• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outer Diameter 1 [mm]: 37
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Width [mm]: 61.7
• Height [mm]: 56.5
• Thickness [mm]: 15.3
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Ate-Teves
• Lisainfo: AUDI, VW
• Additional information: AUDI, VW

• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Weight [kg]: 0.07
• Manufacturer: VALEO

• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Quantity per packing unit: 10
• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Net Weight [g]: 17
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Packaging length [cm]: 8
• Name: KN KL15OF
• Manufacturer: KNECHT

• Quantity per packing unit: 10
• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Packaging length [cm]: 14
• Net Weight [g]: 17
• Packaging width [cm]: 3
• Packaging height [cm]: 3
• Manufacturer: MAHLE KNECHT

• Quantity per packing unit: 10
• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outlet Ø [mm]: 6
• Outer Diameter 1 [mm]: 37
• Outer Diameter 2 [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Filter type: In-Line Filter
• Outer Diameter 1 [mm]: 25
• Outlet Ø [mm]: 8
• Height [mm]: 80
• Manufacturer: PIERBURG

• Engine Code: FS
• Height [mm]: 118
• Fuel Type: Petrol
• Filter type: In-Line Filter
• External Thread [mm]: 6
• Outer Diameter [mm]: 48
• Manufacturer: MAGNETI MARELLI

• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: BOS

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• for OE number: 056 109 119 A
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 72
• Width [mm]: 20
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Supplementary Article/Supplementary Info: without accessories
• Width [mm]: 24
• Outer Diameter [mm]: 72
• Manufacturer: KAMOKA

• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 15,2
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Teves
• Lisainfo: Brake pad set, front, 15.2 mm
• Additional information: Brake pad set, front, 15.2 mm

• Construction Year from: 08.1976
• Driven Units: Camshaft
• Number of Teeth: 121
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Mechanical
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Construction Year from: 08.1976
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 121
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,153
• Name: Hammasrihm
• Manufacturer: GAT

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Width 1 [mm]: 61.8
• Height 1 [mm]: 56.8
• Thickness 1 [mm]: 15
• Brake System: ATE
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 0.93
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Transmission Type: Manual Transmission
• Quantity per packing unit: 4
• Diameter [mm]: 180
• Width [mm]: 31
• Net weight [kg]: 1.11
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 31
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 180
• Manufacturer: BREMBO
• Name: BR S 85 507

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 31
• Brake System: ATE
• Inner brake drum diameter [mm]: 180
• Manufacturer: LPR
• Name: LPR 00140

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 15.3
• Width [mm]: 61.7
• Height [mm]: 56.5
• Brake System: ATE
• Weight [kg]: 0.58
• Manufacturer: TOMEX BRAKES

• Width [mm]: 20.4
• Outer Diameter [mm]: 72
• Weight [kg]: 0.38
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Inner brake drum diameter [mm]: 200
• Manufacturer: LPR

• Construction Year from: 08.1976
• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Manual
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Outer Diameter [mm]: 72
• Width [mm]: 24
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA

• Fitting Position: Front Axle
• Article number of recommended accessories: 1987474003, 1987474137, 1987474051, 1987474042
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20228
• Thickness [mm]: 15
• Width [mm]: 61.9
• Height [mm]: 56.5
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• Height [mm]: 56.5
• Width [mm]: 61.7
• Thickness [mm]: 15.3
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Thickness [mm]: 7.5
• Friction Surface Width [mm]: 29
• Supplementary Article/Supplementary Info: with accessories
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Packaging length [cm]: 19.8
• Packaging width [cm]: 12.5
• Packaging height [cm]: 8.2
• Weight [kg]: 1.1
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: TEX

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.2
• Units/Pulleys: incl. tensioner pulley
• for OE number: 051 198 119
• Observe service information:
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 200
• Manufacturer: BREMBO
• Name: BR S 85 508

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.2
• Units/Pulleys: incl. tensioner pulley
• for OE number: 051 198 119
• Observe service information:
• Name: SW 30 02 0040
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake Pad: with lining
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Brake Pad: with lining
• Brake Size: 200x400
• Manufacturer: BOSCH

• Construction Year from: 08.1976
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Number of Teeth 1: 121
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 1
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: BOS

• Construction Year from: 08.1976
• Belt Width [mm]: 18
• Colour: black
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Construction Year from: 08.1976
• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.64
• Number of Teeth: 121
• Width [mm]: 18
• contains more articles than the OE kit (art. no.): 056 198 119
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Construction Year from: 08.1976
• Number of Teeth: 121
• Width [mm]: 18
• Number of belts: 1
• Weight [kg]: 0.56
• for article number: KD122
• Manufacturer: DOLZ