• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle both sides
• General Information: dust boot
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 172
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.07
• Name: KAITSEMšTS/KAITSEKUMM,AMORT
• Manufacturer: FEB
• Lisainfo: 46720 FEBI
• Additional information: 46720 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: A-AU-031
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Observe technical data:
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Fabrication Number: A-AU-032
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Article number of recommended accessories: PK442
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Name: CFD 560205
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Piston Rod Diameter [mm]: 13
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: CFD 560210
• Manufacturer: DACO

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Length [mm]: 647
• Length 2 [mm]: 404
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Diameter 1 [mm]: 38
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7465G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 56
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 56
• Manufacturer: ASHIKA
• Lisainfo: MA-00827
• Additional information: MA-00827

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 11
• Socket Width 1 [mm]: 45
• Name: AMORTYZATOR AUDI T. A3 1,0TFSI-2,0TFSI 12-20 LE/PR
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Suspension: for vehicles with increased ground clearance
• Article number of recommended accessories: 1007410007, 72-5702
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Distance of mounting bores [mm]: 45
• Name: Amort
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Length 1 [mm]: 640
• Length 2 [mm]: 650
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 45
• Name: AMORTYZATOR AUDI T. A3 1,0TFSI-2,0TFSI 12-20 LE/PR
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Diameter [mm]: 45
• Length [mm]: 650
• Manufacturer: KAVO

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 56
• Name: AMORT
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Suspension: for vehicles with standard suspension
• for PR number: 1JN, 1JC
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Axle: Four-Link Axle
• Article number of recommended accessories: 72-3367
• Name: Amort
• Manufacturer: MAX

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Diameter [mm]: 50
• max. length [mm]: 550
• Shock Absorber Mounting Type: Top pin

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Fabrication Number: A-AU-030
• Fitting Position: Front Axle Left, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension Strut Outer Diameter [mm]: 50
• Length [mm]: 550
• Observe technical data:
• Replace in pairs only:
• Manufacturer: NTY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-AU-029
• Manufacturer: NTY

• Fitting Position: Front Axle
• Length [mm]: 549
• Length 2 [mm]: 382
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 50
• Diameter 2 [mm]: 32
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7521G
• Manufacturer: MAGNETI MARELLI
• Additional information: 7521G MM
• Lisainfo: 7521G MM

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ABAKUS LORO

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Support plate diameter [mm]: 50
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-3367
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5822
• Additional information: MGA-5822

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Name: MM 8098G
• Manufacturer: MAGNETI MARELLI

• Suspension: for vehicles with increased ground clearance
• Article number of recommended accessories: 100 741 0007, 100 740 0022
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Distance of mounting bores [mm]: 45
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Support plate diameter [mm]: 55
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• for PR number: 0N4, G01, G02, G07, G11, G16, G21, G24
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Front Axle
• Housing Diameter [mm]: 50
• Shock Absorber Type: Gas Pressure
• Article number of recommended accessories: SMJ0196
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Housing Diameter [mm]: 50
• Shock Absorber Type: Gas Pressure
• Article number of recommended accessories: SMA0196
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: ASHIKA-AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Name: MM 8048G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Article number of recommended accessories: PK442, MK503, PK424
• Shock Absorber Type: Gas Pressure
• Sleeve Length [mm]: 59
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.93
• Bore Diameter [mm]: 25
• Observe technical data:
• Piston Rod Diameter [mm]: 12.4
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Shock absorber eyelet diameter [mm]: 45
• max. length [mm]: 650
• Name: Amort
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Axle: Multi-link Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Shock absorber eyelet diameter [mm]: 59
• max. length [mm]: 625
• Name: Amort
• Manufacturer: KYB
• Additional information: 3448024 KAYABA
• Lisainfo: 3448024 KAYABA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Piston Rod Diameter [mm]: 11
• Shock absorber eyelet diameter [mm]: 45
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• for PR number: 0N4, G01, G02, G03, G04, G05, G06, G07
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Lisainfo: 19-232362
• Additional information: 19-232362

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version

• Fitting Position: Front Axle
• Block Separation:
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: OYODO

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control, for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 640 0017, 100 412 0141, 100 641 0141
• Housing diameter in clamping area [mm]: 50
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with increased ground clearance, for vehicles with bad road version

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Diameter [mm]: 55
• Manufacturer: KAVO PARTS

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Housing Diameter [mm]: 50
• Shock Absorber Type: Gas Pressure
• Article number of recommended accessories: SM0196
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Name: AMORT
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-394366, GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Suspension Strut Outer Diameter [mm]: 50
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-394366, GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.43
• Bore Diameter [mm]: 32
• Observe technical data:
• Length 1 [mm]: 382
• Length 2 [mm]: 549
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK411, PK422
• Packaging length [cm]: 56.8
• Packaging width [cm]: 17.2
• Packaging height [cm]: 17.2
• Housing diameter in clamping area [mm]: 50
• Manufacturer: MONROE
• Lisainfo: 742116SP MON
• Additional information: 742116SP MON

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• for PR number: 1JA, 1JC
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV30/13X170A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Axle: Four-Link Axle
• Name: Amort
• Manufacturer: SAA
• Lisainfo: 318 202
• Additional information: 318 202

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: KAYABA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Suspension Strut Outer Diameter [mm]: 50
• Length [mm]: 550
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• Length 1 [mm]: 604
• Length 2 [mm]: 640
• Piston Rod Diameter [mm]: 14
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Quality class: Q
• Name: Gas shock absorber

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version for PR number: G01, G02, G03, G04, G05, G06, G07, 0K2, 0N1, 1JA, 1JN

• Vehicle configuration line / variant: S line
• for PR number: 0N4, G03, G04, G05, G06, G07
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Lisainfo: 22-232342
• Additional information: 22-232342

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version

• for PR number: 0N4, G01, G02, G07, G11, G16, G21, G24
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle configuration line / variant: S line
• for PR number: 0N4, G03, G04, G05, G06, G07
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Multi-link Axle
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-262208
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• General Information: shock absorber; front; gas
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for combined PR number: 2UA+G01, 2UA+G02, 2UA+G21, 2UA+G22
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: ST32/22X175A
• Shock Absorber Mounting Type: Top pin
• Housing Diameter [mm]: 50
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• for combined PR number: 2UA+G03, 2UA+G04, 2UA+G14, 2UA+G23, 2UA+G24
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: ST36/25X167A
• Shock Absorber Mounting Type: Top pin
• Housing Diameter [mm]: 55
• Name: Amort
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• General Information: gas-filled shock absorber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• General Information: gas-filled shock absorber; front
• Manufacturer: BORSEHUNG

• for PR number: 0N1, G02, G03, G04, G05, G07
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• Shock Absorber System: Monotube
• Name: BI 24-229883
• Manufacturer: BILSTEIN

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• for PR number: G02, G03, G04, G05, G07, 0N4
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top pin
• Length [mm]: 677
• Axle: Multi-link Axle
• Vehicle Equipment: for vehicles without level control
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• for PR number: 0N1, G02, G01, G07, G16, G21, G24
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Name: BI 35-229865
• Lisainfo: 35-229865
• Additional information: 35-229865

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Suspension: for vehicles with sports suspension
• for PR number: G03, G04, G05, G07, G02, G06, G25, G28, G29, G32
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-229919
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

for PR number: 0N1, G03, G04, G05, G07, G02, G06, G25, G28, G29, G32 Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"