Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Manufacturer: TOPRAN HANS PRIES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 650
- Core Width [mm]: 449
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Name: NI 65341
- Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN PASSAT B8
(3G2, 3G5) (14- ) 2.0 TDI -
Additional information: VOLKSWAGEN PASSAT B8
(3G2, 3G5) (14- ) 2.0 TDI
Technical Information: Radiator with 5mm system-Advanced technology with higher power effect
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Model Year to: 2016
-
for PR number: 8Z6,
8Z9 - Core Length [mm]: 650
- Core Width [mm]: 453
- Core Depth [mm]: 23
- Number of connectors: 2
- Cooling fins material: Aluminium
-
Water Tank Material (radiator): Polyamid 6.6,
GRP (Glass fibre Reinforced Plastic) -
Supplementary Article/Supplementary Info: without gasket/
seal - Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Radiaatori tüüp: Jahutusribid joodetud
- Netopikkus [mm]: 650
- Netolaius [mm]: 416
- Netosügavus [mm]: 23
- Manufacturer: JPN
- Construction Year to: 08.2016
- Engine Code: CUNA
-
Transmission Type: 6-
Speed Manual Transmission - Core Width [mm]: 650
- Core Length [mm]: 415
- Core Depth [mm]: 23
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Inlet Ø [mm]: 33
- Outlet Ø [mm]: 33
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: without coolant regulator
- Weight [kg]: 4
- Name: VA 701129
- Manufacturer: VALEO
- Heating/Cooling: Auxiliary Radiator
- Material: Aluminium
- Core Length [mm]: 620
- Core Width [mm]: 410
- Core Depth [mm]: 24
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: NRF
- Heating/Cooling: Auxiliary Radiator
- Core Length [mm]: 620
- Core Width [mm]: 410
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Netosügavus [mm]: 0
- Netopikkus [mm]: 0
- Netolaius [mm]: 0
- Pealispind: tinutatud
- Üldine informatsioon: radiator; lead welding
- Manufacturer: VIKA
- Core Width [mm]: 448
- Core Length [mm]: 650
- Core Depth [mm]: 24
- Material: Aluminium
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.25
- Name: VA 735559
- Manufacturer: VALEO
Heating/Cooling: Auxiliary Radiator, for vehicles without oil cooler
- Netosügavus [mm]: 0
- Netopikkus [mm]: 0
- Netolaius [mm]: 0
- Üldine informatsioon: charge air cooler
- Manufacturer: VIKA
- Engine Code: CUNA
-
Transmission Type: 6-
Speed Manual Transmission - Core Width [mm]: 388
- Core Length [mm]: 620
- Core Depth [mm]: 16
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Inlet Ø [mm]: 22
- Outlet Ø [mm]: 22
- Heating/Cooling: for vehicles without oil cooler
-
Supplementary Article/Info 2: without coolant regulator,
without cap - Radiator type: Brazed cooling fins
- Weight [kg]: 3.82
- Manufacturer: VALEO
Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 449
- Core Depth [mm]: 34
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Core Length [mm]: 650
- Core Width [mm]: 449
- Core Depth [mm]: 34
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 14
- Packaging width [cm]: 54
- Packaging height [cm]: 84
- for OE number: 5Q0121251EN
- Weight [kg]: 4.38
- Manufacturer: AKSDASIS
- Weight [g]: 820
- Core Length [mm]: 620
- Core Width [mm]: 391
- Core Depth [mm]: 18
-
Gross Weight [g]: 2,
500 - Manufacturer: DENSO
- Name: DN DRM02018
-
Engine Code: CUNA,
DGCA -
Transmission Type: 6-
Speed Manual Transmission - Core Width [mm]: 449
- Core Length [mm]: 650
- Core Depth [mm]: 34
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Inlet Ø [mm]: 26
- Outlet Ø [mm]: 26
- Heating/Cooling: for vehicles without oil cooler
- Radiator type: Brazed cooling fins
- Weight [kg]: 5.49
- Name: VA 735549
- Manufacturer: VALEO
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 650
- Core Width [mm]: 449
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Weight [g]: 1,
880 - Core Length [mm]: 650
- Core Width [mm]: 420
- Core Depth [mm]: 27
-
Gross Weight [g]: 3,
560 - Name: DN DRM32048
- Manufacturer: DENSO
- Radiator type: Brazed cooling fins
- Core Length [mm]: 620
- Core Width [mm]: 408
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging height [cm]: 15
-
Net Weight [g]: 3,
488 - Packaging width [cm]: 57
- Packaging length [cm]: 86
- Name: MH CR959000S
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 620
- Core Width [mm]: 420
- Core Depth [mm]: 28
- Water Tank Material (radiator): Plastic
- Inlet Ø [mm]: 22
- Outlet Ø [mm]: 22
- Climate Zones: for tropical climate zones
- Manufacturer: MAHLE
- Vehicle Equipment: for vehicles with trailer hitch
- Packaging height [cm]: 15.2
-
Net Weight [g]: 2,
595 - Packaging width [cm]: 47
- Packaging length [cm]: 94
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks