• for OE number: 893498203
• Fitting Position: Wheel Side
• Material: Rubber
• Weight [g]: 105
• Length [mm]: 98
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 82
• Name: IM 32351
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 82
• Height [mm]: 81
• for OE number: 431407283B
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8094
• Additional information: D8094 AUT
• Lisainfo: D8094 AUT

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) to: 89...J...351000
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 82
• Length [mm]: 98
• Thread Size: M20x1,5
• Material: NBR (nitrile butadiene rubber)
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 772018530

• Fitting Position: transmission sided
• Length [mm]: 111
• Supplementary Article/Info 2: with cap, with clamps
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 100
• Fabrication Number: NOP-008
• Manufacturer: NTY

• for OE number: 803407283B
• Fitting Position: transmission sided
• Material: Rubber
• Weight [g]: 186
• Supplementary Article/Info 2: with flange
• Length [mm]: 97
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 94
• Name: IM 30219
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 82
• Height [mm]: 81
• Version: ELASTIC
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8094E

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 83
• Height [mm]: 75
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8373

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 91
• Height [mm]: 88
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8132

• Transmission Type: Automatic Transmission
• Fitting Position: transmission sided, Front Axle Left
• Length [mm]: 83
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 80
• Manufacturer: JPN

• Fitting Position: inner
• General Information: Dust cover for inner joint
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: Manual Transmission
• Rim Size [inch]: 15.0
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 83
• Height [mm]: 102
• Thread Size: M14x1.5x73
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO
• Lisainfo: C300314
• Additional information: C300314

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Vehicle Identification Number (VIN) from: 8A-L-360 001
• Engine Code: NG
• Fitting Position: Rear Axle, Wheel Side
• Height [mm]: 83
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 75
• Manufacturer: SKF PRZEGUBY POLOSIE OSLONY

• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 100
• Height [mm]: 118
• Joint Type: Flexible Joint Disc
• Bellows Material: Rubber/Metal
• Lisainfo: Bellow Set, drive shaft
• Additional information: Bellow Set, drive shaft

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Version: Six
• Length [mm]: 79
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 76.5
• Inner Diameter 2 [mm]: 19
• Manufacturer: GSP

• Fitting Position: transmission sided
• Length [mm]: 100
• Supplementary Article/Info 2: with cap, with clamps
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 94
• Fabrication Number: NOP-010
• Manufacturer: NTY

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Version: Two
• Length [mm]: 96.5
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 82.5
• Inner Diameter 2 [mm]: 21.3
• Manufacturer: GSP

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 94
• Height [mm]: 99
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 78
• Height [mm]: 110
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8168T

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 99
• Height [mm]: 90
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8033

• Transmission Type: Automatic Transmission
• Fitting Position: transmission sided, Front Axle Left
• Length [mm]: 83
• Material: Rubber
• Supplementary Article/Supplementary Info: with grease
• Supplementary Article/Info 2: with clamps
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 80
• Weight [kg]: 0.071
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 38331 FEBI
• Additional information: 38331 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Version: Seven
• Length [mm]: 77
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 48.5
• Inner Diameter 2 [mm]: 20.5
• Manufacturer: GSP

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right

• Vehicle Identification Number (VIN) to: ******8C*P*300000
• Fitting Position: Rear Axle, Wheel Side
• Length [mm]: 79
• Material: Rubber
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 79
• Weight [kg]: 0.333
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 110
• Weight [kg]: 0.38
• Material: Rubber
• Weight [g]: 380
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 100
• Manufacturer: METALCAUCHO

Fitting Position: transmission sided, Rear Axle both sides, Front Axle both sides

• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) to: 8C-P-300000
• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 76
• Height [mm]: 84
• Thread Size: M14x1.5x73
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 99
• Height [mm]: 100
• Name: SE D8061
• Manufacturer: AUTOFREN SEINSA

• Length [mm]: 130
• Inner Diameter [mm]: 62
• Outer Diameter [mm]: 94, 86, 78, 66, 38, 32, 28, 24
• Material: Rubber
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.27
• Inner Diameter 3 [mm]: 74
• Supplementary Article/Info 2: with clamps
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side, Front Axle Right, Front Axle Left
• Inner Diameter 2 [mm]: 77
• Height [mm]: 132
• Manufacturer: SNR /NTN-SNR/
• Name: SN OBK10.001

• Transmission Type: Manual Transmission
• Length [mm]: 93
• Material: Polychloroprene (Neoprene)
• for OE number: 191498201
• Inner Diameter 1 [mm]: 52.9
• Inner Diameter 2 [mm]: 21
• Manufacturer: GSP

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right

• Fitting Position: Rear Axle, transmission sided
• Vehicle Identification Number (VIN) to: 8C...P...300000
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 94
• Length [mm]: 108
• Material: Thermoplast
• Supplementary Article/Info 2: with flange
• SVHC: No SVHC present!
• Manufacturer: FAG-PRZEGUBY I POLOSIE

• Fitting Position: Wheel Side, Front Axle
• Height [mm]: 146
• Joint Type: Universal Joint
• Supplementary Article/Info 2: with clamps
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 86
• Manufacturer: SKF
• Name: SK VKJP01001

Lisainfo: VKJP 01001 SKF Kõrgus [mm]: 132 Siseläbimõõt 1 [mm]: 20 Siseläbimõõt 2 [mm]: 81 Additional information: VKJP 01001 SKF Kõrgus [mm]: 132 Siseläbimõõt 1 [mm]: 20 Siseläbimõõt 2 [mm]: 81

• Vehicle Identification Number (VIN) to: ******8C*P*300000
• Fitting Position: transmission sided, Rear Axle
• Length [mm]: 109
• Material: Rubber
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 94
• Weight [kg]: 0.43
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 52.9
• Height [mm]: 93
• Manufacturer: SNR /NTN-SNR/
• Name: SN IBK54.004

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Inner Diameter 1 [mm]: 21.3
• Inner Diameter 2 [mm]: 82.5
• Height [mm]: 96.5
• Fitting Position: Wheel Side
• Manufacturer: SNR

• Vehicle Identification Number (VIN) to: 8C-P-300000
• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 94
• Height [mm]: 100
• Supplementary Article/Info 2: with cap
• Joint Type: Flexible Joint Disc
• Bore Diameter [mm]: 8.6
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 78
• Bellows Material: Rubber/Metal
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 from [mm]: 20
• Inner Diameter 1 to [mm]: 24
• Inner Diameter 2 from [mm]: 81
• Inner Diameter 2 to [mm]: 93
• Height [mm]: 110
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN LOBRO
• Additional information: 190975
• Lisainfo: 190975

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Inner Diameter 1 from [mm]: 19
• Inner Diameter 1 to [mm]: 23
• Inner Diameter 2 from [mm]: 69
• Inner Diameter 2 to [mm]: 79
• Height [mm]: 100
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

Fitting Position: Wheel Side, Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• for OE number: 893498201
• Fitting Position: transmission sided
• Material: Rubber
• Weight [g]: 199
• Length [mm]: 110
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 100
• Name: IM 30701
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 72
• Height [mm]: 97
• Name: SN OBK10.005
• Manufacturer: SNR

• Length [mm]: 126
• Outer Diameter [mm]: 21, 60, 72, 82, 83
• Material: Rubber
• Fitting Position: Front Axle, Rear Axle
• Height [mm]: 126
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with clamps
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 27730 FEBI
• Additional information: 27730 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side, Front Axle
• Height [mm]: 146
• Joint Type: Universal Joint
• Supplementary Article/Info 2: with clamps
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 86
• Manufacturer: SKF PRZEGUBY POLOSIE OSLONY

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 108
• Height [mm]: 120
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8076

• Fitting Position: Rear Axle, transmission sided
• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 8C-R-000001
• Height [mm]: 110
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 100
• Material: Rubber
• Manufacturer: JP GROUP
• Lisainfo: Axle boot kit, front, inner, left
• Additional information: Axle boot kit, front, inner, left

• Fitting Position: Wheel Side, Front Axle
• Rim Size [inch]: 15.0
• Length [mm]: 88
• Material: Rubber
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 80
• Weight [kg]: 0.435
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: Manual Transmission
• Rim Size [inch]: 16.0
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 83
• Height [mm]: 102
• Thread Size: M16x1.5x77
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Vehicle Identification Number (VIN) to: 8C-N-140 000
• Engine Code: NG
• Fitting Position: Wheel Side, Front Axle
• Rim Size [inch]: 15.0
• Height [mm]: 98
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 82
• Manufacturer: SKF
• Name: SK VKJP3137

• Transmission Type: Automatic Transmission
• Fitting Position: Wheel Side, Front Axle Right
• Length [mm]: 82
• Material: Rubber
• Inner Diameter 1 [mm]: 22
• Weight [kg]: 0.421
• Inner Diameter 2 [mm]: 83
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8C-R-000001
• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 100
• Height [mm]: 111
• Supplementary Article/Info 2: with cap
• Joint Type: Flexible Joint Disc
• Bore Diameter [mm]: 8.7
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: Rubber/Metal
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Model Year from: 1992
• Fitting Position: transmission sided
• Length [mm]: 122
• Weight [kg]: 0.4
• Material: NBR (nitrile butadiene rubber)
• Joint Type: CV Joint
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 108
• Packaging length [cm]: 12
• Packaging width [cm]: 11
• Packaging height [cm]: 11
• Manufacturer: FEBEST

• Fitting Position: Wheel Side, Front Axle
• Inner Diameter 1 from [mm]: 22
• Inner Diameter 1 to [mm]: 29
• Inner Diameter 2 from [mm]: 72
• Inner Diameter 2 to [mm]: 84
• Height [mm]: 97
• Material: Rubber
• Joint Type: Universal Joint
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 72
• Manufacturer: SKF
• Name: SK VKJP01013
• Lisainfo: VKJP 01013 SKF
• Additional information: VKJP 01013 SKF

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 114
• Material: Rubber
• Inner Diameter 1 [mm]: 28
• Weight [kg]: 0.486
• Inner Diameter 2 [mm]: 100
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: transmission sided, Rear Axle
• Model Year from: 1995
• Model Year to: 1995
• for model year: 1995
• not for model year: 1995
• Length [mm]: 116
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Manufacturer: JPN

• Fitting Position: transmission sided
• General Information: Dust cover for inner joint
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) from: 8C-R-000001
• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 82
• Height [mm]: 76
• Thread Size: M14x1.5x73
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Rear Axle, transmission sided
• Vehicle Identification Number (VIN) from: 8C...R...000001
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Length [mm]: 115
• Material: Thermoplast
• Supplementary Article/Info 2: with flange
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 772025030

• Vehicle Identification Number (VIN) from: ******8C*R*000001
• Fitting Position: transmission sided, Rear Axle
• Length [mm]: 120
• Material: Rubber
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 100
• Weight [kg]: 0.45
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 100
• Height [mm]: 118
• Supplementary Article/Info 2: with cap
• Joint Type: Flexible Joint Disc
• Bore Diameter [mm]: 8.8
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Thread Size: M8x1.5x47
• Bellows Material: Rubber/Metal
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: transmission sided, Rear Axle
• Model Year from: 1995
• Length [mm]: 116
• Material: Rubber
• Inner Diameter 1 [mm]: 27
• Weight [kg]: 0.127
• Inner Diameter 2 [mm]: 100
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: NG
• Fitting Position: Front Axle, transmission sided
• Height [mm]: 120
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Inner Diameter 1 [mm]: 36
• Inner Diameter 2 [mm]: 100
• Manufacturer: SKF
• Name: SK VKJP6004

• Engine Code: NG
• Height [mm]: 120
• Inner Diameter 1 [mm]: 36
• Inner Diameter 2 [mm]: 100
• Length [mm]: 120
• Fitting Position: transmission sided, Front Axle
• Slim Set:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Outer Diameter [mm]: 27, 75, 92, 100, 108, 116
• Material: Rubber
• Fitting Position: Front Axle, Rear Axle
• Height [mm]: 151
• Weight [kg]: 0.23
• Supplementary Article/Info 2: with clamps
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter 2 [mm]: 77
• Height [mm]: 132
• Quantity: 12
• Fitting Position: Wheel Side, Front Axle Right, Front Axle Left
• Manufacturer: SNR /NTN-SNR/
• Name: SN OBK10.003