Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Manufacturer: FAST
- Fitting Position: Front Axle
- Height [mm]: 207
- SVHC: No SVHC present!
- Name: LU 810013310
- Manufacturer: FAG
- Engine Code: F1AGL4114
- Spring Type: for vehicles with single leaf suspension
- Length [mm]: 203
- Inner Diameter [mm]: 84
- Material: Thermoplast
-
Fitting Position: Front Axle Right,
Front Axle Left - Weight [kg]: 0.09
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Fabrication Number: EZC-
FT- 188 -
Name: NTY EZC-
FT- 188 - Manufacturer: NTY
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Name: FS FT18398
- Manufacturer: FAST
- Suspension: for vehicles with standard suspension
- Length [mm]: 207
- Fitting Position: Front Axle
- Weight [kg]: 0.23
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 50705790
- Fitting Position: Front Axle
- Material: Plastic
- Weight [g]: 74
- Name: IM 27999
- Manufacturer: ORIGINAL IMPERIUM
- Weight [kg]: 0.114
- Spring Type: for vehicles with double leaf suspension
- Required quantity: 2
-
Fitting Position: Lower,
Rear Axle - Name: TG TED10629
- Manufacturer: TEDGUM
- Fitting Position: Front Axle
-
Version: 11Q/
15Q/ 17Q LIGHT - Manufacturer: FAST
- Fitting Position: Rear Axle both sides
- Manufacturer: OYODO
- Engine Code: F1AE0481D
- Suspension: for vehicles with heavy duty suspension
- Thickness [mm]: 100
- Inner Diameter [mm]: 30
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.15
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Version: 17Q HEAVY/
20Q - Manufacturer: FAST
- Fitting Position: Front Axle
- Height [mm]: 205
- Weight [kg]: 0.16
- Packaging length [cm]: 20.5
- Packaging width [cm]: 10.6
- Packaging height [cm]: 10.6
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: AB-
CT- 005
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
Lower - Material: Rubber
-
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Height [mm]: 90
-
Axle Load [t]: 3.5,
4 -
Material: PU
(Polyurethane) - Weight [g]: 151
- Name: IM 29973
- Manufacturer: ORIGINAL IMPERIUM
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Name: CFD PK2382
- Manufacturer: DACO
Fitting Position: Front Axle
- Engine Code: F1AE0481D
- Suspension: for vehicles without heavy duty suspension
- Length [mm]: 108
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.16
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: F1AE0481D,
F1AGL4114 - Block Separation:
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M10 x 1,
25 - Manufacturer: OYODO
Suspension: for vehicles without active suspension, for vehicles with heavy duty suspension
- Fitting Position: Rear Axle
- Height [mm]: 129
-
for article number: 00219284,
TED75903 - Weight [kg]: 0.217
- Outer Diameter [mm]: 88
- Inner Diameter [mm]: 19
- Required quantity: 2
- Name: TG 00219271
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 108
- Manufacturer: FAST
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: FAST
- Fitting Position: Front Axle
- for OE number: 1613189980
- Manufacturer: KAMOKA
- Suspension: for vehicles without active suspension
- Weight [kg]: 0.53
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Length [mm]: 150
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle
- for OE number: 5033A6
- Manufacturer: KAMOKA
- Spring Type: for vehicles without hydropneumatic suspension
-
Fitting Position: Rear Axle both sides,
Rear Axle Middle - Spring Design: Leaf spring
- Height of bump stop [mm]: 155
- Name: CFD PK0901
- Manufacturer: DACO
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: FAST
- Required quantity: 2
- Outer Diameter [mm]: 87
- Weight [kg]: 0.727
- Height [mm]: 137
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 10
- Name: TG 00219266
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle,
Front Axle both sides - Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
JUMPER/DUCATO/BOXER
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
JUMPER/DUCATO/BOXER
(kvaliteediklass: PJ)"
- for OE number: 503341
- Fitting Position: Front Axle
- Weight [g]: 369
- Component Number: 4
- Name: IM 50085
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 516688
- Fitting Position: Rear Axle
- Weight [g]: 457
- Name: IM 29970
- Manufacturer: ORIGINAL IMPERIUM
-
for OE number: 5033A6,
93501847 - Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Weight [g]: 436
- Component Number: 4
- Name: IM 50668
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Name: MM APK0109
- Manufacturer: MAGNETI MARELLI
- Engine Code: F1AGL4114
- Spring Type: for vehicles with single leaf suspension
- Suspension: for vehicles with heavy duty suspension
- Length [mm]: 203
- Width [mm]: 82
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Front Axle
- Weight [kg]: 0.418
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Width [mm]: 60
- Inner Diameter [mm]: 25
- Outer Diameter [mm]: 129
- Number of Holes: 4
- Bearing Type: Angular Ball Bearing
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Name: CFD PK0906
- Manufacturer: DACO
- Suspension: for vehicles without active suspension
- Weight [kg]: 0.65
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Length [mm]: 165
- Manufacturer: DENCKERMANN AMORTYZATORY
- Spring Type: for vehicles without air suspension
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Name: KY 910159
- Manufacturer: KYB
- Additional information: 910159 KAYABA
- Lisainfo: 910159 KAYABA
- Fitting Position: Front Axle
- Payload: for increased payload
- SVHC: No SVHC present!
- Name: LU 811010530
- Manufacturer: FAG
- Fitting Position: Rear Axle
- Name: Leaf spring buffer left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Gross vehicle weight [kg]: 3,
000, 3, 300, 3, 500 - Height [mm]: 138
- Length [mm]: 89
- Required quantity: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.53
- Manufacturer: TEDGUM_TD
- Suspension: for vehicles without active suspension
- Weight [kg]: 0.52
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Length [mm]: 135
- Manufacturer: DENCKERMANN AMORTYZATORY
- Engine Code: F1AGL4114
- Spring Type: for vehicles with single leaf suspension
- Suspension: for vehicles with heavy duty suspension
- Length [mm]: 101
- Width [mm]: 91
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.119
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: F1AGL4114
- Spring Type: for vehicles with single leaf suspension
- Suspension: for vehicles without heavy duty suspension
- Length [mm]: 109
- Width [mm]: 66
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.128
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Name: Leaf spring buffer left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
- Construction Year to: 05.2011
- Fitting Position: Front Axle
- Vehicle type: Ducato 33
- Quantity per packing unit: 2
- Weight [kg]: 0.6
- Guarantee: 5 years guarantee
- Packaging length [cm]: 9.5
- Packaging width [cm]: 30
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Manufacturer: SACHS
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: FAST
- Suspension: for vehicles without active suspension
- Length [mm]: 135
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.52
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Name: SE D5-
168 - Manufacturer: AUTOFREN SEINSA
- Suspension: for vehicles without active suspension
- Length [mm]: 165
-
Material: PU
(Polyurethane) -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.65
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle type: Light 28-
35 - Fitting Position: Front Axle
- Spring Type: for vehicles with coil spring suspension
-
Name: BI 11-
299370 - Manufacturer: BILSTEIN
- Engine Code: F1AE0481D
- Suspension: for vehicles without heavy duty suspension
- Length [mm]: 300
- Width [mm]: 85
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Front Axle
- Weight [kg]: 0.25
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 516697
- Fitting Position: Rear Axle
- Weight [g]: 702
- Name: IM 29971
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Height [mm]: 114
- for OE number: 5166A3
- Manufacturer: SASIC
- for OE number: 516688
- Fitting Position: Rear Axle
- Weight [g]: 913
- Name: IM 50643
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Manufacturer: FAST
- Suspension: for vehicles without active suspension
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Height of bump stop [mm]: 135
- Lisainfo: 940006 NIS
- Additional information: 940006 NIS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks