• Engine Code: CLHA
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• for OE number: 03L 906 051 B
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-AU-003
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: JPN

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Overall Length [mm]: 70
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Spanner Size: 16
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• General Information: pressure difference sender
• Manufacturer: BORSEHUNG

• Engine Code: CLHA
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• for OE number: 04L 906 088 E
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-VW-016
• Cable Length [mm]: 830
• Manufacturer: NTY

• General Information: pressure sensor
• Manufacturer: VIKA

• Construction Year from: 01.2013
• Engine Code: CLHA
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 04L 906 088 B
• Overall Length [mm]: 770
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: Orange
• Fabrication Number: EGT-VW-033
• Cable Length [mm]: 620
• Manufacturer: NTY

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 03L906051B
• Manufacturer: MEAT & DORIA

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• Number of circuits: 4
• Resistor [Ohm]: 3.9
• Length [mm]: 750
• Conductor Number: 4
• Cable Length [mm]: 750
• Oxygen Sensor: Heated
• Name: MM OSM170
• Manufacturer: MAGNETI MARELLI

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DELPHI

• Construction Year from: 01.2013
• Construction Year to: 05.2015
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 840
• Overall Length [mm]: 980
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO

• Number of pins: 2
• Fabrication Number: EGT-VW-084
• Cable Length [mm]: 530
• Manufacturer: NTY

• Construction Year from: 01.2013
• Construction Year to: 05.2015
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 620
• Overall Length [mm]: 760
• Number of pins: 2
• Connector Shape: oval
• Socket colour: Orange
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009409161

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 1,060
• Name: SONDA LAMBDA A3, Q2, Q3 11-
• Manufacturer: DLP

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 530
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Name: SW 30 10 0853
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8V-D-000 001
• Engine Code: CLHA
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Construction Year from: 01.2013
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Voltage [V]: 12
• Cable Length [mm]: 620
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: after soot particulate filter
• Construction Year from: 01.2013
• Construction Year to: 05.2015
• Number of pins: 2
• Cable Length [mm]: 660
• Sensor Type: PTC
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: MEY

• Construction Year from: 01.2013
• General Information: Sold in Hitachi brand: printing and packaging
• Name: HI 2507407
• Manufacturer: HITACHI

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Construction Year from: 01.2013
• Voltage [V]: 12
• Cable Length [mm]: 840
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV060

• Construction Year from: 01.2013
• Fitting Position: after soot particulate filter
• Thread Size: M14x1,5
• Cable Length [mm]: 666
• Socket colour: Orange
• Manufacturer: FAE

• Fitting Position: after soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 615
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Thread Size: M14x1,5
• Length [mm]: 935
• Manufacturer: MAGNETI MARELLI

• Number of connectors: 2
• Fitting Position: after soot particulate filter
• Weight [kg]: 0.07
• for OE number: 04L 906 088 B
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2013
• Exhaust System: before turbocharger
• Manufacturer: ASHIKA

• Exhaust System: after soot particulate filter
• Cable Length [mm]: 620
• Number of pins: 2
• Manufacturer: DELPHI

• Exhaust System: before soot particulate filter
• for OE number: 03L 906 051 B
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: D Shape
• Weight [kg]: 0.029
• Number of pins: 3
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2015
• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Fitting Position: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 835
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• for OE number: 04L 906 262 A, 04L 906 262 C
• Cable Length [mm]: 540
• Number of pins: 6
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-019

• Fitting Position: before exhaust turbocharger
• Component Number: G 235
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Sensor Type: NTC Sensor
• Cable Length [mm]: 530
• Overall Length [mm]: 553
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Connector Shape: D Shape
• Spanner Size: 17
• Supplementary Article/Info 2: with heat shield pipe, with cable
• Bolt Head-/Nut Design: Hexagon
• Shape: Bent
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Length [mm]: 1,216
• Number of circuits: 5
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-AU-017
• Manufacturer: NTY

• General Information: Exhaust Gas Temperature Sensor
• Manufacturer: VIKA

• General Information: Exhaust Gas Temperature Sensor
• Manufacturer: VIKA

• Fitting Position: after soot particulate filter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 615
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT010376271
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before soot particulate filter
• Number of connectors: 2
• Weight [kg]: 0.07
• for OE number: 04L 906 088 E
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Cable Length [mm]: 850
• Socket colour: brown
• Fitting Position: before soot particulate filter
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 04L 906 088 B
• Name: Andur, heitgaasitemperatuur
• Manufacturer: TRU

• Construction Year from: 01.2013
• Fitting Position: before soot particulate filter
• Thread Size: M14x1,5
• Cable Length [mm]: 881
• Socket colour: brown
• Manufacturer: FAE

• Engine Code: CLHA
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Cable Length [mm]: 840
• Quality: OE EQUIVALENT
• for OE number: 172000229010
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) from: 8V-D-000 001
• Engine Code: CLHA
• Operating Mode: Electric
• Voltage [V]: 5
• Conductor Number: 2
• Cable Length [mm]: 880
• Thread Size: M14 x 1,5
• Total Length [mm]: 970
• Fitting Position: before soot particulate filter
• Name: Andur, heitgaasitemperatuur
• Manufacturer: PIE

• Exhaust System: before soot particulate filter
• Block Separation:
• Quantity: 1
• Vehicle Identification Number (VIN) from: 8V-D-000 001
• Cable Length [mm]: 840
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS30090

• Construction Year from: 01.2013
• Cable Length [mm]: 835
• Number of pins: 2
• Guarantee: 5 years guarantee
• Fitting Position: before soot particulate filter
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 880
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasitemperatuur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before exhaust turbocharger
• Overall Length [mm]: 693
• Cable Length [mm]: 530
• Fitting Depth [mm]: 18
• Connector Shape: D Shape
• Connecting thread: M14x1.5-6h
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Construction Year to: 05.2015
• Fitting Position: after soot particulate filter
• Cable Length [mm]: 615
• Manufacturer: BOSCH

• Engine Code: CLHA
• Vehicle Identification Number (VIN) from: 8V-D-000 001
• Number of pins: 2
• Fitting Position: after soot particulate filter
• Manufacturer: VDO

• Engine Code: CLHA
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: CLHA
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.552
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Construction Year to: 05.2015
• Fitting Position: before soot particulate filter
• Cable Length [mm]: 835
• Name: Andur, heitgaasitemperatuur
• Manufacturer: BOS

• Engine Code: CLHA
• Number of pins: 2
• Fitting Position: before soot particulate filter
• Manufacturer: VDO

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Oxygen Sensor: Heated
• General Information: lambda probe; 5 wire
• Manufacturer: VIKA

• Oxygen Sensor: Broadband oxygen sensor
• Number of pins: 5
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• for OE number: 04L906262C
• Manufacturer: MEAT&DORIA

• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 530
• Number of pins: 2
• Manufacturer: METZGER

• Oxygen Sensor: Regulating Probe
• Number of pins: 5
• Cable Length [mm]: 560
• Version: IAM
• Manufacturer: METZGER

• Voltage [V]: 12
• for OE number: 04L907807BQ
• Fitting Position: behind exhaust turbocharger
• Cable Length [mm]: 790
• Number of pins: 5
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Cable Length [mm]: 790
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Name: DE ANS1061-12B1
• Manufacturer: DELPHI

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Exhaust System: before catalytic converter
• for PR number: 7CP
• Voltage [V]: 12
• Cable Length [mm]: 890
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 71SKV068

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: CLHA
• Fitting Position: Particulate Filter, after catalytic converter
• Connector Shape: D Shape
• Conductor Number: 5
• Length [mm]: 570
• Cable Length [mm]: 460
• Number of pins: 6
• Weight [kg]: 0.108
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.