• for OE number: 4323633
• Spanner Size: 19
• Housing Colour: grey
• Manufacturer: KAMOKA

• Switch Pressure [bar]: 0.3
• Thread Size: 1/4x18 NPTF
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Engine Code: E5FA
• Pressure [bar]: 0.3
• Thread Size: 1/4-18NPT
• Spanner Size: 24
• Manufacturer: FACET

• Pressure [bar]: 0.3
• Thread Size: 1/4'' x 18 NPT
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Engine Code: E5FA
• Thread Size: 1/4 - 18NPT
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Spanner Size: 19
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0127
• Additional information: 21-0127

• for OE number: 1L2412A648BA
• for manufacturer number: 4080081
• Manufacturer: KAMOKA

• for OE number: 3936774
• Manufacturer: NRF

• Engine Code: E5FA
• Pressure [bar]: 0.3
• Thread Size: 1/4-18NPT
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

• Thread Size: 3/8x18 NPTF
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• for OE number: 88 11 374
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: 3/8 NPT
• for OE number: 3F1A12A648AA
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• for OE number: 1L2412A648BA
• Manufacturer: NRF

• Engine Code: E5FA
• Transmission Type: Automatic Transmission
• Mounting Type: Fitting
• Number of pins: 2
• Height [mm]: 51.8
• Supplementary Article/Info 2: with seal ring
• Thread Size: M12x1,5
• Housing Colour: blue
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: E5FA
• Inch Thread [inch]: 3/8-18NPT
• Thread Size: 3/818NPT
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: E5FA
• Inch Thread [inch]: 3/8-18NPT
• Thread Size: 3/818NPT
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: E5FA, E5FC
• Transmission Type: Automatic Transmission
• Block Separation:
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Thread Size: 3/8'' x 18 NPT
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: E5FA
• Transmission Type: Automatic Transmission
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Thread Size: 3/8" x 18 NPT
• Spanner Size: 19
• Number of pins: 2
• Colour Coding: white
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: E5FA
• Transmission Type: Automatic Transmission
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year to: 12.2005
• Colour: grey
• Shape: rectangular
• Housing Colour: grey
• Number of pins: 2
• Thread Size: NPT3/8
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Weight [kg]: 0.03
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Weight [kg]: 0.03
• Name: SW 50 92 4467
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Length [mm]: 54
• Number of connectors: 2
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 1S7Z6B288AA
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Laius (mm): 45
• Kõrgus (mm): 45
• Pikkus (mm): 75
• Kaal (g): 45
• Rakendustüüp: elektriline
• Korpuse materjal: Plastik
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Engine Code: E5FA, E5FC
• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Clockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 6854783
• Manufacturer: MEAT&DORIA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Resistor [Ohm]: 450
• Housing Colour: black
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of connectors: 2
• Weight [kg]: 0.03
• for OE number: 1 037 465
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Colour: grey
• Number of pins: 2
• Thread Size: 3/8x18 NPTF
• Manufacturer: FAE

• Housing Colour: grey
• Number of pins: 2
• Thread Size: NPT 3/8-18
• Spanner Size: 19
• Manufacturer: DELPHI

• Resistor [Ohm]: 450
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 34
• Housing Colour: black
• Weight [kg]: 0.045
• Operating Mode: Electric
• Alternative Repair Kit: 550038
• Manufacturer: ERA

• Engine Code: E5FA
• Resistor [Ohm]: 450
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 34
• Housing Colour: black
• Weight [kg]: 0.032
• Alternative Repair Kit: 550040
• Manufacturer: ERA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• for OE number: LR000442
• Manufacturer: MEAT&DORIA

• Height [mm]: 34
• Number of connectors: 2
• Required quantity: 1
• Resistor [Ohm]: 450
• Colour: black
• Operating Mode: Electric
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: E5FA
• Manufacturer: FACET

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: E5FA
• Manufacturer: FACET

• Engine Code: E5FA
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: E5FA
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 7009578
• Manufacturer: DELLO AUTOMEGA

• Engine Code: E5FA
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: rectangular
• Manufacturer: FAE

• Thread Size: 1/8'' x 27 NPT
• Number of pins: 2
• Manufacturer: ERA

• Required quantity: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: FAST

• Number of pins: 2
• Manufacturer: FAE

• Number of pins: 3
• Fitting Position: Throttle Housing
• Connector Shape: oval
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI
• Name: DE SS11000-12B1

• Engine Code: E5FA
• Resistor [Ohm]: 400
• Colour: black
• Number of pins: 2
• Fitting Depth [mm]: 37.5
• Weight [kg]: 0.02
• Manufacturer: ERA

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Engine Code: E5FA
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 550
• Manufacturer: VALEO
• Name: VA 253839

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Engine Code: E5FA, E5FC
• Oxygen Sensor: Oxygen Sensor
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Vehicle type: FT260S, FT280L, FT280M, FT280S, FT330L, FT330M, FT330S, FT350EL, FT350L, FT350M

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-FR-011
• Cable Length [mm]: 525
• Manufacturer: NTY

• Number of pins: 3
• Fitting Depth [mm]: 34
• Resistor M[ohm]: 1
• Manufacturer: ERA

• Length [mm]: 373
• Number of pins: 4
• Oxygen Sensor: Thread pre-greased
• Fabrication Number: ESL-FR-008
• Manufacturer: NTY

Lisainfo: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM Additional information: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 373
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV135
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Engine Code: E5FA
• Vehicle type: FT 300 S
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Engine Code: E5FA, E5FC
• Oxygen Sensor: Heated
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Vehicle type: FT260S, FT280L, FT280M, FT280S, FT330L, FT330M, FT330S, FT350EL, FT350L, FT350M

• Oxygen Sensor: Diagnostic Probe, Heated
• Number of pins: 4
• Cable Length [mm]: 670
• Quality: OE EQUIVALENT
• for OE number: 466016355004
• Manufacturer: MEAT&DORIA

• Resistor [Ohm]: 9
• Length [mm]: 400
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 400
• Oxygen Sensor: Heated
• Name: MM OSM099
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Connector Shape: round
• Cable Length [mm]: 330
• for OE number: 1327548
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Engine Code: E5FA
• Vehicle type: FT 300 S
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.085
• for OE number: 1 300 544
• Name: SW 33 10 3139
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: E5FA, E5FC
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Vehicle type: FT 260 S, FT 280 L, FT 280 M, FT 280 S, FT 330 L, FT 330 M, FT 330 S, FT 350 EL, FT 350 L, FT 350 M

• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe, Planar probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 750
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 1088851
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 450
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 128
• Manufacturer: DENSO
• Name: DN DOX-2004

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
FOCUS II KOMBI (DAW/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FOCUS II KOMBI (DAW/
(kvaliteediklass: Q)"