Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with integrated ABS sensor
- Width [mm]: 37
- Inner Diameter [mm]: 37
- Outer Diameter [mm]: 74
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 37
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: with integrated ABS sensor
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
-
Lisainfo: 2854/
MG -
Additional information: 2854/
MG
-
Fitting Position: Front Axle Left,
Front Axle Right - Number of Teeth, ABS ring: 96
- Width 1 [mm]: 37
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 74.04
- Inner Diameter 1 [mm]: 37
- Manufacturer: GSP
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with integrated ABS sensor
- Width [mm]: 37
- Outer Diameter [mm]: 74
- Manufacturer: KAMOKA
- Payload: not for increased payload
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Outer Diameter [mm]: 74
- for OE number: 71 729 125
- Braking/Drive Dynamics: for vehicles with ABS
- Weight [kg]: 0.763
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M12X1,
25 - Number of Teeth, ABS ring: 96
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 117.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Inner Diameter 2 [mm]: 30
- Manufacturer: GSP
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 37
- Outer Diameter 1 [mm]: 74
- Manufacturer: KAVO PARTS
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 37
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Manufacturer: OPTIMAL
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: FRONT LR+FR
- for OE number: 46836196
- Inner Diameter [mm]: 37
- Width 1 [mm]: 37
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Name: DA KWD1088
- Manufacturer: DAYCO
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Rim Hole Number: 5
- Width 1 [mm]: 61
- Outer Diameter 1 [mm]: 117
- Inner Diameter 1 [mm]: 30
- Manufacturer: JPN
- Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Payload: not for increased payload
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with integrated magnetic sensor ring
- Inner Diameter [mm]: 37
- Outer Diameter [mm]: 74
- Height [mm]: 37
- Braking/Drive Dynamics: for vehicles with ABS
- Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 37
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel bearing kit
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter [mm]: 117
- Name: Rattalaagrikomplekt
- Manufacturer: MAX
- Payload: not for increased payload
- Width [mm]: 37
- Inner Diameter [mm]: 37
- Outer Diameter [mm]: 74
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.78
- Supplementary Article/Supplementary Info: with axle nut
- Observe service information:
- Manufacturer: FEBI
Supplementary Article/Info 2: with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Payload: for increased payload
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 37
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: with integrated ABS sensor
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [kg]: 0.856
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 6
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter [mm]: 74
- Inner Diameter [mm]: 37
- Width [mm]: 37
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Supplementary Article/Info 2: with rubber mount
-
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: SNR
- Name: SN R158.54
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter [mm]: 120
- Name: Rattalaagrikomplekt
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 96
- Outer Diameter [mm]: 120
- Braking/Drive Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 2.05
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 98
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV301
-
Fitting Position: Right,
Left, Front Axle - Manufacturer: SNR
- Braking/Drive Dynamics: for vehicles with ABS
- Supplementary Article/Info 2: with wheel hub
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: KLT-
FT- 018 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Version: One
-
Thread Size: M12X1,
25 - Number of Teeth, ABS ring: 96
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 117.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Inner Diameter 2 [mm]: 30
- Manufacturer: GSP LOZYSKA I PIASTY KOL
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 96
- Outer Diameter [mm]: 118
- Braking/Drive Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 1.8
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 98
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV300
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M12X1,
25 - Inner Diameter [mm]: 30
- Outer Diameter [mm]: 117.5
- Rim Hole Number: 5
- Inner Diameter 2 [mm]: 30
- Manufacturer: GSP
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Vehicle configuration line / variant: -
ABS # ABS - Braking/Drive Dynamics: for vehicles without ABS
- for OE number: 51810395
- Inner Diameter [mm]: 30
- Width 1 [mm]: 72
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Name: DA KWD1393
- Manufacturer: DAYCO
-
Fitting Position: Rear Axle Right,
Rear Axle Left -
Manufacturer: SNR /
NTN- SNR/
- Equipment Code: 943
- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 98
- Number of Holes: 5
- Number of Teeth, ABS ring: 96
- Bearing Type: Ball Bearing
- Name: Rattarumm
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated wheel bearing, with integrated magnetic sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with accessories
- Outer Diameter [mm]: 117.5
- Bolt Hole Circle Ø [mm]: 98
- Number of Holes: 5
- Number of Teeth, ABS ring: 96
-
Thread Size: M12x1,
25 - Bearing Type: Ball Bearing
- Name: Rattarumm
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Payload: not for increased payload
- Width [mm]: 61
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 117
- Manufacturer: OPTIMAL
- Fitting Position: Rear Axle
- Width [mm]: 72
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Payload: for increased payload
- Manufacturer: OPTIMAL
-
Fitting Position: Right,
Left, Rear Axle - Supplementary Article/Info 2: with rubber mount
- Width 1 [mm]: 69.35
- Outer Diameter 1 [mm]: 120
- Inner Diameter 1 [mm]: 30
- Manufacturer: SNR
- Name: SN R141.26
- Braking/Drive Dynamics: for vehicles without ABS
- Payload: not for increased payload
- Width [mm]: 117.5
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 117.5
- Bolt Hole Circle Ø [mm]: 98
- Bearing Type: Angular Ball Bearing
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.64
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: with rubber mount
- Outer Diameter 1 [mm]: 117
- Width 1 [mm]: 61
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: SNR
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Vehicle configuration line / variant: ABS # -
ABS - Braking/Drive Dynamics: for vehicles without ABS
- for OE number: 52056182
- Inner Diameter [mm]: 30
- Width 1 [mm]: 62
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Manufacturer: DAYCO ZESTAWY LOZYSK KOL
- Payload: for increased payload
- Width [mm]: 37
- Inner Diameter [mm]: 42
- Outer Diameter [mm]: 83
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.94
- Supplementary Article/Supplementary Info: with axle nut
- Observe service information:
- Manufacturer: FEBI
Supplementary Article/Info 2: with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Payload: not for increased payload
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 117.4
- Inner Diameter [mm]: 30
- Width [mm]: 59.5
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
- Fitting Position: Rear Axle
- Payload: for increased payload
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 120
- Inner Diameter [mm]: 30
- Width [mm]: 69.5
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
- Braking/Drive Dynamics: for vehicles with ABS
- Payload: not for increased payload
- Width [mm]: 117
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 117
- Bolt Hole Circle Ø [mm]: 98
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.7
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Payload: for increased payload
- Width [mm]: 120
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 98
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI BILSTEIN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Required quantity: 2
- Braking/Drive Dynamics: for vehicles with ABS
- Payload: not for increased payload
- Flange Diameter [mm]: 117.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks