• Fitting Position: Rear Axle
• Length [mm]: 390
• Brake System: TRW
• Manufacturer: JP GROUP A/S
• Lisainfo: Sensor, brake pad wear
• Additional information: Sensor, brake pad wear

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Component Number: G17
• Name: Andur,v„listemperatuur
• Manufacturer: HAN

Housing material: Plastic, GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for brake disc diameter [mm]: 318, 338
• Fitting Position: Front Axle
• Length [mm]: 283
• Brake System: ATE
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake pad wear
• Additional information: Sensor, brake pad wear

• Number of pins: 2
• Connector Shape: D Shape
• Consult accessories list for recommended additional repairs:
• Name: NIVOOLšLITI, PESUVEEKOGUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without sensor, without cable, with a plug
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• Supplementary Article/Info 2: with plug, without cable
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug
• Number of wires (repair kit, cable set): 2
• Conductor Number: 2
• Assy./disassy. by qualified personnel required!:
• Name: Kaabli paranduskomplekt, v„listemperatuuri andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• General Information: Exterior temperature sensor
• Manufacturer: VIKA

• Fitting Position: outer
• Name: Andur,v„listemperatuur
• Manufacturer: MAX

• Fabrication Number: ECT-AU-003
• Manufacturer: NTY

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Info 2: without sensor, with plug, without cable
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV702

• Number of connectors: 2
• Colour: black
• Fitting Position: Front
• Weight [kg]: 0.004
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: Fuel temperature sensor
• Manufacturer: VIKA

• Fitting Position: Behind the radiator, Fuel pump to filter
• Thread Size: M12x1,5 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV673

• General Information: Coolant temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Name: Andur, ktusetemperatuur
• Manufacturer: MAX

• Surface: primed
• Sensor Type: Ultrasonic Sensor
• Fitting Position: both sides, Rear, inner, Front, outer, Centre
• Fabrication Number: EPDC-AU-016
• Manufacturer: NTY

• Supplementary Article/Info 2: with plug, with cable
• for OE number: 4D0971993
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Kaabliparanduskomplekt, ktuserohu andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• Number of connectors: 2
• Manufacturer: ERA

• General Information: Exterior temperature sensor
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DEUA
• Colour: grey
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Required quantity: 2
• Fitting Position: Rear Axle
• Total Length [mm]: 75.5
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• General Information: Coolant temperature sensor
• Manufacturer: BORSEHUNG

• Fitting Position: Front
• Number of pins: 2
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: DEUA
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring, without cable
• Socket colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Total Length [mm]: 75.5
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218471

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Quantity per axle: 2
• Length [mm]: 76
• Braking/Driving Dynamics: for vehicles with ABS
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Required quantity: 2
• Fitting Depth [mm]: 47.5
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Thread Size: M 12x1.5
• Number of pins: 2
• Housing Colour: brown
• Manufacturer: FAE

• Production date to: 05.06.2018
• Number of pins: 3
• Fitting Position: Cylinder Head
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DEUA
• Colour: black
• Plug Type: Screw Contact
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fitting Position: Front, Footwell
• Vehicle Equipment: for vehicles with automatic climate control
• Number of pins: 2
• Connector Shape: angled
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Colour: black
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: DEUA
• Colour: black
• Plug Type: Screw Contact
• Manufacturer: FACET

• Fitting Position: Rear Axle
• Overall Length [mm]: 70
• Manufacturer: BOSCH

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Quantity per axle: 2
• Length [mm]: 81
• Braking/Driving Dynamics: for vehicles with ABS
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: with screw
• for OE number: 04L 906 433 B
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV015
• Manufacturer: ESEN SKV

Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear

• for OE number: 04E 919 501 B
• Length [mm]: 40
• Guarantee: 3 years guarantee
• Number of pins: 2
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Number of pins: 3
• Manufacturer: DELPHI ELEKTRONIKA

• Sensor Type: NTC Sensor
• Number of pins: 2
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Connector Shape: oval
• Spanner Size: 17
• Bolt Head-/Nut Design: Male Star
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP107

• Engine Code: DEUA
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.01
• for OE number: 059 919 523 A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: FEB
• Additional information: FE106318
• Lisainfo: FE106318

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 04E919501B
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Fitting Position: Left, Right, inner, outer, Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV014

• General Information: Crankshaft position sensor
• Manufacturer: VIKA

Fabrication Number: ECP-VW-009

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.01
• for OE number: 059 919 523 A
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 10 6318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: NRF

• Fitting Position: Front Axle
• Overall Length [mm]: 80
• Manufacturer: BOSCH

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 17
• for OE number: 04L919824C
• Manufacturer: MEAT & DORIA

• Fitting Position: Front, Rear
• Manufacturer: FAST

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11480

• Fitting Position: Left, Right, inner, outer, Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV071

• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: D Shape
• Supplementary Article/Info 2: with screw, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 03.2018
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.013
• for OE number: 04E 919 501 B
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: angled
• Fitting Position: Air duct, to interior blower
• Housing material: GRP (Glass fibre Reinforced Plastic), PA 6 GF 30
• Always compare old and new part (in particular OE No.):
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Emission Standard: Euro 5
• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, ohumassimootja
• Manufacturer: HBE

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.01
• Name: SW 33 10 8160
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Engine Code: DEUA
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Fitting Position: Front, Rear
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV096

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Engine Code: DEUA
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358380651
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Front, outer
• Manufacturer Restriction: Renault, VAG
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Plug Type ID: Code B
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabliparanduskomplekt, olisurvelliti
• Manufacturer: HBE

• Fabrication Number: ECC-AU-011
• Manufacturer: NTY
• Name: NTY ECC-AU-011

• for PR number: TM4, TD1
• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, andur (ohuvotu rohk)
• Manufacturer: HBE

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Alternative Repair Kit: 551676
• Manufacturer: ERA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS20794
• Manufacturer: DELPHI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE ELEKTRYKA

• Fitting Position: Front, inner, outer
• Block Separation:
• Colour Code: GRU
• Colour: black
• Surface: primed
• Number of pins: 3
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN HANS PRIES

for combined PR number: GP1+7X2+K8B, GP1+7X2+K8D, GP1+7X2+K8X, GP1+7X5+K8B, GP1+7X5+K8D, GP1+7X5+K8X, GP1+7X2+K8B+2K3, GP1+7X2+K8D+2K3, GP1+7X2+K8B+2K7, GP1+7X2+K8D+2K7, GP1+7X5+K8B+2K3, GP1+7X5+K8D+2K3, GP1+7X5+K8B+2K7, GP1+7X5+K8D+2K7 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Inductive Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Outer Diameter [mm]: 12
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 05E 907 601 D
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Engine Code: DEUA
• Required quantity: 1
• Name: EP 1.953.774
• Manufacturer: EPS

• Fabrication Number: ECM-AU-005
• Manufacturer: NTY
• Name: NTY ECM-AU-005

• Engine Code: DEUA
• Required quantity: 1
• Manufacturer: FACET

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI