• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Material: FPM (fluoride rubber)
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10 mm

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Thickness [mm]: 11
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Lisainfo: Oil seal for crankshaft, 85x105x11 mm

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Width 1 [mm]: 9
• Width 2 [mm]: 11
• Housing Type: with housing
• Lisainfo: Seal flange for crankshaft

• Quantity: 1
• Installatsiooni pool: stirnseitig
• Kaal (kg): 0,016
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Materjal: ACM((Polyacryl-Kautschuk)
• vajaminev tükihulk: 1
• Jämedus/Tugevus (mm): 10
• Üldine informatsioon: seal ring;35*48*10 mm
• Manufacturer: VIKA

• Installatsiooni pool: ees
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Seerianumber: NUP-VW-012

• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Swirl Type: Right-hand Twist
• Fitting Position: frontal sided
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Dust Cover: with dust lip
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)
• Fitting Position: frontal sided
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: frontal sided, transmission sided
• Height [mm]: 11
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Swirl Type: Left-hand Twist
• Dust Cover: with dust lip
• Manufacturer: DELLO AUTOMEGA

• Engine Code: KP
• Fitting Position: frontal sided
• Height [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: ACM (Polyacrylate)
• Manufacturer: BGA USZCZELKI

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING

• Fitting Position: frontal sided
• Engine Code: KP
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Manufacturer: REINZ
• Name: RN 81-24292-10

• Installatsiooni pool: stirnseitig
• Kõrgus (mm): 10
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Pöördeliik: Paremkeere
• Tüüp simmerling tihend: ASW
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01967

• Engine Code: KP
• Fitting Position: frontal sided
• Inner Diameter 1 [mm]: 35
• Outer Diameter 1 [mm]: 48
• Height 1 [mm]: 10
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Swirl Type: Right-hand Twist
• for OE number: 034115137A
• Name: CO 12010739
• Manufacturer: CORTECO

• Inner Diameter [mm]: 35
• Thickness [mm]: 10
• Outer Diameter [mm]: 48
• Fitting Position: frontal sided
• for OE number: 054 115 147 B
• Weight [kg]: 0.02
• Material: FPM (fluoride rubber)
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING

• Engine Code: KP
• Fitting Position: transmission sided
• Height [mm]: 12
• Outer Diameter 1 [mm]: 105
• Inner Diameter 1 [mm]: 85
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: BGA USZCZELKI

• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Laius (mm): 11
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Dust Cover: with dust lip
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Fitting Position: transmission sided
• Alternative Repair Kit: 105 753
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: frontal sided
• General Information: shaft oil seal
• Manufacturer: BORSEHUNG

• Fitting Position: transmission sided
• Engine Code: KP
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Radial Shaft Seal Design: A SL
• Swirl Type: Left-hand Twist
• Height 1 [mm]: 9
• Manufacturer: REINZ
• Name: RN 81-23708-40
• Lisainfo: 81-23708-40

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Radial Shaft Seal Design: ASW
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 829.056
• Manufacturer: ELRING
• Lisainfo: 342.093 ELR

• Thickness [mm]: 11
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Material: FPM (fluoride rubber)
• Fitting Position: transmission sided
• Weight [kg]: 0.058
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 5
• Thickness [mm]: 11
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Fitting Position: transmission sided
• Weight [kg]: 0.103
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info 2: koos flantsiga
• Installatsiooni pool: kastipoolselt
• Seerianumber: NUP-VW-006
• Manufacturer: NTY

• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange
• Outer Diameter [mm]: 111
• Inner Diameter [mm]: 85
• Height [mm]: 16
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 85
• Outer Diameter 1 [mm]: 105
• Height 1 [mm]: 12
• Material: FPM (fluoride rubber)
• Swirl Type: Left-hand Twist
• Dust Cover: with dust lip
• Name: CO 12012347
• Manufacturer: CORTECO

• Quantity per packing unit: 5
• Installatsiooni pool: kastipoolselt
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: transmission sided
• Housing Type: with housing
• Housing material: Cast Aluminium
• Alternative Repair Kit: 101 407
• Sealing lip material: PTFE (polytetrafluoroethylene)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Radial Shaft Seal Design: ASW
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: ELRING

• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,17
• Siseläbimõõt [mm]: 85
• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos flantsiga
• Üldine informatsioon: sealing flang; rear
• Manufacturer: VIKA

• Engine Code: KP
• Fitting Position: Pulley side
• Name: CO 289076
• Manufacturer: CORTECO

• Engine Code: KP
• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 85
• Outer Diameter 1 [mm]: 105
• Height 1 [mm]: 11
• Material: FPM (fluoride rubber)
• Supplementary Article/Info 2: with mounting sleeve
• Swirl Type: Alternating Twist
• for OE number: 068103071F
• Name: CO 12015257
• Manufacturer: CORTECO

• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Tüüp simmerling tihend: SP
• Korpusetüüp: koos korpusega
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01416

• Outer Diameter [mm]: 47
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Fitting Position: transmission sided
• Weight [kg]: 0.195
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,17
• Siseläbimõõt [mm]: 85
• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos flantsiga
• Üldine informatsioon: sealing flang; rear
• Manufacturer: VIKA

• Engine Code: KP
• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 85
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Height 1 [mm]: 15.7
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Swirl Type: Alternating Twist
• for OE number: 028103171B
• Name: CO 20033462
• Manufacturer: CORTECO

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Radial Shaft Seal Design: SP
• Swirl Type: Left-hand Twist
• Housing Type: with housing
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: ELRING
• Lisainfo: 804.850 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease