• Vehicle Equipment: for vehicles with start-stop function
• Fabrication Number: ESL-FT-004
• Manufacturer: NTY
• Name: NTY ESL-FT-004

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Engine Code: 169 A4.000
• Thread Size: M14x1.5
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO PARTS

• Võtmekaugus: 19
• OE-numbri jaoks: 55190791
• Manufacturer: KAMOKA

• Engine Code: 169 A4.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: 169 A4.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Surve (bar): 0,3
• Keermemõõt: M14x1,5
• Võtmekaugus: 21
• Manufacturer: FACET

• Lülitusrõhk [bar]: 0,5
• Keermemõõt: M14x1.5
• Anduritüüp: kinnine anduri ehitusviis
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Surve (bar): 5
• Korpusevärv: must
• Keermemõõt: M14x1.5-6g
• Läbimõõt [mm]: 21
• Võtmekaugus: 21
• Pistikkontaktide arv: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

Manufacturer: FAST

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: must
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 55190791
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Engine Code: 169 A4.000
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lülituspunkt alates [bar]: 0,2
• Lülituspunkt kuni [bar]: 0,5
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 21
• Ühenduste arv: 1
• Värv: must
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: FE12228
• Lisainfo: FE12228

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lülituspunkt alates [bar]: 0,2
• Lülituspunkt kuni [bar]: 0,5
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 21
• Ühenduste arv: 1
• Värv: must
• Kaal (kg): 0,04
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: BLUEPRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 169 A4.000
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Väliskeerme mõõde: M12 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: pruun
• Kaal (kg): 0,024
• OE-numbri jaoks: 55190791
• Name: SW 70 10 6570
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pinge [V]: 12
• Surve (bar): 0,3
• Lüliti funktsioon: avaja
• Keermemõõt: M14x1,5
• Võtmekaugus: 21
• Pistikkontaktide arv: 1
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6ZL003259601

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-AR-000
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 09.2010
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV499

• Fabrication Number: ESS-FT-000
• Manufacturer: NTY

• for OE number: 55229700
• Length [mm]: 71
• Fabrication Number: ECP-AR-005
• Manufacturer: NTY
• Name: NTY ECP-AR-005

• Engine Code: 169 A4.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.326K, 1.880.672, 1.880.699, 1.880.701, 1.880.758, 1.880.938

• Engine Code: 169 A4.000
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• tootekoodile: 7.3326K, 7.8672, 7.8699, 7.8701, 7.8758, 7.8938
• Manufacturer: FACET

• Number of pins: 2
• Manufacturer: FAST

• Engine Code: 169 A4.000
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Voltage [V]: 12
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Vehicle Equipment: for vehicles without start-stop function
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PU009168701
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Kõrgus (mm): 28
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Manufacturer: VERNET

• Engine Code: 169 A4.000
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: 169 A4.000
• Manufacturer: FACET

• Emission Standard: Euro 4/Euro 5
• Kõrgus (mm): 34,5
• Takistus [oom]: 1 100
• Ühenduste arv: 2
• Manufacturer: VERNET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. FIAT 500 1,4 02-
• Manufacturer: BRM

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: FAST

• Construction Year to: 12.2011
• Vehicle Equipment: for vehicles with start-stop function
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. FIAT PUNTO 1,2 99-
• Manufacturer: BRM

• Number of connectors: 3
• Manufacturer: JPN

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Construction Year from: 09.2010
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Garantii: 5 aastat garantii
• Üldine informatsioon: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Vehicle Equipment: for vehicles with start-stop function
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 169 A4.000
• Anduritüüp: Aktiivne andur
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Vehicle Equipment: for vehicles without start-stop function
• Pistikkontaktide arv: 3
• Name: DE SS11080
• Manufacturer: DELPHI

• Vehicle Equipment: for vehicles without start-stop function
• Pikkus (mm): 71
• Ühenduste arv: 2
• Kaal (kg): 0,044
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550245
• Manufacturer: ERA

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: FAE

• Pinge [V]: 12
• Pistikkontaktide arv: 2
• Väändejõud [Nm]: 20
• Piirangutega toode/piirangu info 2: ilma kaablita
• Vastab originaalosa värvile: must
• Pistikute teostus: Lamepistik
• Pistikukatte kuju: ristkülik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PG013114331

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2011
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Vehicle Equipment: for vehicles without start-stop function
• Pikkus (mm): 70,8
• Ühenduste arv: 2
• Kaal (kg): 0,044
• Name: SW 70 94 4841
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 169 A4.000
• Name: EP 1.957.115
• Manufacturer: EPS

• Vehicle Equipment: for vehicles without start-stop function
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Vehicle Equipment: for vehicles with start-stop function
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Vehicle Equipment: for vehicles with start-stop function
• Fabrication Number: ESL-AR-001
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without cable
• Manufacturer: VDO

• Kinnitusaukude hulk: 1
• Pinge [V]: 12
• Takistus [oom]: 1 100
• Tolerants (%): 10
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 169 A4.000
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: 169 A4.000
• Manufacturer: FACET

• Number of pins: 2
• Housing Colour: black
• Manufacturer: VDO

• Construction Year to: 12.2011
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Lambda andur: Bistabiilne andur
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Pistikkontaktide arv: 2
• Manufacturer: DELPHI
• Name: DE AS10170

• Ühenduste arv: 3
• Installatsiooni pool: üleval
• Kaal (kg): 0,026
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Manufacturer: DELPHI
• Name: DE SS11146

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 28,2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168081

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Ühenduste arv: 3
• Installatsiooni pool: üleval
• Kaal (kg): 0,026
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: BLUE PRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV122

• Fitting Position: Front
• Vehicle Equipment: for vehicles with start-stop function
• Oxygen Sensor: Diagnostic Probe
• Ühenduste arv: 4
• Pikkus (mm): 325
• Manufacturer: VERNET

• Construction Year to: 12.2011
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Pinge [V]: 12
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Takistus [oom]: 1 100
• Kaal (kg): 0,05
• Manufacturer: VALEO

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Equipment: for vehicles without start-stop function
• Kaablipikkus (mm): 385
• Lambda andur: Titaanandur, soojendatud
• Name: DE ES20236-12B1
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)"

• Construction Year to: 12.2011
• Vehicle Equipment: for vehicles with start-stop function
• Ühendushulk: 4
• Takistus [oom]: 6
• Pikkus (mm): 325
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 325
• Lambda andur: soojendatud
• Name: Lambda andur
• Manufacturer: MAG

• Engine Code: 169 A4.000
• Oxygen Sensor: Regulating Probe
• Vehicle Equipment: for vehicles with start-stop function
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Pikkus (mm): 350
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 12.2011
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Kaal (kg): 0,08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• keem.omadus: õlikindel
• Pistikkontaktide arv: 1
• Kaablipikkus (mm): 80
• Kaabli ristlõige [mm²]: 1
• Kokkupuutepind: tinutatud
• Piirangutega toode/piirangu info 2: vaskhülsiga, koos kaitsevoolikuga
• Piirangutega toode/piirangu info: Kaablisidemega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +125
• SVHC: SVHS aineid ei esine
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Tootja piirang: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• Construction Year to: 12.2011
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Equipment: for vehicles without start-stop function
• Block Separation:
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: FAE

• Ülekandeliinide arv: 4
• Takistus [oom]: 9
• Ühendushulk: 4
• Pikkus (mm): 350
• Kaablipikkus (mm): 350
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: 169 A4.000
• Fitting Position: after catalytic converter
• Vehicle Equipment: for vehicles with start-stop function
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: EP 1.998.097
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Construction Year to: 12.2011
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Equipment: for vehicles without start-stop function
• Block Separation:
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 325
• ka universaaltootena saadav vaata toode-nr.: 0258986615
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Kaablipikkus (mm): 300
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20302-12B1

Fitting Position: after catalytic converter, before catalytic converter Vehicle Equipment: for vehicles without start-stop function, for vehicles with start-stop function

• Vehicle Equipment: for vehicles without start-stop function
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Model Year to: 2011
• Block Separation:
• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 430
• Kaal (kg): 0,084
• Name: SW 33 10 3140
• Manufacturer: SWAG