1.000
• Construction Year to: 07.2008
• Operating Mode: Mechanical
• Name: LšLITI,SIDURDAMINE(GRA)
• Manufacturer: EPS

• Fabrication Number: ECP-PL-011
• Manufacturer: NTY

• for OE number: 46432103
• Sensor Type: Active sensor
• Manufacturer: KAMOKA
• Additional information: 108-014-375
• Lisainfo: 108-014-375

• Operating Mode: Mechanical
• Number of pins: 2
• Fitting Position: Footwell
• Housing Colour: grey
• Weight [kg]: 0.011
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 770
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 939 A1.000
• Manufacturer: FACET

• Engine Code: 939 A1.000
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

Manufacturer: FAST

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV245
• Manufacturer: ESEN SKV

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 939 A1.000
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: 939 A1.000
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• for OE number: 46481640
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

Manufacturer: FAST

• Number of pins: 3
• Manufacturer: DELPHI ELEKTRONIKA

• Engine Code: 939 A1.000
• Length [mm]: 720
• Manufacturer: FACET

• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

• Construction Year to: 12.2009
• Length [mm]: 755
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Construction Year to: 12.2009
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Length [mm]: 770
• Number of connectors: 3
• Cable Length [mm]: 720
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 939 A1.000
• Weight [kg]: 0.102
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: with housing
• Fabrication Number: EPP-PL-006
• Manufacturer: NTY

• Number of pins: 3
• Version: IAM
• Manufacturer: METZGER

• Construction Year from: 11.2007
• Housing Type: with housing
• Number of pins: 4
• Fabrication Number: EPP-AR-004
• Manufacturer: NTY

• Length [mm]: 770
• Number of connectors: 3
• Cable Length [mm]: 720
• Weight [kg]: 0.07
• Name: SW 70 92 8386
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2009
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Chemical Properties: Oil resistant
• Number of pins: 1
• Cable Length [mm]: 80
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with copper casing, with protection hose
• Supplementary Article/Supplementary Info: with cable tie
• Temperature range from [°C]: -25
• Temperature range to [°C]: +125
• SVHC: No SVHC present!
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• for OE number: 51782033
• Manufacturer: KAMOKA

• Construction Year to: 11.2007
• Quality class: PJ
• Name: Air flow sensor

• Construction Year from: 12.2007
• Construction Year to: 12.2009
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV165

• Length [mm]: 770
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-PL-009
• Manufacturer: NTY

• Fabrication Number: ESL-HY-513
• Manufacturer: NTY

Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: Front, before catalytic converter, after catalytic converter

• Construction Year to: 10.2007
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Used part return not required:
• Weight [kg]: 0.25
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Construction Year to: 10.2007
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.25
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV096
• Manufacturer: ESEN SKV

• Construction Year to: 11.2007
• Number of pins: 4
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Construction Year to: 12.2008
• Number of pins: 4
• Manufacturer: DELLO AUTOMEGA

• Oxygen Sensor: Diagnostic Probe, Broadband oxygen sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 401
• Manufacturer: DELPHI ELEKTRONIKA

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Construction Year to: 12.2009
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Guarantee: 5 years guarantee
• Manufacturer: HITACHI

• Recommended additional repairs: Air Filter
• Manufacturer: FAST

• Oxygen Sensor: Oxygen Sensor
• Overall Length [mm]: 400
• Manufacturer: FAST

• Engine Code: 939 A1.000
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Manufacturer: FACET

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Construction Year to: 12.2007
• Housing Type: with housing
• Number of pins: 4
• Housing material: Plastic
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 939 A1.000
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.276
• Manufacturer: EPS

• Alternatively:
• Number of pins: 4
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Manufacturer: ERA

• Engine Code: 939 A1.000
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Model Year to: 2009
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.