Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Filter type: Spin-
on Filter - Height [mm]: 75
- Outer Diameter [mm]: 76
- Inner Diameter 1 [mm]: 63
- Inner Diameter 2 [mm]: 72
-
Supplementary Article/Info 2: with one anti-
return valve - Manufacturer: JP GROUP
- Lisainfo: Oil Filter
- Additional information: Oil Filter
-
Filter type: Spin-
on Filter - Height [mm]: 79
- Outer Diameter [mm]: 76
- Inner Diameter 1 [mm]: 62
- Inner Diameter 2 [mm]: 71
-
Supplementary Article/Info 2: with one anti-
return valve - Manufacturer: JP GROUP
- Lisainfo: Oil filter
- Additional information: Oil filter
-
Filter type: Spin-
on Filter - Height [mm]: 85
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 76.5
- Inner Diameter 1 [mm]: 71
- Inner Diameter 2 [mm]: 62
- SVHC: No SVHC present!
- Manufacturer: FILTRON
-
Filter type: Spin-
on Filter -
Supplementary Article/Info 2: with one anti-
return valve - Height [mm]: 81
- Outer Diameter [mm]: 75
- for OE number: 1026285
- Manufacturer: KAMOKA FILTRY
- Filtritüüp: Keeratav filter
- Kõrgus (mm): 80
-
Keermemõõt: 3/
4"- 16 UNF - Välisläbimõõt 1 [mm]: 78
- Siseläbimõõt 1 [mm]: 72
- Siseläbimõõt 2 (mm): 63
- Manufacturer: DENCKERMANN FILTRY
- Kõrgus (mm): 87
-
Keermemõõt: 3/
4"- 16 UNF - Välisläbimõõt [mm]: 77
- Konteineri tüüp: Sahtel
- Filtritüüp: Keeratav filter
-
Versioon: w/
Anti- Drain valve, with By- Pass valve - Avamisrõhk klapp (bar): 1
-
pakendi pikkus [cm]: 7,
8 -
pakendi laius [cm]: 7,
8 - pakendi kõrgus [cm]: 9
- Rõngastihendi läbimõõt alates (mm): 62
-
Rõngastihendi läbimõõt kuni (mm): 71,
5 - Name: CH COF100165S
- Manufacturer: CHAMPION
- Kõrgus (mm): 79
-
Keermemõõt: 3/
4- 16 UNF - Filtritüüp: Keeratav filter
- Välisläbimõõt [mm]: 76
- Siseläbimõõt 1 [mm]: 62
- Siseläbimõõt 2 (mm): 71
- Manufacturer: SCT MANNOL
-
Filter type: Spin-
on Filter - Height [mm]: 76
- Outer Diameter [mm]: 78
-
Internal Thread Size: 3/
4" - 16 UNF - Weight [kg]: 0.29
- Observe service information:
- Manufacturer: BLUE PRINT FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Filtritüüp: Keeratav filter,
Filtrer - Kõrgus (mm): 75
-
Keermemõõt: 3/
4- 16 UNF - Siseläbimõõt 1 [mm]: 55
- Siseläbimõõt 2 (mm): 62
- Välisläbimõõt [mm]: 66
- Manufacturer: SCT MANNOL
-
Filter type: Spin-
on Filter - Height [mm]: 76
- Outer Diameter [mm]: 78
-
Internal Thread Size: 3/
4" - 16 UNF - Weight [kg]: 0.29
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.1994
- Engine Code: JBE
-
Filter type: Spin-
on Filter - Height [mm]: 85
-
Thread Size: UNF 3/
4" - 16 - Outer Diameter [mm]: 77
- Inner Diameter 1 [mm]: 71
- Inner Diameter 2 [mm]: 62
- Bypass Valve Opening Pressure [bar]: 1
- Manufacturer: VALEO
- Filtritüüp: Keeratav filter
- Kõrgus (mm): 74
-
Keermemõõt: 3/
4"- 16 - Välisläbimõõt [mm]: 76
- Name: Oil filter
- Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
- Construction Year to: 12.1994
- Engine Code: JBE
-
Filter type: Spin-
on Filter - Height [mm]: 85
-
Thread Size: UNF 3/
4" - 16 - Outer Diameter [mm]: 77
- Inner Diameter 1 [mm]: 71
- Inner Diameter 2 [mm]: 62
- Bypass Valve Opening Pressure [bar]: 1
- Manufacturer: VALEO
-
Engine Code: J6A,
JBE - Construction Year to: 12.1994
-
Filter type: Spin-
on Filter - Height [mm]: 86.5
-
Thread Size: 3/
4" 16 UNF - Outer Diameter [mm]: 76.7
- Inner Diameter 1 [mm]: 62.4
- Gasket inside diameter [mm]: 71
- Quantity: 1
- Manufacturer: BOSCH
- Name: BS 0451103298
- Filtritüüp: Keeratav filter
- Kaal (g): 246
- Siseläbimõõt 2 (mm): 71
- Siseläbimõõt 1 [mm]: 62
- Avamisrõhk klapp (bar): 1
-
Keermemõõt: 3/
4- 16 UNF - Välisläbimõõt [mm]: 76
- Piirangutega toode/piirangu info 2: koos ühe tagasijooksu sulgurklapiga
- Kõrgus (mm): 74
-
Kaal (kg): 0,
286 - Manufacturer: ACKOJA
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [g]: 246
- Inner Diameter 2 [mm]: 71
-
Filter type: Spin-
on Filter - Inner Diameter 1 [mm]: 62
- Bypass Valve Opening Pressure [bar]: 1
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 76
-
Supplementary Article/Info 2: with one anti-
return valve - Height [mm]: 74
- Weight [kg]: 0.286
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 78
-
Filter type: Spin-
on Filter -
Thread Size: 3/
4"- 16 UNF - Height [mm]: 92
- Manufacturer: MEYLE
-
Filter type: Spin-
on Filter - Diameter [mm]: 75
- Height [mm]: 80
-
Thread Size: 3/
4"- 16UNF - Diameter 2 [mm]: 71
- Sealing Ring Diameter [mm]: 61.7
- Tightening Torque [Nm]: 20
- Article number of the recommended special tool: OCS 1
-
Supplementary Article/Info 2: with one anti-
return valve - Valve type: Overflow Valve
- Packaging height [cm]: 7.5
- Packaging length [cm]: 7.8
- Packaging width [cm]: 7.8
- Manufacturer: MAHLE KNECHT
-
Filter type: Spin-
on Filter - Diameter [mm]: 75
- Height [mm]: 80
-
Thread Size: 3/
4"- 16UNF - Diameter 2 [mm]: 71
- Sealing Ring Diameter [mm]: 61.7
- Tightening Torque [Nm]: 20
- Article number of the recommended special tool: OCS 1
-
Supplementary Article/Info 2: with one anti-
return valve - Valve type: Overflow Valve
- Net Weight [g]: 263
- Packaging height [cm]: 7.5
- Packaging length [cm]: 7.8
- Packaging width [cm]: 7.8
- Manufacturer: KNECHT
- Filtritüüp: Keeratav filter
- Kõrgus (mm): 74
- Välisläbimõõt [mm]: 76
- Läbimõõt 3 (mm): 62
- Läbimõõt 4 (mm): 72
-
Keermemõõt 1: 3/
4"- 16 - Manufacturer: PURFLUX
- Diameter [mm]: 76.7
-
Filter type: Spin-
on Filter -
Thread Size: 3/
4"- 16 UNF - Height [mm]: 86
- Height 1 [mm]: 84.5
- Diameter 1 [mm]: 74
-
Supplementary Article/Info 2: with one anti-
return valve - Bypass Valve Opening Pressure [bar]: 1
- Manufacturer: MEYLE
-
Filter type: Spin-
on Filter - Outer Diameter [mm]: 75
- Sealing Ring Diameter [mm]: 72
-
Thread Size: 3/
4- 16 UNF - Height [mm]: 87
- Manufacturer: HENGST FILTRY
-
Filter type: Spin-
on Filter - Article number of the recommended special tool: LS 7
- Height [mm]: 79
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 76
-
Supplementary Article/Info 2: with one anti-
return valve - Bypass Valve Opening Pressure [bar]: 1
- Gasket inside diameter [mm]: 62
- Gasket outside diameter [mm]: 71
- SVHC: No SVHC present!
- Manufacturer: MANN FILTRY
-
Filter type: Spin-
on Filter - Inner Diameter 1 [mm]: 62
- Height [mm]: 79
-
Supplementary Article/Info 2: with one anti-
return valve -
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 76
- Inner Diameter 2 [mm]: 71
- Bypass Valve Opening Pressure [bar]: 1
- Weight [kg]: 0.273
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Filtritüüp: Keeratav filter
- Kõrgus (mm): 85
-
Keermemõõt: UNF 3/
4"- 16 -
Välisläbimõõt [mm]: 76,
5 - Siseläbimõõt 1 [mm]: 70
- Siseläbimõõt 2 (mm): 62
- Manufacturer: PROFIPOWER
- Height [mm]: 119
- Outer Diameter [mm]: 86
- Inner Diameter 2 [mm]: 71
- Bypass Valve Opening Pressure [bar]: 2.5
-
Thread Size: 3/
4- 16 UNF -
Filter type: Spin-
on Filter -
Supplementary Article/Info 2: with one anti-
return valve - Inner Diameter 1 [mm]: 62
- Weight [kg]: 0.5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks