Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Name: Radiator
- Quality class: P
Lisainfo: A4 (kvaliteediklass PJ)
- Fitting Position: Main Expansion Tank
- Quantity per packing unit: 25
- Inner Diameter [mm]: 28.3
- Outer Diameter [mm]: 32.1
- Thickness [mm]: 3.9
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year from: 09.2014
- Construction Year to: 09.2018
- Core Depth [mm]: 26
- Core Length [mm]: 178
- Core Width [mm]: 197
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Technical Information: auxiliary radiator
- Quality class: PJ
- Name: Radiator
- Core Length [mm]: 720
- Core Width [mm]: 132
- Core Depth [mm]: 55
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Assy./disassy. by qualified personnel required!:
-
Name: AB 003-
017- 0058 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Core Length [mm]: 720
- Core Width [mm]: 468
- Core Depth [mm]: 32
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 470
- Core Width [mm]: 720
- Core Depth [mm]: 36
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: MAX
- Lisainfo: AC266808
- Additional information: AC266808
- Radiator type: Brazed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Manufacturer: KAMOKA
- Fitting Position: Centre
- Cooling fins material: Aluminium
- Core Depth [mm]: 52
- Core Length [mm]: 720
- Core Width [mm]: 134
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Fitting Position: Centre
- Heating/Cooling: Auxiliary Radiator
- Core Length [mm]: 720
- Core Width [mm]: 133
- Core Depth [mm]: 55
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
kivitusaku - Manufacturer: NRF
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 720*474*36
- Additional information: 720*474*36
-
Heating/Cooling: Auxiliary Fan,
for vehicles with auxiliary cooler - Climate Zones: for hot climate zones
- Radiator type: Brazed cooling fins
- Core Length [mm]: 195
- Core Width [mm]: 189
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging width [cm]: 16
- Packaging height [cm]: 26
- Packaging length [cm]: 38.5
- Net Weight [g]: 803
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Climate Zones: for hot climate zones
- Fitting Position: Left
- Core Length [mm]: 195
- Core Width [mm]: 190
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Weight [kg]: 1.8
- Packaging length [cm]: 39
- Packaging width [cm]: 26
- Packaging height [cm]: 16
- for OE number: 4G0121212
- Engine Code: CRTD
- Core Length [mm]: 720
- Core Width [mm]: 468
- Core Depth [mm]: 34
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1618
- Manufacturer: MAGNETI MARELLI
- Vehicle Equipment: for vehicles with air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: with cap,
without expansion tank -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
-
Name: Radiaator,
mootorijahutus - Manufacturer: NIS
-
Lisainfo: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI -
Additional information: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI
- Vehicle Equipment: for vehicles with air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 36
- Core Length [mm]: 720
- Core Width [mm]: 468
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- Core Length [mm]: 720
- Core Width [mm]: 469
- Core Depth [mm]: 38
- for OE number: 8K0121251H
-
Weight [g]: 4,
620 -
Gross Weight [g]: 6,
300 -
alternative item: -
- Manufacturer: DENSO
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Packaging width [cm]: 19
-
Net Weight [g]: 4,
840 - Packaging height [cm]: 62.5
- Packaging length [cm]: 99
- Name: MH CR911000P
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Transmission Type: Automatic Transmission
- Packaging width [cm]: 19
-
Net Weight [g]: 5,
104 - Packaging height [cm]: 63
- Packaging length [cm]: 99.5
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES
A4
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks