• Engine Code: C30A4
• Manufacturer: KAVO

• Length [mm]: 41
• Spanner Size: 13
• Number of pins: 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 12
• Thread Size: 1/8
• for OE number: 553621201
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: MAGNETI MARELLI

• Engine Code: C30A4
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: 1/8 GAS
• Manufacturer: ERA

• Length [mm]: 41
• Spanner Size: 13
• Number of connectors: 1
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 41
• Spanner Size: 13
• Number of connectors: 1
• Weight [kg]: 0.02
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 1/8x28 BSPT
• Manufacturer: VERNET

• Mounting Type: Bolted, Plug-in connection
• Voltage [V]: 12
• Resistor [Ohm]: 628, 73
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107641
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M12 x 1,5
• Manufacturer: ERA

• Engine Code: C30A4
• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x1,5
• Manufacturer: FAE

• for OE number: 78410 SV4 003
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Number of mounting bores: 2
• Fabrication Number: ECP-HD-015
• Manufacturer: NTY

• Engine Code: C30A4
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Colour: white
• Corresponds to the original part in colour: white, black
• Supplementary Article/Supplementary Info: with seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 37870PJ7003
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Construction Year to: 12.1999
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Construction Year to: 12.1999
• Fitting Position: Right Front
• Thread Size: M18 x 1,5
• Socket colour: black
• Number of circuits: 4
• Connector Shape: angular
• Number of pins: 4
• Weight [kg]: 0.111
• for OE number: 36531-PK3-A05
• Cable Length [mm]: 460
• Length [mm]: 360
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.2000
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Finger probe
• Block Separation:
• Construction Year from: 01.1997
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: Front, before catalytic converter, after catalytic converter

• Construction Year from: 07.1997
• Construction Year to: 06.2001
• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Catalytic Converter Type: for vehicles with catalytic converter
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 650
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20063-12B1
• Additional information: ES20063-12B1 DEL
• Lisainfo: ES20063-12B1 DEL

• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 389
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20322-12B1
• Additional information: ES20322-12B1 DELPHI
• Lisainfo: ES20322-12B1 DELPHI

• Exhaust System: after catalytic converter
• Construction Year from: 09.1996
• Construction Year to: 09.1998
• Fitting Position: Right
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 425
• Number of connectors: 4
• Manufacturer: VERNET

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Manufacturer Restriction: MATSUSHITA
• Weight [kg]: 0.092
• Manufacturer: VEMO GERMANY

Transmission Type: 6-Speed Manual Transmission, 4-Speed Automatic Transmission, 5-Speed Manual Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: C30A4
• for model year: 1993
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 07.1997
• Construction Year to: 06.2001
• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Catalytic Converter Type: for vehicles with catalytic converter
• Exhaust System: for pre-catalytic converter
• for OE number: 36532-P5A-003
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 480
• Number of pins: 4
• Weight [g]: 106
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-1459

Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 06.2000
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, Front, before catalytic converter

• Construction Year from: 09.1994
• Fitting Position: Left
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: oval
• Socket colour: grey
• Number of circuits: 4
• Thread Size: M18 x 1,5
• Weight [kg]: 0.118
• Length [mm]: 670
• for OE number: 36531 P5M 004
• Cable Length [mm]: 580
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.