• Quantity per packing unit: 10
• Voltage [V]: 12
• Rated Power [W]: 21
• Lamp Type: PY21W
• Bulb Colour: Orange
• Socket Type bulb: BAU15s
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: both sides
• Supplementary Article/Supplementary Info: without bulb
• Lens Colour (direction indicator): amber
• Manufacturer: LOR

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass. Name: KIERUNKOWSKAZ FORD C-MAX, FIESTA V, FOCUS II, FUSION 11.01-12.12 PR/LE

• Fitting Position: both sides
• Supplementary Article/Supplementary Info: without bulb
• Lens Colour (direction indicator): white
• Manufacturer: LOR

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass. Name: KIERUNKOWSKAZ FORD C-MAX, FIESTA V, FOCUS II, FUSION 11.01-12.12 PR/LE

• Fitting Position: both sides
• Supplementary Article/Supplementary Info: without bulb
• Lens Colour (direction indicator): smoke grey
• Manufacturer: LOR

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass. Name: KIERUNKOWSKAZ FORD C-MAX, FIESTA V, FOCUS II, FUSION 11.01-12.12 PR/LE

• Construction Year to: 02.2008
• Fitting Position: lateral installation
• Registration Type: ECE approved
• Supplementary Article/Supplementary Info: without bulb holder
• Lens Colour: white
• Manufacturer: TYC
• Lisainfo: 18-0467-11-2 TYC
• Additional information: 18-0467-11-2 TYC

• Construction Year to: 02.2008
• Fitting Position: lateral installation
• Registration Type: ECE approved
• Supplementary Article/Supplementary Info: without bulb holder
• Lens Colour: yellow
• Manufacturer: TYC

• Fitting Position: both sides
• Colour: white
• Shape: oval
• Lens Colour (direction indicator): white
• Supplementary Article/Supplementary Info: without bulb holder, without bulb
• Registration Type: ECE approved
• Name: Suunatuli
• Manufacturer: DEP

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass.

• Name: Side indicator
• Quality class: PJ

Lisainfo: "Tootja: DEPO
FORD FIESTA, 02-
(kvaliteediklass: PJ)"

• Fitting Position: both sides, lateral installation
• Colour: transparent
• Registration Type: ECE approved
• Supplementary Article/Supplementary Info: without bulb holder
• Manufacturer: TYC

• Fitting Position: both sides
• Lamp Type: WY5W
• Supplementary Article/Supplementary Info: without bulb
• Housing Colour: chrome
• Lens Colour (direction indicator): Crystal clear
• Manufacturer: LOR

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass. Name: KIERUNKOWSKAZ FORD FIESTA V, FOCUS II, FUSION, SEAT IBIZA III,IV, EXEO, ALTEA 11.01-07.15 PR/LE

• Fitting Position: both sides
• Lamp Type: WY5W
• Supplementary Article/Supplementary Info: without bulb
• Lens Colour (direction indicator): smoke grey
• Housing Colour: chrome
• Manufacturer: LOR

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass. Name: KIERUNKOWSKAZ FORD FIESTA V, FOCUS II, FUSION, SEAT IBIZA III,IV, EXEO, ALTEA 11.01-07.15 PR/LE

• Construction Year from: 02.2008
• Fitting Position: Left Exterior Mirror
• Number of pins: 2
• General Information: QVP VERIFIED PRODUCTION by CZ
• Name: Suunatuli
• Manufacturer: AKA

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year from: 02.2008
• Fitting Position: Right Exterior Mirror
• Number of pins: 2
• General Information: QVP VERIFIED PRODUCTION by CZ
• Name: Suunatuli
• Manufacturer: AKA

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year from: 02.2008
• Fitting Position: Right Exterior Mirror
• Colour: white
• Registration Type: ECE approved
• Manufacturer: TYC

• Construction Year from: 02.2008
• Fitting Position: Left Exterior Mirror
• Colour: white
• Registration Type: ECE approved
• Manufacturer: TYC

• Quantity per packing unit: 2
• Fitting Position: Left Exterior Mirror, Right Exterior Mirror
• Lamp Type: LED
• Light Function: with dynamic indicator light
• Lens Colour (direction indicator): Crystal clear
• Quantity Unit: Pair
• Manufacturer: DEPO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass.

