• Vehicle Equipment: for vehicles with direct shift transmission
• Transmission Type: Dual-Clutch Transmission
• Filter type: Filter Insert
• Lisainfo: Hydraulic filter, gearbox, 6 speed aut.
• Additional information: Hydraulic filter, gearbox, 6 speed aut.

• Filter type: Filter Insert
• for OE number: AM 325 433 D
• Manufacturer: KAMOKA

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 47
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 30
• Weight [kg]: 0.012
• Manufacturer: FEBI
• Additional information: F171347
• Lisainfo: F171347

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Inner Diameter [mm]: 10
• Height [mm]: 47
• Outer Diameter [mm]: 30
• Weight [kg]: 0.012
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Inner Diameter [mm]: 10
• Height [mm]: 47
• Outer Diameter [mm]: 30
• Weight [kg]: 0.012
• Name: SW 33 10 0855
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 106
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-012
• Manufacturer: NTY
• Name: NTY FSF-AU-012

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Transmission Type: for 7-speed dual-clutch transmission
• Transmission Code: DQ200 (DSG7)
• Filter type: Filter Insert
• Height [mm]: 47
• Outer Diameter [mm]: 30
• Inner Diameter [mm]: 10
• Manufacturer: PURFLUX

• Transmission Code: DSG6 (DQ250)
• Filter type: Filter Insert
• Height [mm]: 105
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 55
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Transmission Type: 6-Speed Dual-Clutch Transmission
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Filter type: Filter Insert
• Weight [kg]: 0.022
• for OE number: 0AM 325 433 E
• Height [mm]: 47
• Outer Diameter [mm]: 30
• Manufacturer: DENCKERMANN FILTRY

• Transmission Type: for 6-speed dual-clutch transmission
• Transmission Code: DQ250 (DSG6)
• Filter type: Filter Insert
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Inner Diameter [mm]: 29
• Manufacturer: PURFLUX

• Filter type: Filter Insert
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Diameter [mm]: 58
• Height [mm]: 106
• Inner Diameter [mm]: 17
• Transmission Type: Automatic Transmission
• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• for OE number: 02E 398 051
• Transmission Code: DQ250/02E
• Consult accessories list for recommended additional repairs:
• Observe system fill quantity:
• Shape: Cylindrical
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Code: DSG 7G (0DL)
• Transmission Type: Automatic Transmission
• Length [mm]: 136
• Weight [kg]: 0.082
• for OE number: 0BH 325 183 B
• Outer Diameter [mm]: 53
• Filter type: Filter Insert
• Manufacturer: DENCKERMANN FILTRY

• Transmission Code: DSG6 (DQ250)
• Filter type: Filter Insert
• Outer Diameter [mm]: 58
• Inner Diameter [mm]: 29
• Height [mm]: 106
• Manufacturer: HENGST FILTRY

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105.4
• Outer Diameter [mm]: 58, 56
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI
• Additional information: FE44176
• Lisainfo: FE44176

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105
• Outer Diameter [mm]: 58, 56
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• for OE number: GC 325 183
• Manufacturer: KAMOKA

• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• for OE number: 0GC 325 183 A
• Manufacturer: ASHIKA-FILTRY

• Filter type: Suction Filter
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fabrication Number: FSF-VW-018
• Manufacturer: NTY

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Transmission Code: DSG7 (DQ381)
• Weight [kg]: 0.104
• Height [mm]: 136
• Outer Diameter [mm]: 58
• Filter type: Filter Insert
• Outer Diameter 1 [mm]: 54
• Manufacturer: DENCKERMANN FILTRY

• Transmission Code: DSG6 (DQ250)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 105
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 55
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Diameter [mm]: 58.1
• Height [mm]: 106.1
• Inner Diameter 2 [mm]: 17
• Packaging height [cm]: 13.1
• Packaging width [cm]: 7
• Packaging length [cm]: 7
• Net Weight [g]: 74
• Manufacturer: MAHLE KNECHT

• Transmission Type: for 6-speed dual-clutch transmission
• Transmission Code: DQ400E (DSG6)
• Filter type: Filter Insert
• Height [mm]: 136
• Outer Diameter [mm]: 54
• Inner Diameter [mm]: 17
• Manufacturer: PURFLUX

• Filter type: Filter Insert
• Fitting Position: Left
• General Information: gearbox filter element
• Manufacturer: BORSEHUNG

• Filter type: Filter Insert
• Fabrication Number: FSF-VW-028
• Transmission Code: 02E
• Manufacturer: NTY

• Transmission Code: DSG7 (DQ381)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 136
• Outer Diameter [mm]: 58
• Outer Diameter 1 [mm]: 54
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Transmission Code: 02E, 0D9, DQ250
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Filter type: Filter Insert
• Vehicle Equipment: for vehicles with direct shift transmission
• Weight [kg]: 0.1
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Lisainfo: V10-0440 VAI
• Additional information: V10-0440 VAI

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Transmission Code: 0GC, DQ381
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles with power steering
• Filter type: In-Line Filter
• Specification: Magnetfilter
• Diameter [mm]: 10
• Fitting Position: from steering gear to fluid reservoir
• Manufacturer: AIC
• Lisainfo: 55266 AIC
• Additional information: 55266 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Code: 02E, 0D9, DQ250
• Outer Diameter [mm]: 58
• Height [mm]: 106
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.111
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: DSG 7G (0DL)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 136
• Outer Diameter [mm]: 58
• Outer Diameter 1 [mm]: 54
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Filter type: Filter Insert
• Diameter [mm]: 54
• Height [mm]: 137
• Inner Diameter 2 [mm]: 17
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Fibre Composite
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: 0GC, DQ381
• Packaging height [cm]: 14.5
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Net Weight [g]: 80
• Name: KN HX190D
• Manufacturer: KNECHT

• Engine Code: DCYA, CRBC
• Transmission ID: DQ400E, DQ381
• Block Separation:
• Filter type: Filter Insert
• Inner Diameter [mm]: 18
• Height [mm]: 137
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

Transmission Type: 6-Speed Dual-Clutch Transmission, 7-Speed Dual-Clutch Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Vehicle Identification Number (VIN) from: 8V-H-000001, FF-H-000001
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• for OE number: 0GC 325 183A
• Observe system fill quantity:
• Shape: Cylindrical
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DCYA, CRBC
• Transmission ID: DQ400E, DQ381
• Block Separation:
• Filter type: Filter Insert
• Inner Diameter [mm]: 18
• Height [mm]: 137
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 10 7342
• Manufacturer: SWAG

Transmission Type: 6-Speed Dual-Clutch Transmission, 7-Speed Dual-Clutch Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2017
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: 0GC, DQ381
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: DQ250
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: DQ250
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Transmission Code: DQ250
• Transmission Type: 6-Speed Dual-Clutch Transmission
• Vehicle Equipment: for vehicles with direct shift transmission
• Model Year from: 2005
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Filter type: Pre-Filter
• Transmission Code: DQ250
• Length [mm]: 235
• Width [mm]: 162
• Height [mm]: 37
• Manufacturer: HENGST FILTRY

• Engine Code: CRBC, CRLB, DBGA, DCYA, DEJA, CRUA
• Block Separation:
• Filter type: Screen Filter
• Length [mm]: 235
• Width [mm]: 165
• Height [mm]: 65
• Weight [kg]: 0.25
• Manufacturer: FEBI-FILTRY

Transmission Type: 6-Speed Dual-Clutch Transmission, 6-Speed Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• See accessories list for additionally required parts:
• Transmission Code: 0GC, DQ381
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.129
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Transmission Code: DQ200
• Vehicle Equipment: for vehicles with direct shift transmission
• See accessories list for additionally required parts:
• Weight [kg]: 0.023
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 7-Speed Dual-Clutch Transmission, 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.