Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: J6A
-
Thread Size: 1/
8- 27NPT - Spanner Size: 13
- Manufacturer: FACET
- Engine Code: J6A
-
Thread Size: 1/
8- 27NPT - Spanner Size: 13
- Manufacturer: EPS
- Number of pins: 2
- Connector Shape: round
- Socket colour: light grey
-
Thread Size: 3/
8"- 18NPTF - Spanner Size: 24 mm
- for OE number: 6810428
- Manufacturer: MEAT&DORIA
- for OE number: 1 701 341
- Weight [kg]: 0.023
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Seerianumber: ECT-
FR- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: J4B,
J6A - Block Separation:
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA
- Takistus [oom]: 450
- valikuliselt:
- Pistikkontaktide arv: 2
- Installatsiooni sügavus (mm): 34
- Korpusevärv: must
-
Kaal (kg): 0,
045 - Rakendustüüp: elektriline
- alternatiivne remondikomplekt: 550038
- Manufacturer: ERA
- Pinge [V]: 12
- Piirangutega toode/piirangu info: ilma trossideta
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
03 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ESEN SKV
- Number of pins: 2
- Housing Colour: grey
-
Thread Size: 3/
8x18 NPTF - Manufacturer: FAE
- vajaminev tükihulk: 1
- Anduritüüp: Induktiivandur
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Manufacturer: FAST
- Voltage [V]: 12
- Number of pins: 2
- Housing Colour: white
-
Thread Size: 3/
8x18 NPTF - Manufacturer: FAE
-
Lambda andur: Sond,
Keere eelmääritud - Ühendus/klemm: vajadusel kohandada pistikühendus
- Ülekandeliinide arv: 4
- Installatsiooni pool: katalüsaatori ees
-
Seerianumber: ESL-
UV- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Lambda andur: Bistabiilne andur,
Keere eelmääritud -
Seerianumber: ESL-
UV- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Lambda Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 375
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
09 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ENERGY
- Engine Code: J6A
- Pressure from [kPA]: 10
- Pressure to [kPA]: 118
- Output Voltage, from [V]: 0.4
- Output Voltage, up to [V]: 4.7
- Manufacturer: FACET
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Lambda andur: Bistabiilne andur
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
12 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV121
- Lambda Sensor: Regulating Probe
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
08 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV096
- Manufacturer: ESEN SKV
- Construction Year from: 12.1991
-
Lambda Sensor: Regulating Probe,
Heated - Number of pins: 4
- Cable Length [mm]: 260
- for article number: 81048
- Manufacturer: MEAT&DORIA
- Lambda Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 375
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
09 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ESEN SKV
- Construction Year from: 01.1992
- Construction Year to: 12.1994
- Lambda andur: Sond
- Pinge [V]: 12
- Pikkus (mm): 375
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
12 - Takistus [oom]: 6
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
-
Engine Code: J6A,
JBE - Construction Year from: 01.1992
- Construction Year to: 12.1994
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986507
-
Engine Code: J6A,
JBE - Construction Year to: 12.1991
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986506
- Catalytic Converter Type: for vehicles with catalytic converter
- Construction Year from: 12.1992
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.1992
- Engine Code: J4B
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
- Connector Shape: triangular
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 2
- Cable Length [mm]: 110
- for OE number: 87SF 9B989 CA
- Manufacturer: MEAT&DORIA
Manufacturer: MAGNETI MARELLI
-
Engine Code: J6A,
JBE - Construction Year from: 01.1992
- Construction Year to: 09.1992
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 400
- Available as universal article as well, see article no.: 0258986507
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Lambda Sensor: Heated
- Length [mm]: 360
- Number of pins: 4
- Technical Information Number: Universal 77004
- Manufacturer: FAE
- Construction Year to: 12.1991
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated - Cable Length [mm]: 317
- Manufacturer: DELPHI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks