• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 6
• Supplementary Article/Info 2: without cable, with plastic socket
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Connector Shape: D Shape
• Number of pins: 2
• Housing material: GRP (Glass fibre Reinforced Plastic), PA 66 GF 30
• Sensor Type: NTC Sensor
• Number of mounting bores: 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: temperature sensor
• Manufacturer: VIKA

• Thread Size: 12 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Name: Kaabliparanduskomplekt, ktuserohu andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Sensor Type: NTC Sensor
• Fitted Diameter [mm]: 12
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Housing Colour: black
• Name: Andur,sisendohu temperatuur
• Manufacturer: DLP

• Engine Code: CRTC
• Required quantity: 1
• Manufacturer: FACET

• Engine Code: CRTC
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Length [mm]: 24
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fabrication Number: ECP-AU-029

• Number of connectors: 2
• Weight [kg]: 0.012
• for OE number: 06B 905 379 D
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: intake air temperature sensor
• Manufacturer: BORSEHUNG

• Engine Code: CRTC
• Voltage [V]: 12
• Manufacturer: FAE
• Additional information: NRF33227
• Lisainfo: NRF33227

• Number of pins: 3
• Fitting Position: Cylinder Head
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Engine Code: CRTC
• Manufacturer: FACET

• Quantity: 1
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11473

• Engine Code: CRTC
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• for OE number: 079 919 523 B
• Width [mm]: 67
• Height [mm]: 68
• Length [mm]: 40
• Weight [g]: 28
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG
• Lisainfo: SPA196
• Additional information: SPA196

• Required quantity: 1
• Engine Code: CRTC
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: ECM-AU-007
• Manufacturer: NTY

for PR number: T2P, T2S, T7V, TU8

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Sensor Type: Hall Sensor
• Manufacturer: FAE ELEKTRYKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Engine Code: CRTC
• Required quantity: 1
• Name: EP 1.953.793
• Manufacturer: EPS

• Required quantity: 1
• Number of pins: 2
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 200
• Wire cross-section [mm²]: 0,5
• Manufacturer: METZGER

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Quantity: 1
• Number of pins: 3
• Manufacturer: DELPHI ELEKTRONIKA

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• General Information: pressure difference sender
• Manufacturer: BORSEHUNG

• Fabrication Number: ECS-AU-007
• Manufacturer: NTY

• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV409

• Connector Shape: oval
• Number of connectors: 4
• Colour: black
• Number of pins: 3
• Manufacturer: VEMO GERMANY

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Cable Length [mm]: 500
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Supplementary Article/Supplementary Info: with shrink/solder connector
• for OE number: 4D0971993
• Manufacturer: MEAT&DORIA

• Exhaust System: before soot particulate filter
• Manufacturer: NRF

• Length [mm]: 74
• Pressure to [bar]: 1
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Pressure from [bar]: 0.14
• Pressure from [kPA]: 14
• Pressure to [kPA]: 100
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV787

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Name: CZUJNIK CI—N. SPALIN AUDI A4, SQ7 QUATTRO 14-
• Manufacturer: DLP

• Emission Standard: Euro 5
• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, ohumassimootja
• Manufacturer: HBE

• for OE number: 059 906 088 CN
• Fitting Position: EGR valve at manifold
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Fabrication Number: EGT-AU-034
• Cable Length [mm]: 275
• Manufacturer: NTY

• Fabrication Number: EGT-VW-080
• Cable Length [mm]: 550
• Manufacturer: NTY

• for OE number: 059 906 088 CP
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: D Shape
• Socket colour: black
• Fabrication Number: EGT-AU-033
• Cable Length [mm]: 650
• Manufacturer: NTY

Manufacturer: BOSCH

• Fabrication Number: EGT-AU-055
• Cable Length [mm]: 220
• Manufacturer: NTY

• for OE number: 4M0 906 088 AD
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: D Shape
• Socket colour: black
• Fabrication Number: EGT-AU-032
• Cable Length [mm]: 285
• Manufacturer: NTY

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.029
• Name: SW 33 11 0444
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, andur (ohuvotu rohk)
• Manufacturer: HBE

• General Information: pressure sensor
• Manufacturer: VIKA

Manufacturer: NRF KLIMATYZACJA

Manufacturer: BOSCH

• Fitting Position: Left, Fuel Rail
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Thread Length [mm]: 12.5
• Spanner Size: 27
• Operating Pressure [bar]: 2,000
• Number of pins: 3
• Mounting Type: Bolted
• Housing Colour: black
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,200
• Number of pins: 3
• Socket colour: black
• Manufacturer: FAE ELEKTRYKA

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 220
• Overall Length [mm]: 380
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Name: VA 368877
• Manufacturer: VALEO

• not for OE number: 059906051H
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Engine Code: CRTC
• Fitting Position: EGR Valve, EGR valve at manifold
• for OE number: 059 906 088 CN
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Shape: Bent
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV391

• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: before exhaust turbocharger
• Component Number: G 235
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Sensor Type: NTC Sensor
• Cable Length [mm]: 790
• Overall Length [mm]: 855
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Connector Shape: D Shape
• Spanner Size: 17
• Supplementary Article/Info 2: with cable, with heat shield pipe
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: L Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Thread Size: M18 x 1,5
• Spanner Size: 27
• Number of pins: 3
• Name: Andur,ktuserohk
• Manufacturer: MEY

• Engine Code: CRTC
• Cable Length [mm]: 390
• Number of pins: 4
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Fitting Position: after EGR cooler
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 262
• Thread Size: M12x1.0
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Required quantity: 1
• Fitting Position: after soot particulate filter
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Required quantity: 1
• Fitting Position: before exhaust turbocharger
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 692
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Engine Code: CRTC
• Fitting Position: after soot particulate filter
• for OE number: 4M0 906 088 AB
• Overall Length [mm]: 670
• Cable Length [mm]: 540
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Weight [kg]: 0.09
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV380

• for OE number: 4M0 906 088 K
• Cable Length [mm]: 220
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.08
• Shape: Bent
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV383

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Fitting Position: Exhaust Gas Recirculation, Soot Particulate Filter
• for PR number: T7V
• Block Separation:
• Production date to: 21.06.2021
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Engine Code: CRTC
• for OE number: 4M0 906 088 N
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before catalytic converter
• Socket colour: black
• Weight [kg]: 0.08
• Shape: L Shape
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV414

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 215
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Number of connectors: 3
• External Thread [mm]: M18 X 1,5 MM
• Spanner Size: 27
• Tightening Torque [Nm]: 100
• Name: Andur,ktuserohk
• Manufacturer: PIE