• Fitting Position: Front Axle Left, Front Axle Right, Front
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Fitting Position: Front, Front Axle, both sides
• Weight [kg]: 0.153
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: Puks - K„„ndmik VW P. POLO/A2/FABIA 02-
• Manufacturer: TED

• for OE number: 5Q0505223D, 5Q0505224D
• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Control/Trailing Arm Type: for trailing arm
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Lower, Front Axle Right
• for OE number: 1K0 407 182
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Manufacturer: CORTECO ZAWIESZENIE

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, Centre
• for OE number: 1K0 505 541 B
• Manufacturer: GSP

• Inner Diameter [mm]: 12
• Fitting Position: Rear Axle Upper, inner
• Required quantity: 2
• Weight [kg]: 0.14
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 38.8
• Manufacturer: TED

Name: Puks - K„„ndmik VW T. GOLF 04-/ A3 03-/ LEON/TOLEDO 05-

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Thickness [mm]: 54
• Outer Diameter 1 [mm]: 28
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Fitting Position: Rear Axle Upper
• Fabrication Number: ZTT-VW-001A
• Manufacturer: NTY

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 242
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front, Lower Front Axle
• Fabrication Number: ZTP-HD-025D
• Mounting Type: Rubber-Metal Mount
• Manufacturer: NTY

• Production date from: 09/14
• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Rear Axle, outer, Lower
• Vehicle configuration line / variant: AT WHEEL CARRIER
• Inner Diameter 1 [mm]: 49
• Outer Diameter 1 [mm]: 12
• Thickness 1 [mm]: 38
• Manufacturer: DELPHI
• Name: DE TD1058W

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Left, Rear Axle Right, Centre
• Material: Rubber/Metal
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Manufacturer: MERTZ

• Fitting Position: Rear Axle, Lower, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 50
• Name: ALT 94739AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/PASSAT/TOURAN
• Manufacturer: MEY

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• for OE number: 5Q0407182
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1079
• Manufacturer: DAYCO

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

• for OE number: 5Q0505223D, 5Q0505224D
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Control/Trailing Arm Type: for trailing arm
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: MEY
• Lisainfo: 1005050014
• Additional information: 1005050014

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 12
• Width [mm]: 32
• Quantity per axle: 2
• for OE number: 5Q0 407 182
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: outer, Rear Axle
• Required quantity: 2
• Weight [g]: 130
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Length [mm]: 50
• Name: IM 1724
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.205
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Packaging length [cm]: 5.4
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4.8
• Manufacturer: FEBEST

• Fitting Position: Centre, inner, Rear Axle
• Weight [kg]: 0.23
• Packaging length [cm]: 6
• Packaging width [cm]: 4.1
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Fitting Position: both sides, Front, Rear Axle
• Required quantity: 2
• Control/Trailing Arm Type: for trailing arm
• Outer Diameter [mm]: 60.2
• Weight [kg]: 0.17
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 45
• Name: ALT 88666AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Fitting Position: Front
• General Information: wishbone arm; front
• Manufacturer: VIKA

• Fitting Position: inner, Rear Axle Lower, in front of axle
• Weight [kg]: 0.121
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.9
• Manufacturer: FEBEST

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. GOLF7/A3 12-
• Manufacturer: LMI

• Fitting Position: outer, Rear Axle Lower
• Weight [kg]: 0.185
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.8
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Weight [kg]: 0.074
• Fitting Position: Rear Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 38.1
• Length [mm]: 45
• Manufacturer: RTS

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Length [mm]: 45
• Manufacturer: RTS

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, outer, Lower
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 37.4
• Width 1 [mm]: 50
• Width 2 [mm]: 28
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829064010

• Name: Puks
• Manufacturer: LMI

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front, outer

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 49
• Width [mm]: 37
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.13
• Name: Puks - K„„ndmik VW T. SUPERB/PASSAT/TOURAN 14-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, behind the axle
• Weight [kg]: 0.301
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Lower, Front
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.2
• Width 1 [mm]: 45
• Width 2 [mm]: 64
• SVHC: No SVHC present!
• Manufacturer: FAG

Name: TULEJA WAH. VW T. A3 (8V1, 8VK) —REDNICA 12,3X60,2 SZEROKOS 45/64

• for OE number: 5Q0505223D, 5Q0505224D
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW T. PASSAT/SHARAN 05- LE/PR
• Manufacturer: MEY
• Lisainfo: 1147110000/HD
• Additional information: 1147110000/HD

General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Name: SW 33 10 2842
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Upper, Front
• Weight [kg]: 0.23
• Packaging length [cm]: 6.4
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Weight [kg]: 0.18
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Diameter 1 [mm]: 12.1
• Diameter 2 [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Fitting Position: Rear Axle both sides, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.087
• Manufacturer: RTS

• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 47.5
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.102
• Manufacturer: RTS

• Weight [kg]: 0.091
• Quantity: 10
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 1.2
• Length [mm]: 40
• Thread Size: M6x1
• Manufacturer: FEBEST
• Lisainfo: 2398-002-PCS10 FEBEST
• Additional information: 2398-002-PCS10 FEBEST

• Inner Diameter [mm]: 12
• Fitting Position: both sides, Rear, Rear Axle, inner, Lower
• Outer Diameter [mm]: 47.5
• Weight [kg]: 0.102
• Required quantity: 2
• Control/Trailing Arm Type: for control arm
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, Lower, in front of axle
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 64
• Inner Diameter 2 [mm]: 12
• Outer Diameter 2 [mm]: 60
• Thickness 2 [mm]: 45
• Name: DE TD1785W
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Upper, behind the axle, inner
• Weight [kg]: 0.207
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 47
• Material: Rubber/Metal
• Shape: slotted
• Weight [kg]: 0.1
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Lower, inner, Rear Axle Right, Rear Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik VW T. A1/A3/LEON/OCTAVIA/GOLF VII 1,2TSI/1,4TFSI/1,6TDI/2,0TDI 12-

• Fitting Position: inner, behind the axle, Front Axle, Lower
• Shape: round
• Mounting Type: Press-fitted, Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Inner Diameter [mm]: 13.2
• Outer Diameter [mm]: 65
• Height [mm]: 49.7
• Name: Puks
• Manufacturer: TRI

• Inner Diameter [mm]: 12
• Fitting Position: inner, Rear Axle, Upper, both sides
• Control/Trailing Arm Type: for control arm
• Shore-A hardness value, base body: 90
• Weight [kg]: 0.13
• Required quantity: 2
• Supplementary Article/Info 2: with grease cap
• Outer Diameter [mm]: 38.6
• Material: PU (Polyurethane)
• Colour: yellow
• Manufacturer: TEDGUM
• Name: TG TED89665

• Supplementary Article/Info 2: with grease cap
• Required quantity: 2
• Shore-A hardness value, base body: 80
• Fitting Position: Front, both sides, Front Axle
• Weight [kg]: 0.22
• Outer Diameter [mm]: 33.7
• Colour: red
• Material: PU (Polyurethane)
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM

• Control/Trailing Arm Type: for control arm
• Shore-A hardness value, base body: 90
• Outer Diameter [mm]: 38.4
• Fitting Position: outer, Rear Axle, Upper, both sides
• Material: PU (Polyurethane)
• Supplementary Article/Info 2: with grease cap
• Required quantity: 2
• Inner Diameter [mm]: 14
• Weight [kg]: 0.2
• Colour: yellow
• Manufacturer: TEDGUM
• Name: TG TED81265

• Colour: yellow
• Supplementary Article/Info 2: with grease cap
• Fitting Position: Rear Axle, Front, both sides
• Shore-A hardness value, base body: 90
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60.4
• Control/Trailing Arm Type: for trailing arm
• Required quantity: 2
• Weight [kg]: 0.31
• Material: PU (Polyurethane)
• Manufacturer: TEDGUM
• Name: TG TED37720