• Fitting Position: Front Axle, Lower, Front, Rear
• Control/Trailing Arm Type: Control Arm
• Required quantity: 4
• Mounting Type: Rubber-Metal Mount
• Lisainfo: AUDI, VOLKSWAGEN
• Additional information: AUDI, VOLKSWAGEN

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 22
• Width [mm]: 37
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Material: Rubber/Metal
• Thickness [mm]: 46
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 39
• Manufacturer: MERTZ

• Vehicle configuration line / variant: EXC. 2.2 - 2.8
• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Vehicle Equipment: for vehicles with power steering

Lisainfo: Rubber mount for wishbone, front, models with power steering Additional information: Rubber mount for wishbone, front, models with power steering

• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, inner
• for OE number: 8A0407181
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37
• Width [mm]: 44
• Manufacturer: DELLO AUTOMEGA

• Quantity per packing unit: 4
• Fitting Position: Lower Front Axle
• Height [mm]: 44
• Weight [kg]: 0.15
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37.5
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 150
• Manufacturer: METALCAUCHO

• Quantity per packing unit: 2
• Fitting Position: Lower Front Axle
• Height [mm]: 44
• Weight [kg]: 0.12
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Vehicle Equipment: for vehicles without power steering
• Weight [g]: 120
• Manufacturer: METALCAUCHO

• Fitting Position: Rear, Front, Rear Axle, both sides
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A80/PASS
• Manufacturer: MAX

• Construction Year to: 12.1992
• Fitting Position: Front Axle, Front, Rear, Left, Right, Lower
• Alternatively:
• Total Length [mm]: 44
• Outer Diameter [mm]: 48, 37.4
• Inner Diameter [mm]: 10.1
• Weight [kg]: 0.14
• Manufacturer: CORTECO
• Name: COC 21652145

• Fitting Position: Front Axle, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37.4
• Width [mm]: 44
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 44
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 10
• Material: Rubber/Metal
• Weight [kg]: 0.15
• Name: DY 37-06032-5
• Manufacturer: DYS

• Material: Rubber/Metal
• Length from [mm]: 44
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37
• Name: Control arm bush left=right
• Quality class: PJ

Fitting Position: Front Axle, Lower, Front Axle Left, Front Axle Right Lisainfo: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"

• Construction Year to: 12.1992
• Fitting Position: Front Axle, Front, Rear, Right, Left
• Alternatively:
• Weight [kg]: 0.15
• Manufacturer: CORTECO
• Name: COC 21652524

• Vehicle Identification Number (VIN) from: 8CR125001
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 38
• Thickness 1 [mm]: 44
• Manufacturer: DELPHI
• Name: DE TD463W

Fitting Position: Front Axle, inner, in front of axle, behind the axle, Lower

• new version:
• Length [mm]: 44
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.12
• Name: Puks - K„„ndmik VW P. A80/PASSAT (ZE WSPOM.)
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Lower, Front, Front Axle both sides
• Required quantity: 4
• paired article number: VKDS 331010
• Manufacturer: SKF
• Name: SK VKDS331010

• Quantity: 4
• Fitting Position: Front Axle both sides
• General Information: Bush for wishbone arm
• Manufacturer: VIKA

• new version:
• Length [mm]: 44
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.12
• Name: SW 30 60 0036
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle configuration line / variant: EXC. 2.2 - 2.8
• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 44
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37.5
• Supplementary Article/Supplementary Info: without holder
• Vehicle Equipment: for vehicles with power steering
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. Name: Puks - K„„ndmik VW P. A80/PASSAT HD (ZE WSPOM.) KONIERZ 55MM

• Fitting Position: Front Axle Right, Lower, inner, Front Axle Left
• Height [mm]: 44
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 37
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Quantity per axle: 2
• Replace in pairs only:
• Manufacturer: MEY

General Information: Reinforced rubber bushing with guaranteed longer lifetime Name: Puks - K„„ndmik VW P. A80/PASSAT HD (ZE WSPOM.) KONIERZ 48MM

• Fitting Position: Rear Axle Lower
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount for wishbone, rear
• Additional information: Rubber mount for wishbone, rear

• Vehicle configuration line / variant: EXC. 2.2 - 2.8
• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"

• Fitting Position: Lower Front Axle
• for OE number: 8A0 407 181
• Manufacturer: GSP

• Thickness [mm]: 26
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44, 52
• Material: Rubber/Metal
• Fitting Position: Rear Axle Lower, Front
• Weight [kg]: 0.134
• Name: Puks - K„„ndmik VW T. A80 92-9
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: inner, Front, Rear Axle Right, Rear Axle Left
• Height [mm]: 25
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW T. A80 92-9
• Manufacturer: MEY

• Fitting Position: Rear, Front, Rear Axle, both sides
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A80/PASSAT (ZE WSPOM.)
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Outer Diameter [mm]: 37.5
• Required quantity: 2
• Fitting Position: both sides, Upper, outer, Rear Axle
• Weight [kg]: 0.225
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik VW T. A4 QUATTRO
• Manufacturer: TED

• Vehicle Identification Number (VIN) from: 8C-N-230 001
• Fitting Position: Rear, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331072
• Inner Diameter [mm]: 20
• Outer Diameter [mm]: 37.5
• Name: SK VKDS331072
• Manufacturer: SKF

• Inner Diameter [mm]: 12
• Fitting Position: Rear, Rear Axle
• Name: Hlss, ootshoova kinnitus
• Manufacturer: MAX

• Fitting Position: Rear Axle Lower
• Mounting Type: Rubber-Metal Mount
• Thickness [mm]: 58
• Outer Diameter [mm]: 58, 21
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik VW T. A100/200 QUA
• Manufacturer: MAX

• Inner Diameter [mm]: 10.2
• Outer Diameter [mm]: 44.5
• Length [mm]: 44
• paired article number: 270025
• Weight [kg]: 0.21
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

Fitting Position: in front of axle, behind the axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Braking/Driving Dynamics: for vehicles with ABS
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 58.2
• Length [mm]: 58
• paired article number: 270031
• Weight [kg]: 0.4
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 58.3
• Weight [kg]: 0.33
• Fitting Position: Rear, Rear Axle
• Name:
• Manufacturer: TED

• Required quantity: 4, 2
• Fitting Position: Rear, Lower, Front, both sides, Front Axle
• Supplementary Article/Info 2: with grease cap
• Weight [kg]: 0.162
• Colour: red
• Inner Diameter [mm]: 10
• Shore-A hardness value, base body: 80
• Outer Diameter [mm]: 38
• Material: PU (Polyurethane)
• Name: PUKS
• Manufacturer: TED

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Length [mm]: 44
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 54
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Thickness [mm]: 58
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 58, 21
• Fitting Position: Rear Axle Lower
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.34
• Name: Puks - K„„ndmik VW T. A100/200 QUA
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear
• Control/Trailing Arm Type: for trailing arm
• Mounting Type: Rubber-Metal Mount
• Height [mm]: 58
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 58
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: outer, Upper, Rear Axle Right, Rear Axle Left
• Height [mm]: 55
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW T. A80/A4 QUATTRO
• Manufacturer: MEY

• Height [mm]: 55
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Mounting Type: Rubber-Metal Mount
• Fitting Position: both sides, Rear Axle
• Axle alignment required after fitting:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.