• Installatsiooni pool: Esisild
• Üldine informatsioon: Spring support; front spring disc
• Manufacturer: BORSEHUNG

• Installatsiooni pool: Tagasild
• Üldine informatsioon: spring support; down
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Axle: Independent wheel suspension
• Vehicle Equipment: for vehicles without reinforced shock absorbers
• Suspension: for vehicles without electronic suspension control
• Name: COC 49495773
• Manufacturer: CORTECO

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle
• Suspension: for vehicles with standard suspension
• for PR number: 0K0, 1JA, 1JC
• Name: COC 49483041
• Manufacturer: CORTECO

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: AD-VW-034
• Manufacturer: NTY
• Name: NTY AD-VW-034

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: AD-VW-035
• Piirangutega toode/piirangu info 2: ilma laagrita
• Manufacturer: NTY
• Name: NTY AD-VW-035

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: AD-VW-033
• Manufacturer: NTY
• Name: NTY AD-VW-033

• Engine Code: CUNA
• Width [mm]: 127
• Thickness [mm]: 40
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.31
• Manufacturer: FEB
• Lisainfo: 44799 FEBI
• Additional information: 44799 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Height [mm]: 40
• Bearing Type: Ball Bearing
• Name: Laager - K„„ndmik VW P. AUDI, SKODA
• Manufacturer: MEY
• Lisainfo: 1006410020
• Additional information: 1006410020

• Engine Code: CUNA
• not for PR number: 0K0, UA6, UA7
• Block Separation:
• Thickness [mm]: 63
• Material: Aluminium, PU (Polyurethane)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.388
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: Laager,amorditugilaager
• Manufacturer: SKF

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!

• Engine Code: CUNA
• for PR number: 0K0
• Height [mm]: 55
• Inner Diameter [mm]: 12
• Material: Aluminium
• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.3
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Üldine informatsioon: Rubber and dust cover kit;rear
• Manufacturer: VIKA

• Installatsiooni pool: Tagasild
• Üldine informatsioon: Rubber and dust cover kit;rear
• Manufacturer: VIKA

• Engine Code: CUNA
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 127
• Inner Diameter [mm]: 78
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78.5
• Outer Diameter [mm]: 127.5
• Bearing Type: Ball Bearing
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Rear Axle
• Weight [kg]: 0.415
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• Name: TG TED22900
• Manufacturer: TEDGUM

• Installatsiooni pool: Tagasild mõlemapoolselt
• Jämedus/Tugevus (mm): 60
• Kaal (kg): 0,34
• vajaminev tükihulk: 2
• Materjal: Alumiinium
• Siseläbimõõt [mm]: 10
• Laagritüüp: Kummi-metalllaager
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Manufacturer: LEMFORDER

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 803 024
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Alternative Repair Kit: 118 038
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N4
• Axle: Four-Link Axle
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.392
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 2
• Construction Year from: 10.2014
• Construction Year to: 10.2014
• Installatsiooni pool: Tagasild
• Kaal (kg): 0,34
• vajaminev tükihulk: 2
• Jämedus/Tugevus (mm): 60
• Siseläbimõõt [mm]: 10
• Materjal: Alumiinium
• Laagritüüp: Kummi-metalllaager
• Üldine informatsioon: Shock absorber upper cover
• Manufacturer: VIKA

• Installatsiooni pool: Tagasild
• Üldine informatsioon: Rubber and dust cover kit;rear
• Manufacturer: VIKA

• Installatsiooni pool: Tagasild
• Üldine informatsioon: Rubber and dust cover kit;rear
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without rolling bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 94 0171
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 0K0, 1JA, 1JC
• Fitting Position: Rear Axle
• Manufacturer: BILSTEIN
• Name: BI 12-281442
• Quality class: Q

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Name: Laager,amorditugilaager
• Manufacturer: SAA

• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Production date from: 06/12
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• for OE number: 5Q0412331F
• Manufacturer: SASIC

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N4
• Axle: Four-Link Axle
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: SACHS

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N4
• Axle: Four-Link Axle
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LMI

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B Name: Laager - K„„ndmik. VW T. LEON/GOLF VII/SPORTSVAN/OCTAVIA 12- LE/PR

• Production date from: 06/12
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Manufacturer: SASIC

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 814018310
• Manufacturer: FAG

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Aluminium
• Weight [g]: 431
• Thickness [mm]: 60
• Inner Diameter [mm]: 10
• Name: IM 37975
• Manufacturer: ORIGINAL IMPERIUM

• Axle: Rigid Axle, Independent wheel suspension
• Block Separation:
• Installatsiooni pool: Tagasild
• Manufacturer: KAVO PARTS

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Installatsiooni pool: esisild paremal, esisild vasakul
• Laagritüüp: Kummipuks
• Pikkus (mm): 41,2
• Kaal (kg): 0,798
• Siseläbimõõt [mm]: 14,1
• Manufacturer: RTS

• Installatsiooni pool: Tagasild
• Üldine informatsioon: Shock absorber upper cover
• Manufacturer: VIKA

• Quantity: 2
• Jämedus/Tugevus (mm): 40
• Laius (mm): 127
• Kaal (kg): 0,31
• Laagriteostus: Rulllaager
• Siseläbimõõt [mm]: 78
• Välisläbimõõt [mm]: 127
• Materjal: Plastik, Metall
• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Üldine informatsioon: deep groove ball thrust bearing; front
• Manufacturer: BORSEHUNG

• Quantity: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,8
• vajaminev tükihulk: 2
• Siseläbimõõt [mm]: 14
• Laagritüüp: Kummi-metalllaager
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Üldine informatsioon: Shock absorber top rubber; front
• Manufacturer: VIKA

• for OE number: 5Q0412249C
• Fitting Position: Front Axle
• Weight [g]: 1,123
• Supplementary Article/Info 2: with ball bearing
• Component Number: 2
• Bearing manufacturer: IMPERGOM
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: IMP

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Manufacturer: KYB
• Name: KY SM9924

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Installatsiooni pool: Esisild
• Manufacturer: DENCKERMANN AMORTYZATORY

• Construction Year to: 05.2017
• Axle: Independent wheel suspension
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Name: Vedruamordi tugilaager
• Manufacturer: BIL
• Quality class: Q

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: MEY

Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF

Name: PODUSZKA AMORT. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- Z O½YSKIEM

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Replace in pairs only:
• for components see parts list:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: BILSTEIN
• Name: BI 12-243945

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Weight [kg]: 1.066
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BIL
• Quality class: Q

Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- LE/PR LE/PR B1

• Engine Code: CUNA
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.1
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Front Axle
• Name: KY SM1051
• Manufacturer: KYB

• Engine Code: CUNA
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.3
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM I —RUBAMI!!!

• Quantity: 2
• Installatsiooni pool: Esisild
• Üldine informatsioon: Shock absorber rubber kit; front
• Manufacturer: BORSEHUNG

• Vehicle Identification Number (VIN) from: 8V-D-000 001
• Construction Year to: 01.2017
• Installatsiooni pool: esisild mõlemapoolselt
• Kaal (kg): 1,1
• Siseläbimõõt [mm]: 14
• Piirangutega toode/piirangu info 2: koos laagriga
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Weight [kg]: 1.3
• Supplementary Article/Info 2: with rolling bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 15.1
• Packaging width [cm]: 8.4
• Packaging height [cm]: 14.6
• Manufacturer: MONROE

• Engine Code: CUNA
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.3
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Name: SW 30 94 5497
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Materjal: Kumm/metall
• Piirangutega toode/piirangu info 2: koos laagriga
• Osade arv [-osaline]: 2
• Manufacturer: METZGER