• Engine Code: DEUA
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• Number of pins: 3
• Manufacturer: JPN

• General Information: pressure sensor
• Manufacturer: VIKA

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 03L906051B
• Manufacturer: MEAT&DORIA

• General Information: Pressure difference sensor
• Manufacturer: BORSEHUNG

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• Manufacturer: NRF

• Overall Length [mm]: 70
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Spanner Size: 16
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• General Information: Pressure difference sensor
• Manufacturer: BORSEHUNG

• Engine Code: DEUA
• for OE number: 04L 906 051 C
• Number of pins: 3
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Number of circuits: 1
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV664

• Engine Code: DEUA
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• General Information: Pressure difference sensor
• Manufacturer: BORSEHUNG

• Engine Code: DEUA
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV352

• for OE number: 8W0 906 088 B
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-AU-035
• Cable Length [mm]: 420
• Manufacturer: NTY

• Number of pins: 3
• Pressure [Pa] from: 48,500
• Pressure [Pa] to: 400,000
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051B
• Manufacturer: MEAT&DORIA

• for PR number: T98
• Guarantee: 5 years guarantee
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: DEUA
• Number of pins: 3
• Connector Shape: D Shape
• Number of circuits: 1
• Number of mounting bores: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 420
• Overall Length [mm]: 560
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Name: VA 368919
• Manufacturer: VALEO

• Socket colour: black
• Fabrication Number: EGT-AU-054
• Cable Length [mm]: 490
• Manufacturer: NTY

• Number of pins: 2
• Socket colour: black
• Fabrication Number: EGT-AU-040
• Cable Length [mm]: 900
• Manufacturer: NTY

Lisainfo: ENG. 2.0TDI AUDI A4 B8/9 07-19,A5 13-20,A6 12-18,Q5 17-20 /PRZED TURBOSPRARK¸ Additional information: ENG. 2.0TDI AUDI A4 B8/9 07-19,A5 13-20,A6 12-18,Q5 17-20 /PRZED TURBOSPRARK¸

• Fabrication Number: EGT-AU-038
• Cable Length [mm]: 750
• Manufacturer: NTY

Lisainfo: ENG. 2.0TDI AUDI B9 15- /ZA FILTREM CZ¸STEK STAœYCH Additional information: ENG. 2.0TDI AUDI B9 15- /ZA FILTREM CZ¸STEK STAœYCH

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DELPHI

• Exhaust System: before soot particulate filter
• Engine Code: DEUA
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009409161

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after soot particulate filter
• Component Number: G 527, G 648
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: Orange
• Sensor Type: PTC
• Cable Length [mm]: 810
• Overall Length [mm]: 940
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Connector Shape: D Shape
• Connecting plug material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Engine Code: DEUA
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409581
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• for OE number: 03L906051D
• Manufacturer: MEAT&DORIA

• Exhaust System: before soot particulate filter
• for OE number: 03L 906 051 B
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Name: SW 30 10 0853
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DEUA
• for OE number: 8W0 906 088 B
• Cable Length [mm]: 420
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.08
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV408

• for OE number: 8W0 906 088 F
• Overall Length [mm]: 880
• Cable Length [mm]: 750
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Socket colour: beige
• Weight [kg]: 0.09
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV394

Manufacturer: BOSCH

• Construction Year to: 12.2017
• Required quantity: 1
• Fitting Position: before exhaust turbocharger
• Block Separation:
• Construction Year from: 12.2018
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 892
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Engine Code: DEUA
• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051C
• Manufacturer: MEAT&DORIA

• Emission Standard: Euro 6+
• Fitting Position: after soot particulate filter
• for PR number: 7MM
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 30
• Cable Length [mm]: 715
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• for PR number: TD1
• Number of pins: 3
• Connection Diameter (pressure side) [mm]: 8
• Connection Diameter (suction side) [mm]: 8
• Number of connectors: 2
• Manufacturer: METZGER

• Construction Year to: 12.2017
• Fitting Position: before exhaust turbocharger
• Required quantity: 1
• Engine Code: DEUA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 892
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358226371
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 11.2017
• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: DEUA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 497
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358226281
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after soot particulate filter
• Emission Standard: Euro 6+
• Required quantity: 1
• for PR number: 7MM
• Engine Code: DEUA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 750
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358226311
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 831
• Name: DE ES21182-12B1
• Manufacturer: DELPHI

• Fitting Position: before catalytic converter
• Manufacturer: BOSCH

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• for PR number: T98
• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Manufacturer: METZGER

• Fitting Position: after soot particulate filter
• Manufacturer: BOSCH

• Fitting Position: before exhaust turbocharger
• Manufacturer: BOSCH

• Fitting Position: before catalytic converter
• External Thread Size: M14 x 1,5
• Number of connectors: 2
• Cable Length [mm]: 497
• Weight [kg]: 0.057
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: after soot particulate filter
• Emission Standard: Euro 6
• External Thread Size: M14 x 1,5
• Number of connectors: 2
• Cable Length [mm]: 750
• Weight [kg]: 0.068
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for combined PR number: TD1+7CF, TD1+7MM, TD1+7MW
• Fitting Position: before soot particulate filter
• Name: DRM 02369
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Exhaust System: before soot particulate filter
• Check OE number:
• Voltage [V]: 12
• Cable Length [mm]: 1,010
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.35
• Always compare old and new part (in particular OE No.):
• Name: CE 71SKV024
• Manufacturer: ESEN SKV

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: before soot particulate filter
• Emission Standard: Euro 6
• Engine Code: DEUA
• for PR number: 4BF, 7CP, 7CS
• Cable Length [mm]: 1,005
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: after soot particulate filter
• Manufacturer: BOSCH

• for combined PR number: TD1+7CF, TD1+7MM, TD1+7MW
• Fitting Position: before soot particulate filter
• Manufacturer: METZGER