• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 6
• Supplementary Article/Info 2: without cable, with plastic socket
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: CJSA
• Colour Coding: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Engine Code: CJSA
• Colour Coding: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• General Information: temperature sensor
• Manufacturer: VIKA

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Name: Kaabliparanduskomplekt, ktuserohu andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: ECM-AU-001
• Number of pins: 4
• Manufacturer: NTY
• Name: NTY ECM-AU-001

• Number of pins: 4
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Length [mm]: 24
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fabrication Number: ECP-AU-029
• Manufacturer: NTY

• General Information: pressure sensor
• Manufacturer: VIKA

• Quantity: 2
• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Engine Code: CJSA
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV348

• Engine Code: CJSA
• Housing Colour: grey
• Housing Type: Aluminium Housing
• Manufacturer: FACET

• Engine Code: CJSA
• Housing Colour: grey
• Housing Type: Aluminium Housing
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX
• Lisainfo: 21-0216
• Additional information: 21-0216

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Quantity: 2
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11473

• Number of pins: 4
• Manufacturer: JPN

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 079 919 523 B
• Width [mm]: 67
• Height [mm]: 68
• Length [mm]: 40
• Weight [g]: 28
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Connector Shape: D Shape
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: TA8, TF5
• Number Installed: 2
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG
• Lisainfo: SPA196
• Additional information: SPA196

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA VW GOLF 1,9TDI 00-
• Manufacturer: BRM

• Sensor Type: Hall Sensor
• Manufacturer: FAE ELEKTRYKA

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CJSA
• Required quantity: 2
• Name: EP 1.953.793
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Suction Pipe
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Mounting Type: Clipped
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Fitting Position: Suction Pipe
• Connector Shape: oval
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CJSA
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: CJSA
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Fitting Position: Fuel Line (high pressure side)
• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV050
• Manufacturer: ESEN SKV

• Quantity: 1
• Number of pins: 4
• Pressure from [kPA]: 16
• Name: DE PS20088-12B1
• Manufacturer: DELPHI

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: CZUJNIK CI—N. POWIETRZA AUDI A1 1.4TFSI 14-
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 8V-D-000 001
• Vehicle Identification Number (VIN) to: 8V-G-000 001
• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, ohumassimootja
• Manufacturer: HBE

• Vehicle Identification Number (VIN) from: 8V-D-000 001
• Pressure to [bar]: 280
• Number of pins: 3
• Manufacturer: FAE ELEKTRYKA

Manufacturer: BOSCH

• General Information: pressure sensor
• Manufacturer: VIKA

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: Low Pressure Side
• Fuel Mixture Formation: Manifold Injection/Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Engine Code: CJSA, CJSB
• External Thread [mm]: M10 X 1 MM
• Spanner Size: 27
• Tightening Torque [Nm]: 27
• Name: CZUJNIK CI—N. PALIWA VW PASSAT 15-
• Manufacturer: PIE

• Number of connectors: 3
• Weight [kg]: 0.041
• for OE number: 06J 906 051 F
• Name: Andur,ktuserohk
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: NRF

• Construction Year from: 11.2015
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Vehicle Equipment: for vehicles with trailer hitch
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 780
• Name: DE ES21272-12B1
• Manufacturer: DELPHI

• Construction Year from: 11.2015
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Vehicle Equipment: for vehicles with trailer hitch
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 685
• Manufacturer: DELPHI ELEKTRONIKA

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Construction Year from: 11.2015
• Quantity: 1
• Vehicle Equipment: for vehicles with trailer hitch
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Fitting Position: after catalytic converter
• Cable Length [mm]: 910
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 11.2015
• Quantity: 1
• Vehicle Equipment: for vehicles with trailer hitch
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Fitting Position: after catalytic converter
• Cable Length [mm]: 780
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Construction Year to: 10.2015
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 801
• Name: DE ES21273-12B1
• Manufacturer: DELPHI

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Oxygen Sensor: Regulating Probe
• Fabrication Number: ESL-VW-014
• Cable Length [mm]: 710
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 1,050
• for OE number: 022906262BJ
• Manufacturer: MEAT & DORIA

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: ERA

• Engine Code: CJSA
• Construction Year to: 10.2015
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 800
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Number of mounting bores: 1
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: CJSA, CJSB
• Fitting Position: after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 660
• Quality: OE EQUIVALENT
• for OE number: 0258010388
• Manufacturer: MEAT&DORIA

• Engine Code: CJSB
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 780
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: CJSB
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 710
• Name: Lambda andur
• Manufacturer: BOS

• Number of mounting bores: 1
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Engine Code: CJSB
• Fitting Position: before catalytic converter
• Block Separation:
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• for PR number: VF1
• Supplementary Article/Info 2: Aluminium Pedal Cover
• Number of mounting bores: 1
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: CJSA
• Oxygen Sensor: Regulating Probe
• Number of pins: 5
• Overall Length [mm]: 710
• Version: IAM
• Manufacturer: METZGER

• Production date from: 12.05.2015
• Vehicle Equipment: for vehicles with factory mounted tow bar
• Trailer Hitch: for vehicles with towbar preparation
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Manufacturer: METZGER

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Exhaust System: before catalytic converter
• for PR number: 7CP
• Voltage [V]: 12
• Cable Length [mm]: 890
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 71SKV068

Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring