• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE ELEKTRYKA

• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-001
• Manufacturer: NTY

• Engine Code: 939 B5.000
• Fitting Position: Pipe at EGR valve
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.288, 1.880.350, 1.880.811, 1.880.812
• Manufacturer: FACET
• Name: EP 1.830.264

• Engine Code: 939 B5.000
• Fitting Position: Pipe at EGR valve
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8288, 7.8350, 7.8811, 7.8812
• Manufacturer: FACET

• Supplementary Article/Info 2: with plug
• Conductor Number: 5
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 939 B5.000
• Name: EP 1.953.626
• Manufacturer: EPS

• Engine Code: 939 B5.000
• Manufacturer: FACET

• Pressure from [kPA]: 11
• Pressure to [kPA]: 30
• Number of pins: 4
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Fitting Position: Right
• Required quantity: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Number of pins: 4
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10144

• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.07
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Resistor [Ohm]: 13
• Height [mm]: 28
• Manufacturer: VERNET

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11463

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: VERNET

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Pistikkontaktide arv: 3
• Manufacturer: JPN

• Exhaust System: before soot particulate filter
• Engine Code: 940A4000
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 90,000
• for OE number: 05146181AA
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Engine Code: 939 B5.000
• for OE number: K04627187AA, 55219298
• Block Separation:
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

Manufacturer: FAST

• Engine Code: 939 B5.000
• Fitting Position: Intake Manifold
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: oval
• Number of pins: 3
• for OE number: 51 855 119
• Weight [kg]: 0.024
• Vehicle Equipment: for vehicles with diesel soot filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 939 B5.000
• Fitting Position: Intake Manifold
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Engine Code: 939 B5.000
• for OE number: K68479983AA, 55216242
• Block Separation:
• Manufacturer: BOSCH

• Engine Code: 939 B5.000
• Fitting Position: Rear
• Pressure to [kPA]: 93
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: VDO

• Engine Code: 939 B5.000
• Fitting Position: Rear
• Pressure to [kPA]: 93
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

Manufacturer: FAST

• Engine Code: 939 B5.000
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Name: CZUJNIK CI—N. PALIWA RENAULT LAGUNA 3.0DCI 08-
• Manufacturer: MAX

• Thread Size: M18X1.5
• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,000
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST
• Lisainfo: FT80062 FAST
• Additional information: FT80062 FAST

• for OE number: 68082426AB
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: EGT-FT-013
• Cable Length [mm]: 100
• Manufacturer: NTY

• Engine Code: 939 B5.000
• Fuel Mixture Formation: Direct Injection
• Supplementary Article/Info 2: High Pressure Side
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Required quantity: 1
• Engine Code: 940A4000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: with housing
• Fabrication Number: EPP-AR-006
• Manufacturer: NTY

• Required quantity: 1
• Engine Code: 940A4000
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 100
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

Manufacturer: AUTO-GH

• Manufacturer Restriction: Citroen, Fiat, Opel, Peugeot
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: HBE

for OE number: 0 261 230 218, 0 281 002 205, 0 281 002 215, 0 281 002 468, 0 281 002 709, 0 281 002 999, 0 281 006 028

• Engine Code: 939 B5.000
• Fitting Position: Intake Manifold
• Number of pins: 4
• for OE number: 55 219 298
• Weight [kg]: 0.045
• Supplementary Article/Info 2: with seal ring
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Cable Length [mm]: 100
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV181

• Operating Mode: Electric
• Voltage [V]: 12
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: PIE

• Thread Size: M14x1,5
• Length [mm]: 218
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MAG

• Exhaust System: before soot particulate filter
• Pikkus (mm): 100
• Keermemõõt: M14 X 1,5
• Pistikkontaktide arv: 2
• Manufacturer: JPN

• Ühenduste arv: 4
• Manufacturer: JPN

• Supplementary Article/Info 2: High Pressure Side
• Pressure to [bar]: 2,000
• Fuel Mixture Formation: Common Rail (CR)
• Thread Size: M18X1,5
• Quality: OE EQUIVALENT
• for OE number: 55230827
• Manufacturer: MEAT&DORIA

• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 450
• Thread Size: M14x1.5
• for OE number: 51852762
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

Manufacturer: AUTO-GH

• Fitting Position: Exhaust Manifold
• Number of pins: 2
• Cable Length [mm]: 505
• Sensor Type: PTC
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: MEY

• Fitting Position: before catalytic converter
• Number of pins: 2
• Cable Length [mm]: 155
• Sensor Type: PTC
• Supplementary Article/Supplementary Info: with retaining
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Name: Ohumassimootja
• Manufacturer: BRM

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• Required quantity: 1
• Engine Code: 940A4000
• Mounting Type: Pipe-neck
• Number of pins: 4
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Alternatively:
• Number of pins: 4
• Outer Diameter 1 [mm]: 70
• Outer Diameter 2 [mm]: 70
• Manufacturer: ERA

• Engine Code: 939 B5.000
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Manufacturer: EPS

• Engine Code: 939 B5.000
• Block Separation:
• Fuel Mixture Formation: Common Rail (CR), Direct Injection
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• Fitting Position: before soot particulate filter
• Cable Length [mm]: 100
• Number of pins: 2
• Manufacturer: METZGER

• Number of pins: 4
• Outer Diameter 1 [mm]: 70
• Outer Diameter 2 [mm]: 70
• Manufacturer: ERA

• Oxygen Sensor: Broadband oxygen sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for OE number: 55204005
• Manufacturer: MEAT&DORIA