• Quantity per packing unit: 2
• Fitting Position: Left Exterior Mirror, Right Exterior Mirror
• Lamp Type: LED
• Light Function: with dynamic indicator light
• Lens Colour (direction indicator): smoke grey
• Quantity Unit: Pair
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Technical Information: Condensation on lights At high humidity or with significant changes in temperature, condensation may form on the lights. This internal condensation is a natural phenomenon when moist air condenses on the inside of the glass.

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Fitting Position: Left
• Operating Mode: Electric
• Light Function: with indicator
• Surface: primed
• Number of pins: 6
• Outer/Inner Mirror: Heatable, Aspherical
• Name: VŽLIPEEGEL
• Manufacturer: AKA

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Fitting Position: Right
• Operating Mode: Electric
• Light Function: with indicator
• Surface: primed
• Number of pins: 6
• Outer/Inner Mirror: Heatable, Aspherical
• Name: V„lipeegel
• Manufacturer: AKA

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Fitting Position: Right
• Operating Mode: Electric
• Light Function: with indicator
• Outer/Inner Mirror: Heatable, Aspherical
• Name: LUSTERKO FORD FOCUS II 01.08-12.11 PR
• Manufacturer: AKA

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Fitting Position: Left
• Operating Mode: Electric
• Light Function: with indicator
• Outer/Inner Mirror: Heatable, Aspherical
• Name: V„lipeegel
• Manufacturer: AKA

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year to: 02.2008
• Fitting Position: Right
• Light Function: with indicator
• Registration Type: ECE approved
• Surface: primed
• Outer/Inner Mirror: for electric mirror adjustment, Convex, Heatable
• Housing Colour: black
• Manufacturer: TYC OŒWIETLENIE

• Construction Year to: 02.2008
• Fitting Position: Left
• Light Function: with indicator
• Registration Type: ECE approved
• Surface: primed
• Outer/Inner Mirror: for electric mirror adjustment, Convex, Heatable
• Housing Colour: black
• Manufacturer: TYC OŒWIETLENIE

• Construction Year from: 02.2008
• Outer/Inner Mirror: Aspherical, Heatable
• Operating Mode: Electric
• Fitting Position: Right
• Light Function: with indicator
• Colour: black
• Number of pins: 6
• Manufacturer: ABAKUS LORO

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Outer/Inner Mirror: Aspherical, Heatable
• Operating Mode: Electric
• Fitting Position: Right
• Light Function: with indicator, with work light
• Model Year from: 2007
• Colour: black
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of pins: 7
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 02.2008
• Fitting Position: Left
• Light Function: with indicator
• Registration Type: ECE approved
• Surface: primed
• Manufacturer: TYC

Outer/Inner Mirror: Aspherical, Heatable, for electric mirror adjustment

• Construction Year from: 02.2008
• Fitting Position: Right
• Light Function: with indicator
• Registration Type: ECE approved
• Surface: primed
• Manufacturer: TYC

Outer/Inner Mirror: Aspherical, Heatable, for electric mirror adjustment

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Fitting Position: Right
• Operating Mode: Electric
• Light Function: with indicator
• Surface: primed
• Number of pins: 8
• Name: V„lipeegel
• Manufacturer: AKA

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Outer/Inner Mirror: Heatable, Electronically foldable, with Peripheral Lighting, Aspherical

• Outer/Inner Mirror: Convex, Heatable
• Operating Mode: Electric
• Fitting Position: Left
• Surface: primed
• Light Function: with indicator
• Model Year from: 2004
• Model Year to: 2007
• Colour: grey
• Manufacturer: ABAKUS

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Outer/Inner Mirror: Aspherical
• Operating Mode: Electric
• Fitting Position: Right
• Light Function: with indicator
• Colour: grey
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of pins: 5
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Outer/Inner Mirror: Aspherical, Heatable
• Operating Mode: Electric
• Fitting Position: Right
• Light Function: with indicator
• Colour: grey
• Number of pins: 6
• Manufacturer: ABAKUS

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 02.2008
• Construction Year to: 12.2011
• Outer/Inner Mirror: Aspherical, Heatable
• Operating Mode: Electric
• Fitting Position: Right
• Light Function: with indicator, with work light
• Colour: grey
• Number of pins: 8
• Manufacturer: ABAKUS

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.