• Switch pressure from [bar]: 0.55
• Switch pressure to [bar]: 0.85
• Colour Coding: brown
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Colour Coding: grey
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.008
• for OE number: 079 919 523 H S1
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: FEB
• Additional information: 107210685
• Lisainfo: 107210685

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 2.5
• General Information: Oil pressure sensor; 2.5Bar
• Manufacturer: VIKA

• Engine Code: CJXF
• Vehicle type: S3Quattro
• Pressure [bar]: 1
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Quantity: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Number of connectors: 1
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• General Information: Oil pressure sensor
• Manufacturer: VIKA

• Quantity: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Number of connectors: 1
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• General Information: Oil pressure sensor
• Manufacturer: VIKA

• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: brown
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,55 - 0,85
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CJXF
• Colour: brown
• Thread Size: M10x1
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Fabrication Number: ECC-AU-004
• Socket colour: brown
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NTY
• Name: NTY ECC-AU-004

• for OE number: 95510612500
• Manufacturer: KAMOKA

• Fabrication Number: ECC-AU-009
• Thread Size: M10x1,0
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Socket colour: blue
• Manufacturer: NTY
• Name: NTY ECC-AU-009

• Number of pins: 1
• Supplementary Article/Info 2: without sensor, with plug, without cable
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Colour Coding: grey
• Fabrication Number: ECT-VW-000
• Manufacturer: NTY
• Name: NTY ECT-VW-000

• Connector Shape: oval, D Shape
• Colour Coding: grey
• Sensor Type: NTC Sensor
• Number of pins: 2
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M10x1
• Spanner Size: 22
• Colour Coding: brown
• Number of pins: 1
• Pressure from [bar]: 0.55
• Pressure to [bar]: 0.85
• Name: OLISURVELšLITUS
• Manufacturer: MAX
• Lisainfo: 21-0359
• Additional information: 21-0359

• Quantity per packing unit: 3
• Number of connectors: 2
• Manufacturer: 3RG

• Pressure [bar]: 8.5
• Housing Colour: dark-brown
• Thread Size: M10x1.0
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Engine Code: CJXF
• Colour: brown
• Pressure to [bar]: 0.85
• Pressure from [bar]: 0.55
• Pressure [bar]: 0.7
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: CJXF
• Colour: brown
• Pressure to [bar]: 0.85
• Pressure from [bar]: 0.55
• Pressure [bar]: 0.7
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Switch Pressure [bar]: 0.7
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Colour Coding: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 0.7
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Number of pins: 1
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Socket Width [mm]: 1.5
• Contact surface: Tin-plated
• Assy./disassy. by qualified personnel required!:
• Name: Kaabli remondikomplekt, olirohuandur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 9018
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Control Range [bar]: 0.55/0.85BAR
• Colour: brown
• General Information: Oil pressure sensor; 1 pin; brown; 0.55-0.85 BAR
• Manufacturer: BORSEHUNG

• Switch Pressure [bar]: 2.5
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Pressure [bar]: 2.5
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• General Information: Evaporator temperature sensor
• Manufacturer: VIKA

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.15
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.555
• Pressure to [bar]: 0.85
• Number of pins: 1
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL008280031
• Manufacturer: HELLA

• Fabrication Number: ECT-AU-006
• Manufacturer: NTY

• Engine Code: CJXF
• Colour Coding: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Supplementary Article/Info 2: with clamp holder
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: CJXF
• Colour Coding: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Manufacturer: ERA

• Colour: black
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Name: Andur, ktusetemperatuur
• Manufacturer: MAX

• Pressure [bar]: 0.24
• Housing Colour: blue
• Thread Size: M10
• Diameter [mm]: 12
• Spanner Size: 24
• Number of pins: 1
• Name: DE SW90062
• Manufacturer: DELPHI

• Engine Code: CJXF
• Fitting Position: Cylinder Head
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• General Information: Coolant temperature sensor
• Manufacturer: VIKA

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: CJXF
• Colour: blue
• Pressure to [bar]: 2.95
• Pressure from [bar]: 2.15
• Pressure [bar]: 2.5
• Thread Size: M10x1
• Spanner Size: 24
• Corresponds to the original part in colour: violet
• Manufacturer: FACET

• Colour Coding: blue
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Switch point from [bar]: 2.15
• Switch point to [bar]: 2.95
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Control Range [bar]: 2.15/2.95BAR
• Colour: blue
• General Information: Oil pressure sensor; 1 pin; blue; 2.15-2.95 BAR
• Manufacturer: BORSEHUNG

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour Coding: grey
• Corresponds to the original part in colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Version: IAM
• Article number of recommended accessories: 0899250, 0905513
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: CJXF
• Colour: blue
• Pressure to [bar]: 2.95
• Pressure from [bar]: 2.15
• Pressure [bar]: 2.5
• Thread Size: M10x1
• Spanner Size: 24
• Corresponds to the original part in colour: violet
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Length [mm]: 24
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fabrication Number: ECP-AU-029
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 06K919523
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Fabrication Number: ECP-AU-037
• Manufacturer: NTY

• Supplementary Article/Info 2: without pipe
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: CJXF
• Housing Colour: grey
• Housing Type: Aluminium Housing
• Manufacturer: FACET

• Quantity: 1
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11473

• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX
• Lisainfo: 21-0216
• Additional information: 21-0216

• Engine Code: CJXF
• Housing Colour: grey
• Housing Type: Aluminium Housing
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168731

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 06H 906 433 D
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: TP6, TT6
• Number Installed: 2
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• General Information: Camshaft position sensor
• Manufacturer: VIKA

• General Information: Crankshaft position sensor
• Manufacturer: VIKA

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: NRF

• Sensor Type: Hall Sensor
• Manufacturer: FAE ELEKTRYKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: oval
• Socket colour: black
• Overall Length [mm]: 58.5
• Supplementary Article/Info 2: without cable
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 06H 906 433 D
• Name: SW 33 10 3124
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CJXF
• Required quantity: 1
• Name: EP 1.953.793
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Thread Size: 12 mm
• Manufacturer: VERNET

• Name: Andur, v„ntvoll
• Manufacturer: DLP

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Resistor [Ohm]: 870
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 33
• Connector Shape: oval
• Rated Voltage [V]: 12
• Manufacturer: ERA