• Fitting Position: Front Axle, inner, Lower, in front of axle
• Construction Year to: 08.1999
• Outer Diameter [mm]: 47.12
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.19

• Fitting Position: inner, behind the axle, Front Axle, Lower
• Shape: round
• Mounting Type: Press-fitted, Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60.2
• Height [mm]: 46.5
• Lisainfo: FORD MONDEO II
• Additional information: FORD MONDEO II

• Construction Year to: 08.1999
• Fitting Position: inner, in front of axle, Front Axle, Lower
• Shape: round
• Mounting Type: Press-fitted, Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 47.2
• Height [mm]: 46
• Lisainfo: FORD MONDEO I / II
• Additional information: FORD MONDEO I / II

• Fitting Position: Rear Axle Upper, Upper
• Fabrication Number: ZTT-FR-011B
• Manufacturer: NTY

• Installatsiooni pool: esisild alla, taga
• Laius (mm): 46
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 46
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Lower Front Axle, Front, both sides
• Inner Diameter [mm]: 12
• Weight [kg]: 0.172
• Outer Diameter [mm]: 47.8
• Required quantity: 2
• Manufacturer: TEDGUM_TD

• Installatsiooni pool: esisild mõlemapoolselt, all, ees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Välisläbimõõt [mm]: 47
• Siseläbimõõt [mm]: 12,1
• Pikkus (mm): 45,6
• Kaal (kg): 0,17
• Manufacturer: RTS

• Construction Year to: 08.1999
• Fitting Position: Front Axle Left, Front Axle Right, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 12
• Width [mm]: 28
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 08.1999
• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Jämedus/Tugevus (mm): 46
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 21, 47
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
FORD MONDEO 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO 93-
(kvaliteediklass: PJ)"

• Construction Year to: 08.1999
• Engine Code: L1L
• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Jämedus/Tugevus (mm): 46
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 47, 22
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
FORD MONDEO 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO 93-
(kvaliteediklass: PJ)"

• Engine Code: L1L
• Construction Year to: 08.1999
• Additionally required articles (article numbers): 05664, 05666
• old version:
• Thickness [mm]: 46
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 47, 22
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.183
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 54
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle, Right, Left, Front
• Construction Year to: 08.1999
• Outer Diameter [mm]: 48
• Weight [kg]: 0.17
• Manufacturer: CORTECO
• Name: COC 21652974

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Rear Axle, Upper
• Height [mm]: 35
• Inner Diameter [mm]: 12.4
• Outer Diameter [mm]: 36.3
• Manufacturer: GSP

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Quantity per packing unit: 4
• Axle alignment required after fitting:
• Fitting Position: both sides, Rear, Lower Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 0.089
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower Front Axle, Front, both sides
• Construction Year to: 08.1999
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.175
• Length [mm]: 45.6
• Outer Diameter [mm]: 47.4
• Inner Diameter [mm]: 12
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, Front
• Construction Year to: 08.1999
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 46
• Manufacturer: DELPHI
• Name: DE TD260W

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD MONDEO 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD MONDEO 93-
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild, kese
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,17
• Name: DY 37-04013-7
• Manufacturer: DYS

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60.2
• Length [mm]: 46.5
• paired article number: 270122
• Weight [kg]: 0.26
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 12
• Width [mm]: 46
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Lower, Front
• Construction Year from: 08.1999
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 55
• Thickness 1 [mm]: 46
• Manufacturer: DELPHI
• Name: DE TD555W

• Fitting Position: outer, Rear, inner, Rear Axle, Front, both sides
• Block Separation:
• Outer Diameter [mm]: 36.5
• Inner Diameter [mm]: 12
• Required quantity: 2
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.16
• Manufacturer: TEDGUM_TD

• Construction Year to: 08.1999
• Thickness [mm]: 46
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 47, 21
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.163
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right, outer, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 36
• Inner Diameter [mm]: 12
• Width [mm]: 28
• Quantity per axle: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild mõlemapoolselt, all, taga
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12,1
• Välisläbimõõt [mm]: 60
• Pikkus (mm): 45,9
• Kaal (kg): 0,264
• Manufacturer: RTS

• Engine Code: L1L
• Construction Year to: 08.1999
• Additionally required articles (article numbers): 05664, 05666
• old version:
• Thickness [mm]: 46
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46, 22
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.18
• Name: SW 50 60 0004
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 47
• Length [mm]: 46
• paired article number: 270119
• Weight [kg]: 0.17
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower

Lisainfo: Rubber mount for wishbone, front

• Production date to: 09/00
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• for OE number: 6901534
• Manufacturer: SASIC

• Fitting Position: Lower Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 60.1
• Width [mm]: 46
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829004310

• Required quantity: 2
• Weight [kg]: 0.14
• Control/Trailing Arm Type: for trailing arm
• Fitting Position: Rear Axle, both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38.8
• Manufacturer: TEDGUM

• Fitting Position: Front Axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 46
• Manufacturer: DELPHI
• Name: DE TD281W

• Installatsiooni pool: Esisild, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,2
• Name: DY 37-04013-6
• Manufacturer: DYS

• Installatsiooni pool: Esisild, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,27
• Name: DY 37-04013-62
• Manufacturer: DYS

• Axle alignment required after fitting:
• Fitting Position: Front
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 45.5
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 54
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEYLE

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD MONDEO 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD MONDEO 93-
(kvaliteediklass: PJ)"

• Production date to: 09/00
• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 1074282
• Manufacturer: SASIC

• Construction Year to: 07.1998
• Fitting Position: Rear Axle Left, Rear Axle Right, Front, outer
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 12
• Width [mm]: 45
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 54.5
• Length [mm]: 46
• paired article number: 270131
• Weight [kg]: 0.18
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower

• new version:
• Thickness [mm]: 46
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60, 22
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.261
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, inner
• Control/Trailing Arm Type: for semi-trailing arm
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter 1 [mm]: 37
• Outer Diameter 2 [mm]: 38
• Width [mm]: 55
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829032810

• Fitting Position: inner, Front, both sides, Rear Axle
• Control/Trailing Arm Type: for control arm
• Outer Diameter 1 [mm]: 37.4
• Weight [kg]: 0.258
• Required quantity: 2
• Outer Diameter 2 [mm]: 38.3
• Inner Diameter [mm]: 12
• Height [mm]: 55
• Manufacturer: TEDGUM
• Name: TG 00225989

• Fitting Position: Rear Axle, Rear, Front
• Control/Trailing Arm Type: for trailing arm
• Block Separation:
• Construction Year to: 06.1998
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Width [mm]: 45
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle, both sides, inner, outer
• Control/Trailing Arm Type: Control Arm
• Manufacturer: LEMFORDER
• Name: LMI 2610201

• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 37
• Inner Diameter [mm]: 12
• Width [mm]: 30
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 08.1999
• Thickness [mm]: 46
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 54, 22
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.187
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, outer, inner, Front
• Block Separation:
• Construction Year from: 07.1998
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Width [mm]: 35
• SVHC: No SVHC present!
• Manufacturer: FAG

Control/Trailing Arm Type: for semi-trailing arm, for control arm, for trailing arm

• Construction Year from: 08.1999
• Thickness [mm]: 45.5
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 54, 22
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.21
• Name: SW 50 92 1733
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD MONDEO 96-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD MONDEO 96-
(kvaliteediklass: PJ)"

• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Jämedus/Tugevus (mm): 46
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 60, 22
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
FORD MONDEO 96-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO 96-
(kvaliteediklass: PJ)"

• Fitting Position: Centre, Rear Axle Lower
• Weight [kg]: 0.14
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Fitting Position: Rear, Front Axle, Lower, inner, both sides
• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 334009
• Diameter [mm]: 60
• Height [mm]: 46
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 60.2
• Control/Trailing Arm Type: for control arm
• Name: SK VKDS334009
• Manufacturer: SKF

• Construction Year from: 09.1999
• Fitting Position: Front Axle, inner, in front of axle
• Height [mm]: 45.7
• Weight [kg]: 0.2
• Required quantity: 2
• Shape: round
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 54.5
• Mounting Type: Press-fitted, Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Height [mm]: 46.5
• Weight [kg]: 0.3
• Required quantity: 2
• Shape: round
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60.2
• Mounting Type: Press-fitted, Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

Fitting Position: Front Axle, inner, behind the axle, both sides, Rear

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.2
• Packaging length [cm]: 5.5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Installatsiooni pool: esisild mõlemapoolselt, all, ees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12,1
• Välisläbimõõt [mm]: 54
• Pikkus (mm): 45,6
• Kaal (kg): 0,186
• Manufacturer: RTS

• Fitting Position: Rear Axle Upper, Front
• Weight [kg]: 0.222
• Packaging length [cm]: 6
• Packaging width [cm]: 6
• Packaging height [cm]: 4.6
• Manufacturer: FEBEST

• Required quantity: 2
• Outer Diameter [mm]: 40.3
• Inner Diameter [mm]: 12
• Fitting Position: Rear Axle, Front
• Weight [kg]: 0.13
• Manufacturer: TEDGUM_TD

• Length [mm]: 45
• Width [mm]: 39
• Thickness [mm]: 45
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 39
• Material: Rubber/Metal
• Control/Trailing Arm Type: for semi-trailing arm
• Fitting Position: outer, Rear, Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.13
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 54
• Control/Trailing Arm Type: Control Arm
• Quantity per axle: 2
• Manufacturer: LEMFORDER

• Fitting Position: Rear, Front Axle, Lower, inner, both sides
• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Manufacturer: LEMFORDER

• Fitting Position: Rear Axle, both sides, Rear, outer
• Control/Trailing Arm Type: Semi-Trailing Arm
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!