Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 2
- Weight [kg]: 0.017
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 240660144
- Manufacturer: MEAT&DORIA
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660016
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25026 MD
- Lisainfo: 25026 MD
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660002
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25002 MD
- Lisainfo: 25002 MD
- Supplementary Article/Supplementary Info: with accessories
- Number of pins: 5
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 53SKV124
- Length [mm]: 210
- Number of pins: 636
- Number of circuits: 4
- Cable insulation material: Silicone
- for OE number: 1J0973724
- Manufacturer: MEAT&DORIA
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Number of pins: 3
- Supplementary Article/Info 2: with plug
- Number of circuits: 6
- Weight [kg]: 0.038
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Injector Nozzle
- Cable Length [mm]: 500
- Supplementary Article/Supplementary Info: with shrink connector
- Number of circuits: 2
- Weight [kg]: 0.05
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 250
- Number of circuits: 1
- Cross Section [mm²] from: 0.75
- Cable insulation material: Silicone
- for OE number: 240660114
-
Name: Paranduskomplekt,
kaablikomplekt - Manufacturer: MD
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 4
- Weight [kg]: 0.044
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 100
- Supplementary Article/Info 2: without bellow
- Number of circuits: 2
- Weight [kg]: 0.021
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Tail Light
- Cable Length [mm]: 100
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: without bellow
- Number of circuits: 4
- Weight [kg]: 0.03
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of circuits: 2
- Cable Length [mm]: 100
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Connector Shape: angular
- Cable cross-section from [mm²]: 4
- Cable cross-section to [mm²]: 4
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Manufacturer: METZGER
- for OE number: 00006450XR
- Manufacturer: MEAT & DORIA
- Heating/Cooling: for vehicles with factory fitted air conditioning
- Number of circuits: 4
- Cable Length [mm]: 100
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Connector Shape: angular
-
Cable Cross Section [mm²]: 1.5,
4 - Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Product must be determined on the vehicle or the motor:
- Article number of recommended accessories: 0917108
- Manufacturer: METZGER
- Fitting Position: Between interior blower and series resistor
- Cable insulation material: Silicone
- Supplementary Article/Info 2: with plug
- Cable Length [mm]: 100
- Number of circuits: 4
- Cable Cross Section [mm²]: 4
-
Material: CuSn
(copper- tin) - Supplementary Article/Supplementary Info: with shrink squeeze connector
- Manufacturer: METZGER
- Fitting Position: Between interior blower and series resistor
-
Manufacturer Restriction: Alfa Romeo,
Fiat, Opel - Number of pins: 5
- Number of occupied pins: 5
- Supplementary Article/Supplementary Info: with socket housing
- Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Cable Length [mm]: 150
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- for OE number: 55702407
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondi kmpl, salongi soojapuhur(mootorieelsoojendus)
- Fitting Position: Vehicle Tailgate
- Cable insulation material: Silicone
- Length [mm]: 280
- Number of pins: 15
- for OE number: 240660011
- Manufacturer: MEAT&DORIA
- Number of circuits: 5
- Cable Length [mm]: 100
- Fitting Position: inner
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Connector Shape: angular
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Product must be determined on the vehicle or the motor:
- Article number of recommended accessories: 0917108
- Manufacturer: METZGER
- Number of circuits: 34
- Supplementary Article/Supplementary Info: with squeeze connector
-
Fitting Position: Front,
both sides - Cable Length [mm]: 300
- Weight [kg]: 0.178
- Observe service information:
-
Name: Kaabli remondikomplekt,
uks - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Vehicle Door,
Left Front, Right Front - Supplementary Article/Info 2: without bellow
- Plug Type: Butt Joint
- Cable Length [mm]: 300
- Number of circuits: 34
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Manufacturer: METZGER
- Fitting Position: Vehicle Tailgate
- Cable Length [mm]: 250
- Supplementary Article/Supplementary Info: with hose
- Supplementary Article/Info 2: with bellow
- Number of circuits: 14
- Weight [kg]: 0.07
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks